SKU: 42460057170

4-Piece Damascus Kiritsuke Bunka Knife Set — Fire Pattern Blades

Sale price$134.55 Regular price$149.50
Save 10%

Pay in installments of $37.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 20 - Sep 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

4-Piece Damascus Kiritsuke Bunka Knife Set — Fire Pattern BladesDamascus Kiritsuke Bunka Knife Set: This 4 piece set gives you precise control across every advanced kitchen task. Each blade is forged from layered Damascus steel with a wood grain fire pattern running the full blade length. The pattern shows real depth and structural layering built into the steel during forging. Four distinct blade profiles cover every prep task with accuracy. Slice proteins, prep vegetables, trim, and handle fine detail work all

Damascus Kiritsuke Bunka Knife Set: This 4-piece set gives you precise control across every advanced kitchen task. Each blade is forged from layered Damascus steel with a wood-grain fire pattern running the full blade length. The pattern shows real depth and structural layering built into the steel during forging.

Four distinct blade profiles cover every prep task with accuracy. Slice proteins, prep vegetables, trim, and handle fine detail work — all with the right knife for each task. This set fits professional culinary kitchens and serious home setups equally well.

4-piece Damascus Kiritsuke Bunka knife set at JW Steel Crafts with a wood-grain fire pattern, olive and rosewood two-tone handles, and no metal bolster — a clean artisan-made design built for precision performance.

The History Behind This Blade

Kiritsuke and Bunka knives originated in Japan as precision tools for professional kitchen work. Damascus steel forging gave Japanese bladesmiths a way to build hardness and flexibility into a single blade. Olive wood and rosewood have long been prized handle materials for their density, grip comfort, and natural beauty. At JW Steel Crafts, these traditions come together — each blade forged by hand and fitted with care.

Blade Performance

Each blade is forged from layered Damascus steel. The wood-grain fire pattern flows horizontally across the full blade length, structured, deep, and clearly visible from tip to spine. This forging method builds grain strength and sharp edge retention directly into the steel. Thin tapered edges cut through proteins, vegetables, and herbs with precise control and low resistance. Blades hold their edge well between sharpening sessions.

Handle Construction

Each handle uses two materials: light olive wood and a dark rosewood collar at the blade junction. The rosewood collar acts as a natural bolster. No metal bolster is used; the wood-to-wood transition gives a clean, artisan-made finish. The grip sits balanced and comfortable in hand. Full tang runs the complete blade length through the handle for full structural strength and stability.

Best Used For

  • Precision slicing and push cutting with the Kiritsuke

  • Vegetable prep and controlled chopping with the Bunka

  • Multi-purpose slicing and chopping with the Santoku

  • Trimming, peeling, and fine detail work with the Petty

  • Advanced professional kitchen preparation

  • Gifting — chefs, culinary enthusiasts, collectors

  • Collector's item and historically inspired display piece

Specifications Table

Feature

Details

Set Pieces

4 knives

Blade Material

Layered Damascus steel

Blade Pattern

Wood grain fire pattern

Blade Finish

Raw natural Damascus

Included Blades

Kiritsuke knife, Bunka knife, Santoku knife, Petty knife

Handle Material

Olive wood with rosewood collar

Bolster

Rosewood wood collar — no metal bolster

Pin Detail

None visible — bonded construction

Tang

Full tang on all pieces

Storage

Not included

Type

Japanese-style precision kitchen knife set

FAQs

Q: What knives are included in this Damascus Kiritsuke Bunka Knife Set?
The set includes a Kiritsuke, Bunka, Santoku, and Petty knife, four forged blades covering precision slicing, vegetable prep, and fine detail work.

Q: What blade pattern do these knives have?
Each blade has a wood-grain fire pattern, long horizontal flowing lines forged across the full blade length, giving each knife a distinct natural look.

Q: What makes a Kiritsuke knife different from a chef knife?
The Kiritsuke has a pointed angled tip and longer flat edge. It gives more precision for slicing and advanced cutting techniques than a standard chef knife.

Q: Are olive and rosewood handles durable?
Yes. Both materials are dense, moisture-resistant, and stable under daily use. The two-tone combination also gives each knife a clean artisan-made appearance.

Q: Is this set suitable for professional kitchens?
Yes. Full tang construction, forged Damascus blades, and four task-specific profiles support continuous professional kitchen performance.

Q: Is this set a good gift for a chef?
Yes. The fire pattern blades, olive and rosewood handles, and four-knife configuration make it a strong collectible gifting choice for serious cooks.

Q: How should these Damascus knives be maintained?
 Hand wash only. Dry immediately after each use. Apply food-safe oil occasionally to protect the blade surface and maintain the fire pattern finish.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 42460057170

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Elton Smith
Lexington, US
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
H
Verified Purchase
hearmeout
Omaha, US
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review. I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work. This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine! My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs. I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away). Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?" I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks. One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration. The Creality titles the g-code with a filename that includes the estimate print time. I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then. What I like about the machine. 1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications. 2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all! 3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed! 4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use. 5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement. What I do not like: 1) The SD card has to be put into its slot upside down. 2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine. 3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had. 4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
S
Verified Purchase
Sid Hubbs
Waukegan, US
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out. I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you. A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine. Now for the machine itself... The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great. If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front. Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
R
Verified Purchase
ReluctantConsumer
Chelsea, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Waukegan, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026

recommand products