Matek Flight Controller H743-SLIM-V4

Matek Flight Controller H743-SLIM-V4MatekSYS Flight Controller H743 SLIM V4 Features STM32H743VIH6, 480 MHz, 2MB Flash IMU Dual ICM42688P Analogue OSD Baro DPS368 MicroSD slot for datalogging 7x UARTs, 2x 12C, 1x CAN, 1x SPI3 breakout 6x ADC (Vbat, current, VB2, CU2, RSSI, Airspeed) 13x PWM Outputs Specifications FC MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash IMU: Dual ICM42688P Baro: DPS368 OSD: AT7456E (SPI2) Blackbox: MicroSD card socket 7x Uarts (1,2,3,4,6,7,8) with built in

MatekSYS Flight Controller H743-SLIM-V4

Features

• STM32H743VIH6, 480 MHz, 2MB Flash
• IMU Dual ICM42688P
• Analogue OSD
• Baro DPS368
• MicroSD slot for datalogging
• 7x UARTs, 2x 12C, 1x CAN, 1x SPI3 breakout
• 6x ADC (Vbat, current, VB2, CU2, RSSI, Airspeed)
• 13x PWM Outputs

Specifications

• FC 
  • MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
  • IMU: Dual ICM42688P
  • Baro: DPS368
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card socket
  • 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
  • 13x PWM outputs(including “LED” pad)
  • 2x I2C
  • 1x CAN
  • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 1x SPI3 breakout
  • USB Type-C(USB2.0)
  • 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
  • 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
  • Dual Camera Inputs switch
  • 5V 0r Vbat(2A) filtered power ON/OFF switch
  • DJI FPV OSD is supported by any spare UART
• Power
  • Vbat Input: 6~36V (2~8S LiPo) with TVS protection
  • BEC: 5V 2.5A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • VBat filtered output 2A for VTx and camera
  • No Current Sensor built-in
  • ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
  • Static power: 200mA@5V with Betaflight,  150mA@5V with ArduPilot
• FC Firmware
  • ArduPilot: MATEKH743
  • BetaFlight: MATEKH743
  • INAV: MATEKH743
• Physical
  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 36 x 36 x 5 mm
  • Weight: 7g

Includes

• 1x H743-SLIM-V4
• 6x Silicon grommets M4 to M3
• 1x JST-SH1.0_8pin cable, 5cm
• 2x JST-SH1.0_8pin connectors
• 1x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm

Browse More

• Browse all Flight Controllers
• Browse all Matek

BROWSE MORE

• Browse all Flight Controllers
• Browse all Drone Electronics
• Browse all Matek