IsoAcoustics Gaia II (set of 4)
SKU: 52077004157

IsoAcoustics Gaia II (set of 4)

$238.05 $264.50
Save 10%
No.2 Bestseller on 2pierres.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

IsoAcoustics Gaia II (set of 4)GAIA II Provides improved sound clarity and openness for floor standing speakers and subwoofers. 121 lbs (55KG) Max. INTRODUCTION About GAIA II speaker isolators GAIA II is designed for floor standing speakers and subwoofers weighing up to 121 lbs (55Kg). Finished in an elegant machined dark chrome metal housing, the GAIA II incorporates IsoAcoustics patented design principles to deliver extraordinary acoustic results. GAIA II provides a high degree

GAIA II

Provides improved sound clarity and openness for floor standing speakers and subwoofers. 121 lbs (55KG) Max.

INTRODUCTION

About GAIA II speaker isolators

GAIA II is designed for floor standing speakers and subwoofers weighing up to 121 lbs (55Kg). Finished in an elegant machined dark chrome metal housing, the GAIA II incorporates IsoAcoustics’ patented design principles to deliver extraordinary acoustic results. GAIA II provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness.

The sound stage blossoms to open up a three-dimensional image of natural, spatial sound.

Designed for floor standing speakers weighing up to 121 lbs or 55kg, the GAIA II will provide more openness and clarity, while reducing structural borne noise.

INSTALLATION

How to install
GAIA II isolators

Optimal results are achieved by installing the GAIA isolators with the logo facing the listening position, or rotated 180 degrees, to align the isolators with the speaker’s motive forces. Lift and place the speakers into position as the GAIA lower isolators will adhere to the supporting surface.

The GAIA’s are threaded into the base of the speaker or subwoofer to replace the existing spikes or feet. Threading the GAIA’s into the base of the speaker creates a strong connection with the speaker. With the top of the GAIA housing connected with the speaker and the bottom of the GAIA connected to the supporting surface, all of the energy is then managed by the GAIA’s internal isolator.

The GAIA II includes thread adaptors for sizes M6-1.0, M8-1.25 and ¼”-20. Alternative thread size adaptors are available upon request through IsoAcoustics distributors.

THREAD SIZES

Thread sizes for all speakers

GAIA isolators come with thread adaptors for the 3 most common thread sizes which fit the majority of speakers. Alternative thread sizes are available upon request through IsoAcoustics distributors.

TECHNOLOGY

Patented isolation technology

GAIA isolators are made from a high quality stainless steel construction, incorporating the IsoAcoustics design philosophy that combines precision and a passion to deliver extraordinary acoustic results.

GAIA II Carpet Spikes

Package includes: 4 units

Dimensions (WxH): 2.72″ x 0.9″ (69mm x 22mm)

Spike length:  0.6″ (15mm)

Material : Stainless Steel

How to install GAIA Carpet Disks

Tilt the speaker or subwoofer to raise the GAIA’s above the ground, then position the carpet spikes underneath the GAIA’s and lower the side back down. Repeat the process on the other side by tilting the other side of the speaker and position the Carpet Disks underneath the GAIA’s before lowering the speaker back down.

You might need to raise and lower each side of the speaker again until the carpet spikes are positioned level on the ground and are properly aligned underneath the GAIA isolators.

The carpet disks installation is the final step. The carpet disks should not be installed until after the GAIA’s are installed and the speaker or subwoofer is in its final position.

Tech

The carpet disks feature 0.6” (15mm) long spikes which provide a strong connection through the carpet to provide a solid foundation for the GAIA isolators.

Awards + Reviews

“…the GAIAs look superb – and what they’ll do to your music is magical.”

EISA

Best Product 2019-2020 –
Hi-Fi Upgrade

“The Gaias and Oreas have already enhanced the systems of more than one Stereophile writer and have reminded us of the pleasures of recommending well-designed, well-made, fairly priced products.”

