Bifrost Tracer Unit (Multicolor Flame) - Black

Bifrost Tracer Unit (Multicolor Flame) - BlackThis tracer unit is designed for green tracer BBs. With each shot, the tracer units sensors detect the flying BB and briefly flash to "illuminate" it, making it visible in the dark during flight. It remains visible throughout its entire trajectory and creates a spectacular effect. However, the most interesting feature of the Bifrost is the muzzle flash simulation, especially when firing in multicolor mode. The flash effect looks best when used on gas

This tracer unit is designed for green tracer BBs. With each shot, the tracer unit’s sensors detect the flying BB and briefly flash to "illuminate" it, making it visible in the dark during flight. It remains visible throughout its entire trajectory and creates a spectacular effect.

However, the most interesting feature of the Bifrost is the muzzle flash simulation, especially when firing in multicolor mode. The flash effect looks best when used on gas guns, as the remaining gas ignites after the shot. The flame effect depends on the volume of gas or mist around the muzzle—the greater the volume, the stronger the effect. At the end of the suppressor, there are 3 LED diodes that illuminate the flying BB and the gas (air) around the barrel when firing. The effect is also visible when used on electric guns (AEGs), although slightly weaker. Additionally, with Bifrost you can choose which color and mode to use.

There are 2 illumination modes and a total of 11 flame simulation variants, ranging from single colors to RGB mode, Rainbow, and Dynamic Rainbow.

Features:

• Fully charged battery (Li-Ion) illuminates up to 24,000 BBs (illumination mode only or flame simulation only)
• Battery charging time: 2.5 hours
• The unit is fully functional up to a rate of fire of 35 RPS (rounds per second)
• Designed for green tracer BBs
• Automatic sleep function after 5 minutes of inactivity; simply turn on the unit to reactivate
• Battery status indicator via LED (green / orange / red)
• 14mm CCW thread

Illumination Modes

• STANDARD - every BB is illuminated and flame simulation can be used
• SNIPER - one out of every three BBs is illuminated and flame simulation is disabled to avoid revealing the shooter’s position
• OFF - illumination mode is off and flame simulation can be used

Flame Simulation Modes

• SINGLE COLORS - flame simulation in the selected color (red, orange, yellow, green, blue, pink, purple)
• RGB - flame simulation in RGB colors
• RAINBOW - flame simulation in all colors creating a rainbow effect
• DYNAMIC RAINBOW - flame simulation with dynamically changing colors (color changes every 0.5 seconds)
• DEMO - each simulation mode is active for 5 shots and Dynamic Rainbow for one cycle
• OFF

Battery Life

• Illumination + flame simulation (up to 12,000 BBs per charge)
• Flame simulation only (up to 12,000 BBs per charge)
• Illumination only (up to 24,000 BBs per charge)

Bifrost features intelligent power management: it automatically turns off after 5 minutes of inactivity. Simply shake the suppressor to wake it up. Of course, you can also turn it off completely using the power button.

The tracer unit is housed in an aluminum casing with a matte anodized finish. It is powered by an internal Li-Ion battery that provides up to 24,000 BBs per full charge, or 12,000 BBs in illumination + flame simulation mode. To charge the battery, unscrew the end cap of the suppressor and connect the included USB-C cable. You will also find the power button beneath the end cap.

The suppressor status (power on, battery voltage, self-check result) is indicated by a flashing LED.

The package includes a 14mm CCW to 11mm CW thread adapter, allowing you to use the suppressor on any airsoft replica with a removable muzzle device. An Allen key is also included for easier tightening/loosening of the adapter.