5-Color Pack Atacs AU

5-Color Pack Atacs AUCamo PEN Information the pack contains 011 mud 012 Tan 013 sand 015 coyote 020 Olive CAMO PEN is made from the highest quality materials! The paint The paint is water based acrylic, fused with polyvinyl resin and water based acrylic varnish. It will cure to become waterproof and scratch resistant after 24 to 36 hours. Cleaning the paint within the first hour is easy with a little warm water and soap. After the paint dries, it will need to be sanded

Camo-PEN Information

the pack contains

• 011 mud
• 012 Tan
• 013 sand
• 015 coyote
• 020 Olive

CAMO-PEN is made from the highest quality materials!

The paint

The paint is water-based acrylic, fused with polyvinyl resin and water-based acrylic varnish.
It will cure to become waterproof and scratch-resistant after 24 to 36 hours.
Cleaning the paint within the first hour is easy with a little warm water and soap.
After the paint dries, it will need to be sanded off or removed with an acrylic paint solvent.

The sponge

The sponge tips are specifically designed for our CAMO-PEN.
The highest quality sponges are die-cut into 15 mm circles for excellent application.

Coverage

Each CAMO-PEN contains 30 ml of paint and provides 1/2 m2 of coverage on non-porous surfaces.
It is possible to paint several items with one CAMO-PEN.

SAFETY

Although CAMO-PEN is made from water-based products and is environmentally non-toxic, it should not be ingested and may cause allergic skin reactions in some individuals.
If the paint comes into contact with the eyes, rinse for 5 to 15 minutes with clean, cold water.

INSTRUCTIONS

• Prepare the surface of the area you wish to paint by sanding with fine sandpaper or a sanding sponge; we recommend 250 grit or higher.
• If the surface is already rough or porous, you may skip sanding.
• Clean the area with acetone for metal parts or warm soapy water for plastic and allow it to dry completely before sanding.
• Shake the CAMO-PEN vigorously before each use!
• Unscrew the cap and remove the seal (we recommend keeping the seal if you plan to store the pen for more than a month).
• Screw the cap back on and then, when you gently squeeze the pen, the paint will be dispensed through the sponge opening.
• Be careful not to squeeze the pen too hard!
• Paint the desired area by gently dabbing the sponge tip onto the surface.
• Avoid painting as you would with a brush, as the back-and-forth motion may separate the sponge from the nozzle.
• If the paint becomes clogged, remove the entire top section and clean with warm water or use a stick to remove hardened paint.
• After applying the base coat and once it is dry to the touch, take one color at a time and gently apply it using very light movements to create a natural camouflage pattern from the sponge openings.
• Do this with each color of your choice over the entire surface you wish to paint until the desired result is achieved.

CAMO-PEN offers several advantages compared to traditional painting methods

FAST:

With CAMO-PEN, it is possible to have a fully customized painted pistol (rifle) in approximately 1 hour...
Yes, you read that right! One hour and you can have a custom, multi-layer, multi-color paint job that is dry to the touch!
Smaller items can be done even faster! CAMO-PEN paint is dry to the touch in just a few minutes and, with its pen-like design, customizing is as simple as drawing on your gear!

CLEAN:

The unique CAMO-PEN design means you won’t make a mess or spill paint everywhere.
Plus, you can paint your airsoft gun anywhere without worrying about spray paint fumes or staining your clothes!

EASY:

No dealing with brushes, cans, or hassle!
Just grab your CAMO-PEN and go!
Once you’re finished, simply put the cap back on and save the remaining paint for later.
With our custom-designed stencils, you can create awesome patterns in minutes!

LOW COST:

You can choose a CAMO-PEN set or even a single color for a fraction of the cost of spray paints or custom workshop paint jobs.
Plus, you’re not wasting half the paint on your project like you do with spray cans!

TEXTURE:

The unique CAMO-PEN design allows you to create a textured sponge finish.
This results in an unmatched grip surface on your gear, as well as reduced light reflection due to the texture’s shading effect!
Who wouldn’t want better control over their airsoft gun, radio, or any other gear they own?

Important information and such...

DRY TIME:

Dry to the touch/second coat in approximately 5–10 minutes depending on temperature and humidity.
The warmer and less humid it is, the faster it will dry!
Waterproof and scratch-resistant after 24–36 hours depending on temperature and humidity.

TOXICITY:

CAMO-PEN uses non-toxic, water-based paint.
This means most people, animals, and plants will not have any adverse reaction upon contact.
It is not safe for consumption and should be cleaned off the skin promptly in case of contact.

WATER RESISTANCE:

CAMO-PEN paint is water-resistant once cured.
After the paint has dried for approximately 24 to 36 hours, it can be fully submerged in water without adverse effects.
It is NOT recommended to use this paint on items that will be in contact with water 100% of the time.
Getting wet and then drying will not be a problem, but prolonged contact with water may cause the paint to begin breaking down.

SCRATCH RESISTANCE:

CAMO-PEN paint is scratch-resistant when fully cured (24–36 hours).
This means that when the paint has been properly applied to a clean, prepared surface and allowed adequate curing time, it should not scratch easily.
In most cases, the paint will "scuff" rather than "scratch."