Stereophile

Product of the Year WINNER 2019

“Install IsoAcoustics GAIAs, replacing whatever footers your speakers came with. In every instance I’m familiar with, the GAIAs produced a marked improvement in overall clarity…”

Stereophile

Product of the Year – Editors’ Choices 2018

"... IsoAcoustics GAIA III are a cut above average. Superbly built and finished, this is a quality product that will enhance your system’s sound and looks."

Audiograde

Best of 2021 Award

“The ease of use and sheer grip on the music is retained in full while its top end and midrange is opened up that bit more, elevating it to the next level and beyond its price bracket.”

Audiograde

“...but here I am finally at home with a set of Gaia feet and can still not believe the positive impact these feet have on my speakers... Do yourself a favour and try a pair..."

Stereo+

Product of the Year WINNER 2020-2021

Each year, The Absolute Sound’s staff choose components that truly stand out from the competition. This selective list is known as the Golden Ear Awards.

The Absolute Sound

Golden Ear Award 2020

“The improvement offered by the Gaia was for me noticeable and not subtle: Overall tightening up of the bass, better clarity, and more spacial accuracy of instruments in the sound stage.”

Audiophilia

Product of the Year WINNER 2020

“…the IsoAcoustics GAIA's blew me away. It’s a very easy one to award IsoAcoustics with the Pursuit Perfect Systems Best Necessity Product of 2018.”

Pursuit Perfect Systems HiFi

Necessity of 2018 Award

“Overall soundstage presence was more accurate, transparent and spatial...”

Hifi Pig

Outstanding Product Award

“Music just sounds right with them in place, and the price is right too.”

HiFi Choice

Recommended

“I imagined I might hear a bit of a difference between my plinth's original feet and the IsoAcoustics pucks. But the difference I heard was beyond my expectations.”

Stereophile

Recommended Components 2021

“…an across-the-board improvement in the sound … A remarkable product.”

Stereophile

Recommended Components 2018

“Superb fit and finish. Simple to assemble and install. Excellent customer support. High value. Jaw dropping potential and performance.”

Robert S. Youman

Positive Feedback

“…the improvement in low-level detail, resolution, image focus, clarity, bass attack, and decay, and transparency were … They were huge!”

Michael Fremer

Stereophile Magazine

“...instruments and voices were more precisely defined on the soundstage, which itself was wider and higher. A Remarkable Product.”

Robert Deutsch

Stereophile Magazine

“…greater clarity, better-controlled bass and a broader, deeper soundstage that’s easier to hear into. There are zero audible downsides."

Phil Wright

Darko Audio

“They are superior to all other isolation products for speakers out there…”

Jim Pavett

Pure Wave Audio

“These GAIAs are like putting premium sports tyres on a Porsche 911, simple as that. You’d do that if you bought a 911, wouldn’t you?”

Simon Wilce

Hi-Fi and Music Source

"I sat there immersed in the music, could not believe how could a system this good; could sound so much better in a matter of minutes. Ladies and Gentlemen, the IsoAcoustics GAIA Isolators are a remarkable product.”

Moreno Mitchell

Stereo Times

“If you want to hear what your loudspeakers really sound like, put them on a set of these support feet. It’s like your loudspeakers just got a significant upgrade!”

Tom Hackforth

HiFi +

“With every track, I consistently heard tighter bass and lower midrange, with greater focus and depth.”

Bob Barrett

HomeTheaterReview

“…introducing noteworthy focus and forcing an uptick in soundstage clarity. Simply Superb!”

