BDS Suspension 6" Lift Kit 19-22 Ram 6.7L Cummins 3500 w/ Factory Air

BDS Suspension 6" Lift Kit 19-22 Ram 6.7L Cummins 3500 w/ Factory AirHaving a 3500 with the factory air suspension means you have a do it all truck. Only downside to that is that the suspensions are more complicated. Thankfully, BDS has engineered many options to get your truck lifted up to fit larger wheels and tires. These 6" kits retain full functionality of the factory rear air ride and on road comfort while improving offroad capability. Up front these systems use a pair of progressive rate 6" coil springs to

Having a 3500 with the factory air suspension means you have a do-it-all truck. Only downside to that is that the suspensions are more complicated. Thankfully, BDS has engineered many options to get your truck lifted up to fit larger wheels and tires. These 6" kits retain full functionality of the factory rear air-ride and on-road comfort while improving offroad capability.

Up front these systems use a pair of progressive rate 6" coil springs to provide the extra height and smooth controlled performance in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles along with a HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets reposition the OE sway bar along with extended polyurethane bump stops to correctly limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height, a pair of heavy duty replacement radius arms are supplied to bolt in place of the factory arms. Two options are available for the front suspension arms, 4-Link Long Arms and Radius Arms. Both are massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

At 6" of lift, it is critical to correct the front driveline angle to maintain use of the 4WD. To do this, BDS Suspension provides a heavy duty replacement transmission crossmember as well as a transfer case indexing ring to reposition the front driveline output to allow use of the factory drivelines. In the rear, a 5" lift block and u-bolts are supplied to lift and level the stance along with a heavy duty air bag spacer brackets. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX2 series or FOX 2.0 shocks.

Front Suspension Arm Options

4 Link Long Arms - The heart of this system is the 4-link conversion that replaces the factory radius arm. Key benefits include to doing this include increased stability, wheel travel, and improved handling across all terrains. The 4-link design limits caster change to less than 1-degree of change throughout wheel travel for better handling, steering control, and overall driveability. Included are a pair of massive frame-mounted brackets precision welded and engineered to locate the new upper and lower control arms to create the optimal suspension geometry for late model RAM trucks. The 4-link brackets are fabricated from 1/4" thick steel and wrap around the frame as well as the factory radius arm brackets to create an extremely sturdy mount for the new arms. Removal of the factory radius arm brackets is not required and allow the brackets to stay intact to speed up the installation time and make these kits reversible. The upper and lower control arms are built from 2" OD x 3/16" wall DOM tubing for the strength to take any abuse you can throw at them. They utilize large 2.5" OD polyurethane bushings to isolate road vibrations and are formed inward to allow for extra tire clearance while repositioning the front axle slightly forward for increase tire clearance to the backside of the front fenders when turned. These arms are finished in a durable textured black powder coating and use grease fittings for easy servicing.

Radius Arms - The 6" Radius Arm Drop System uses a pair of 1/4" thick steel radius arm relocation brackets to reposition the factory radius arms and correct suspension geometry and caster at 6" of lift. These brackets are designed for quick installation and create a stout mounting location for the radius arms by tying into both the factory radius arm frame mount and the side of the frame rails.

Sway Bar Disconnects

This kit allows a standard Ram heavy-duty trucks to enjoy the added articulation of a disconnected sway bar. The new sway bar links are made from 7/8" solid steel bar and feature greaseable, high-misalignment polyurethane bushings. All mounting hardware is included for simple, bolt on installatio

Front Adjustable HD Track Bar

These new track bars are a massive upgrade to the factory unit, constructed from 1-3/8? solid steel stock reinforced with gusseted ends to handle whatever on-road and off-road abuse you can through at it. Adjustments are made at the 1-3/8?-12 fine threaded center turnbuckle with pinchbolt ends to allow easy tuning to properly recenter the front axle for a range of lift heights. The track bar is formed for proper clearance around critical front end components and is designed to easy installation without the need to clearance the factory frame and axle mounts. Both ends use high-durometer polyurethane bushings with thick-walled steel sleeves for strength and reliability. Parts come with a high quality textured black powdercoat finish for a great look and excellent corrosion resistance. The are designed for use on 0-3" of lift and can be used in combination with most aftermarket track bar brackets to be used on taller lift heights.

Stainless Steel Braided Brake Lines

Kevlar lined Stainless Steel Braided Brake Lines. Virtually no volumetric expansion Firmer brake pedal feel with less pedal effort. Hose assemblies comply with D.O.T. Federal regulations (MVSS-106) Legal for street use in all 50 States. Teflon inner core (chemically inert) Approved for use with all brake fluids, including D.O.T. 5 Silicone. Resists moisture, Very flexible. Five layer construction Rugged construction that resists road shock and hazards. Higher fitting pull-off than other D.O.T. assemblies. Standard SAE female fittings and ends Utilizes standard brake fittings and hardware.

Carrier Bearing Drop Kit

The kit comes with multiple shim plates for full adjustability from 1/8" to 1-1/2" of drop. Includes necessary hardware. For all 3"+ Lift Kits.