Makita Pneumatic Coil Framing Nailer AN902 3-1/2 Inch Air Powered Gun (120 PSI 6.1 SCFM 15 Degree Wire Collated Sheathing Fencing Woodworking)

High Capacity Air Fastening for Wood Framing and Structural Sheathing

The Makita AN902 3-1/2 Inch Coil Framing Nailer is a pneumatic high-production construction tool engineered to drive 15-degree wire-collated framing nails from 1-3/4 to 3-1/2 inches in length. Operating at air pressures between 70 and 120 PSI, this air-powered nail gun provides the consistent driving power required for continuous subflooring, structural framing, and external roof sheathing. Built with a lightweight body weighing 7.7 pounds, it features a 300-nail capacity canister, a tool-less depth adjustment system, and aggressive nose spurs to optimize rapid sequential or contact-fire field layouts.

Best Used For:

• Structural Home Framing: Joining studs, headers, and rafters securely with high-rigidity wire-collated structural fasteners.
• Wall and Roof Sheathing: Rapidly securing large structural plywood or OSB panels down using a high-capacity 300-nail drum magazine.
• Heavy Pallet Assembly: Fabricating industrial wood pallets, crates, and boundary fencing where continuous high-speed fastening is essential.

Key Performance & Safety Features

• High Capacity Canister: Adjustable drum magazine holds up to 300 nails to reduce reloading intervals during production carpentry tasks.
• Tool-Less Depth Control: Micro-fine adjustment dial enables precise tactile configuration between clean flush seating and deep countersunk driving.
• Aggressive Toe-Nailing Spurs: Pronounced mechanical teeth on the nose piece grip lumber grain tightly for slip-free angled fastening.
• Job Site Reinforcement: Outfitted with an integrated steel exhaust plate and perimeter rubber housing bumpers to prevent tool damage.
• Surface Protection: Removable non-marring nose tip insert shields premium exterior decking and wood surfaces from impact blemishes.

What's Included

• (1) AN902 3-1/2 Inch Coil Framing Nailer
• (1) Pneumatic Nailer Oil (181434-7)
• (1) Safety Goggles (191687-A)
• (1) No-Mar Tip (BA00000372)

Technical Specifications

Pro-Tip: To avoid structural wood splitting when toe-nailing at steep angles, position the nose spurs firmly into the stud grain before triggering the tool, allowing the compressor pressure to drive the nail uniformly along the diagonal plane.