Todd Anderson

AV Nirvana

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 52077004157

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 1843 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Sam
Dallas, US
★★★★★ 5
Almost a year after purchase and this printer has not let me down!
Color: Black, Style: ET-2800-B, Pattern Name: Printer
I wanted to wait to write a review on this printer to see how it held up over time. Happy to report, after almost a year, it is still working perfectly! I was very nervous about purchasing a printer since it was my first time having to shop for one and almost every printer I looked at had something negative to say about the product. After extensive research, I decided to take a leap with the Epson EcoTank 2800. I was looking for a printer to use for recreational use. Something with decent print quality and longevity as well as something on a reasonable budget. I normally print full pages of color and have been using it regularly for around a year and I have about half of the ink that came with the printer left. Safe to say, the ink lasts a while. The quality may not be the top of the line quality you can get with a more expensive printer, but for the price and just everyday use, the quality is satisfactory. It was easy to set up and walked you through the instructions to connect to devices and configure it. The screen is a little small but if you can overlook that, it really is a nice printer. I have used regular printer paper, card stock, and sticker paper with this printer and I try to load only a few sheets at a time to avoid a jam but I haven't had any issues with it so far. Overall, I am extremely happy with my purchase. It can be extremely difficult to find a decent printer and some reviews can be misleading or leave you with questions on if the product is for you. If you are looking for something for printing everyday with decent quality and ink consumption that won't cost you a fortune, this printer is definitely worth taking a chance on!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
H
Verified Purchase
Heavy G
Chelsea, US
★★★★★ 1
My Epson printer is total junk!
Color: White, Style: ET-2800-W, Pattern Name: Printer
I have had many printers over the years. I started with Canon dot matrix printers, and then ink jet printers. In the old days, and ink cartridge contained all the colors, so if red was out, you tossed away the rest of yellow and blue too. They were pricey and wasting ink wasn't something I was OK with. I would pull ink cartridges from dumpsters outside office supplies stores, take them home and draw the ink from them to fill my cartridges with. Then Epson came up with a cartridge for each color and black . That's when I switched to Epson and have used them ever since. I did have an HP in there when I got such a deal I couldn't pass it by, but after several years it died and I switched to Artisan printers. I still have an old 810 that is finicky and I don't want to have to coax it just to print a few pages. I got a WorkForce printer ,used it several times after I got it, and then it sat idle for 5 years or so. I moved recently and decided to set up the WorkForce printer. The new ink cartridges were practically new, but sat for 5 years maybe, so the nozzles and print head needed cleaning, I expected this. It uses mass amounts of ink to do this so then I was out of ink. I ordered new cartridges, and back to cleaning when they were inside. I never got anything to print, plus, the new paper I ordered was as glossy and slippery as photo paper, and the rollers couldn't grip it. I gave up and ordered this printer as a replacement. Setup went OK until I put paper in, then the rollers were slipping and I got jam messages, even though nothing was inside. I pulled the paper and let it finish the initial process. Then I put paper in when it wanted to align the print head. It fed paper OK for now, so I guess maybe I didn't get hosed on this Epson as I did buying the WorkForce Epson. UPDATE November 1st 2025 This is a frustrating printer!!!! I'm using WIFI network to connect the printer to my laptop computer. I like to be able to print or scan from anywhere in the house. If you purchase this frustrating Epson printer, you now have a ball and chain around your leg. You can't print a simple document without some kind of error code popping up and requiring that go look at the minuscule little screen and try to figure out what button you must press to get the document printed. If I have to be right next to the printer, I might as well use a wired connection. I am disabled and it's a real inconvenience for me to have to go to the printer and squint at the tiny screen to try to figure out why it's been ten minutes of my time and I still haven't gotten my 1 page document in my hand. High speed printing is not high speed when you can't get a printed page without having to make several trips back and forth to the printer. I set the default paper to the standard plain white letter paper, only to find it wants to scan to photo paper, so