1989-98 Nissan 240SX S13/S14 Lightweight 2 Piston Front Drag Racing Kit - 001-0327-1

1989-98 Nissan 240SX S13/S14 Lightweight 2 Piston Front Drag Racing Kit - 001-0327-11989 98 Nissan 240SX S13 S14 Lightweight 2 Piston Front Drag Racing Kit 001 0327 1 TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors.

1989-98 Nissan 240SX S13/S14 Lightweight 2 Piston Front Drag Racing Kit - 001-0327-1

TBM Brakes afford racers one of the lightest and highest performing brake setup on the market. These brakes have proven themselves in every realm from Top Fuel Dragsters to Hot Rod Drag Week and everything in between. TBM is quickly becoming the winning edge in brake system design. With a revolutionary design TBM Brakes has lower drag and friction than competitors. Lower rolling resistance means quicker ET and better overall performance as well as longer pad life.

Included in this kit:

• DR-1 2 piston calipers 002-0044SSP-1 / 002-0044SSP-2
• #1 Standard F1 Pads 6-1019
• 10.75 x .310 steel revolution rotors 3-107531255625D
• Aluminum rotor hats 204-0210
• Aluminum caliper mounting brackets 17-0041
• Mounting Hardware Kit 017-0041
  

For custom bolt pattern please contact us directly, otherwise OE factory bolt pattern will be issued.

Installation of this kit will require 3AN lines that are sold separately

TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.

 This Kit Fits:

• 1989-94 S13 Nissan 240 w/ 5 lug conversion
• 1995-99 S14 Nissan 240 w/ 5 lug
• Kit Weight 12.4 LBS

*Please use red Loctite on all rotor bolts*

***Please note, when using aftermarket studs with this brake kit, if the shank protrudes past the face of the hub face, brake hat modification (hole enlargement) may be required or the hat will not sit flat causing the rotor to not be true.***

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.