3DXTech CarbonX PETG + CF15 (Carbon Fiber Reinforced) Filament 1.75mm

3DXTech CarbonX PETG + CF15 (Carbon Fiber Reinforced) Filament 1.75mmAre You looking To Buy CarbonX PETG+CF In Australia? CarbonX PETG+CF is made using our high flow PETG and premium high modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish. CarbonX PETG+CF Carbon Fiber Reinforced Co Polyester CarbonX PETG+CF is made in the USA using premium PETG and High Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX

Are You looking To Buy CarbonX™ PETG+CF In Australia?

CarbonX™ PETG+CF is made using our high-flow PETG and premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness, excellent dimensional stability, and an amazing surface finish.

CarbonX™ PETG+CF Carbon Fiber Reinforced Co-Polyester

CarbonX™ PETG+CF is made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX™ PETG+CF is an improved CF reinforced 3D printing filament vs. the competition. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.

Benefits of CarbonX™ PETG+CF Include:

• Superior chemical resistance vs. ABS
• Amorphous structure giving it low, near isotropic shrinkage
• Low moisture absorption, 3x lower than ABS
• Very low odor while printing
• Wide processing range from 230-270°C

TECHNICAL DATA SHEET

Click HERE to open this material's TDS

SAFETY DATA SHEET

Click HERE to open this material's SDS

Chemical Resistance of PETG:

Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.

Filament Specifications:

1.75mm +/- 0.05mm in diameter

Carbon Fiber Reinforced Filament

What Is It?

Fibers 5-10 micrometers wide made of carbon. The fibers are aligned following the axis of the material.This, along with their physical makeup, are what give this material its excellent properties.

What Does It Do?

Carbon Fibers demonstrate a lot of desirable material properties:

• High stiffness
• High tensile strength
• High heat tolerance
• High chemical resistance
• Low weight
• Low thermal expansion

How Does It Work?

Reinforcing plastic with carbon fibers produces a 3D printing filament which exhibits the best properties of both the carbon fibers and the plastic of choice.

What Is It Good For?

Ideal for any applications which require light weight and rigidity.

Carbon fiber reinforced parts, designed to use less material and save weight, is extremely popular in aerospace, civil engineering, the military, and motorsports.

Abrasive Material

This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.

Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal. Hardened steel nozzles can often be inexpensive and easily installed depending on your printer manufacturer's instructions.

Browse All

• Browse All 3DXTech
• Browse All PETG
• Browse All Specialty Filaments