it just sits there like a block of cement and nothing gets done. I had an Epson Artisan 810 that I really liked, except for the automatic feeder quit working so you had to stand there and feed each sheet to be scanned by hand. I didn't want a sheet feeder on the printer because they break down and the you're feeding by hand anyway. I just hate printing anything at all now because of this printer. I wasted several hours one day trying to print documents that I downloaded and needed a physical copy to present in person for a project I'm doing. Normally I would send a PDF file, and let someone else bother printing if that was necessary. After years of purchasing Epson printers, this is absolutely the last Epson I have spent my money on. Never ever again. The first clue should have been when the quick start guide suggested using a smart phone to set up the printer. I'm not going to work from my 5 x 7 phone screen when I can instead use a 15 inch laptop screen, and keyboard. It's simply a stupid idea. Sorry, but no more Epson for me ever!!!! Update: 4/10/26 This is absolutely the most useless and frustrating Epson printer that I have ever ever owned. I cannot see good close up I need reading glasses to read. The digital screen on this printer is minuscule it's like a postage stamp size absolutely worthless. I have to carry a magnifying glass over to the f****** printer so that I can see what that little miniscule screen has to say on it. The most frustrating thing is every time I want to print something which is rare I don't print things every day the printer is not available is the message I always get I go over there by the printer I turn it off I turn it back on, that should clear out any crap that's on it so it's ready to print right? No you would be dead wrong! Instead you get a stupid little mini School screen and wants to be set on copy mode. I don't want to copy anything I don't want to scan anything I just want the damn thing ready to print. Anyway you come back to your your phone and you want to print and a printer still not available. I literally destroyed my phone I was that pissed off. I'm too old to be frustrated like that all the time. At 75 years of age I have had my share of printers over the years starting with the original dot matrix ones. Absolutely none of them were as difficult to use as this stupid printer I got now from Epson. When you want to print something you should be able to send it to the printer and it should print. You should not require a phone app to set the damn thing up! One thing I'll say, it's pretty good on ink because you can't make the damn thing print when you want it to !!!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 10, 2025
D
Verified Purchase
Diana Crossman
Chelsea, US
★★★★★ 5
Quality Printer
Color: Black, Style: ET-2800-B, Pattern Name: Printer
Wonderful multi purpose printer. I bought this months ago and finally got it set up. Set up was easy. Love that the printer is so light weight and fairly compact that I can move it wherever if needed. The supply of ink that came with it was awesome. The ink goes a long way. I have printed out a lot of photos on this printer and the quality has been very good. I have not encountered any paper jams. The photo printing has not been smudged nor has the color been uneven. From documents to photos this little printer does it all and does it very well. When my work printer dies I will be replacing it w another Epson Eco Tank for sure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
S
Verified Purchase
Scott
Fort Morgan, US
★★★★★ 4
Printing is great, wifi is a problem (I figured out how to make it work!)
Color: White, Style: ET-2800-W, Pattern Name: Printer
I was on the fence about buying this printer because most of the 1 star reviews all said the same thing... "The Wifi would not work" So I followed the instructions, Turned on the print, downloaded the IOS app, connected to the printer via Bluetooth, installed the ink, initialized the printheads. While that was going on, the app asked me to setup the wifi. a List of SSID's came up and I selected the one I wanted. I put in the password and it connected and the icon on the printer turned blue. I have a Unifi setup and I could see that the printer connected to access point #3 @ 2.4ghz and got an ip address. I locked the IP address to the printer. (For my instructions to work for you, you need to make a reservation or lock the ipaddress that your DHCP server provided to the printer. ) If you don't do this, you will get a different address every time you turn the printer on and the computer and app will not be able to find the printer. When the initialization was complete, the app on my phone said it could not connect to the printer. I decided to try to connect to a computer and come back to the phone app. I downloaded the software package from Epson and ran it. When it went to connect to the printer it could not find it and brings up a list of troubleshooting steps that are not likely to do anything. There are videos about this problem and they are all useless. I am an IT professional with 26 years of experience. I am not going to unplug the printer and wait five minutes, I am not going to re-boot my router, I have a Unifi network environment with over 150 devices connected... (I have great wifi coverage, I am not moving my printer anywhere) My network works just fine, this printer is the issue! So at this point, I know that the printer IS connected to my wifi and it got an IP address. This is not a wifi problem as everyone seems to think it is. It is an issue with the Epson software. I decided to try to install it via the windows printer installer. I selected install via TCP/IP and put the ipaddress that my Unifi system provided to the printer. Windows found the printer and since the Epson app had already installed the drivers... just asked me what drivers I wanted to use. The ET-2800 showed up on the right hand side of the screen. I selected it, it installed and I was able to try a test print. It worked fine. I can print from my computer to the printer via the network. Next was the phone app. The phone app has the option to find the printer via the IP address. I put the IP address in and it found the printer. The phone app works now too. So, It took me some time to get this working, it should not have taken any time at all if the software worked correctly. The printer is really nice, it is a shame that the software is so bad when it comes to connecting to the printer. So if you decide to buy one of these printers, save yourself the headache and just install using the ip address, it is quick and easy that way and it just works. I would have just purchased an HP printer, but I did not want to deal with all the issues of their subscription ink service. I feel like the cost of ink makes this printer worth the hassle of getting it to work.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2024
H
Verified Purchase
Hawk R.
Battle Creek, US
★★★★★ 5
Handles Photo-Quality Prints, Versatile Connectivity
Color: Black, Style: ET-2800-B, Pattern Name: Printer, Color: Black, Style: ET-2800-B, Pattern Name: Printer
I've had this printer for a whole year now. I was on a severe budget, looking for a photo-quality printer that didn't require Wifi in this digital age- because I quite frankly can't afford my own Wifi connection. My rink-a-dink laptop had to be set up with the software at my library, and an extra cord purchased. All that said, I mostly print from my phone, because the software app is a bit easier to ensure that I get the highest quality setting. Laptop loves to be a snot about it. The blutooth feature, or "wifi direct", has a way about it, and as soon as you figure out what it wants, it gives minimal problems. It functions exactly as if a printer had wifi on it, believe it or not. What sold me on this model was the ability to do all of that, and adjust for different situations, seeing as other brands DEMAND constant wifi connectivity (lookin' at BROTHER, maybe Canon, too), and the long lasting ink tanks- I've printed hundreds of pages, and being a gothic/horror artist, at least a good part of the time, black is the only color even half gone. What horrified me the most about printer-shoping dropping a lot of money (hundred plus is a lot over here, man) and not getting the prints to look like my work. Well, fear not. The attached pictures are why I made this review, to hopefully ease the anxiety of others. I make digital paintings, and use high DPI for high quality, and also the cutest micro-stickers you've ever seen. Prints come out clear, even if they can sit in the tip of my finger. Yes, there are probably better printers. Maybe they're faster, and have even better connectivity, and have more bells and whistles. I specifically did not want to pay for those things, so, I'm very happy there's options. It's not perfect, no, because every now and then, I get what I call a "special edition", where my printer has decided to multi-color barf out the last third of the page. One time it randomly printed in black and white. Well, that's no big deal, my stuff tends to look great in monochrome. Every now and then I get a low quality print; things just look a bit fuzzy. I'm not happy about that, but, you clean the heads, and print something simple and toony, and it has never done it twice in a row. Alignment has been off only one time, and I put the printer away after every session. It occurs to me that people pay good amounts of money for printers that do that sort of thing anyway, so... Printers gonna printer, no matter where you try to hide. Overall, I'm happy and relieved. I hope it lasts me a good long time. (Streetratt on Kofi, by the way.🖤 )
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026

recommand products

Alliant AP0029 Fuel Filter Base & Hand Primer Seal Kit
45.06
Kente Haven Multi Color Fashion Hand Weaved Kente Cloth KH142
125.00
Mugler Take Me Out Perfume by Thierry Mugler for Women
51.99
Kente Haven New Fashion Hand Weaved Kente Cloth KH146
155.00
Kente Haven Blend Fashion Hand Weaved Kente Cloth KH160
195.00