Pay in installments of $133.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Oct 10 - Oct 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Propshaft Centre Bearing for Renault Duster 4x4 - MAP-101164Vehicle Fitment & Part Details This propshaft centre bearing (MAP 101164) is a driveshaft support bearing with a 207mm length and 30mm inner diameter, listed for the Renault Duster (HS) 4x4 range across the 1. 5 dCi diesel and 1. 6 and 2. 0 petrol variants. OE reference 397740385R is listed for cross checking against your original part. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN
Vehicle Fitment & Part Details
This propshaft centre bearing (MAP-101164) is a driveshaft support bearing with a 207mm length and 30mm inner diameter, listed for the Renault Duster (HS) 4x4 range across the 1.5 dCi diesel and 1.6 and 2.0 petrol variants. OE reference 397740385R is listed for cross-checking against your original part. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- MAP-101164
- Component
- Propshaft Centre Bearing
- Primary Fitment
- Renault Duster (HS) 4x4
- Specs
- Length 207mm, inner diameter 30mm
Listing Highlights
- Propshaft centre bearing listed for the Renault Duster (HS) 4x4 applications shown in the fitment table.
- Cross-referenced to listed Renault OE number 397740385R for compatibility checking before ordering.
- Length 207mm, 30mm inner diameter for matching against the original bearing.
Product Specifications
| Specification | Value |
|---|---|
| Length | 207mm |
| Inner Diameter | 30mm |
Vehicle Fitment
| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| Renault | Duster | HS | 2015-2018 | 1.6 16V 4x4 (H4M 430) | 84kW/114PS |
| Renault | Duster | HS | 2011-2015 | 1.6 16V 4x4 (K4M) | 75kW/102PS |
| Renault | Duster | HS | 2011-2018 | 1.5 dCi 4x4 (K9K 884) | 66kW/90PS |
| Renault | Duster | HS | 2011-2018 | 2.0 4x4 (F4R 403) | 105kW/142PS |
| Renault | Duster | HSMD | 2013-2018 | 1.5 dCi 4x4 (K9K 856) | 80kW/109PS |
| Renault | Duster | HS | 2012-2018 | 2.0 4x4 (F4R 410) | 99kW/135PS |
Fitment Notes
- Listed for the 4x4 (all-wheel-drive) Duster variants only, which use a propshaft to the rear axle. Front-wheel-drive Duster variants do not use this part.
- Always match the OEM reference number and original part before ordering. Verify VIN/engine.
OEM Reference Numbers
- Renault: 397740385R
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, OE reference and original part comparison before ordering.
- Match the length (207mm) and inner diameter (30mm) to your original bearing before ordering.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Fitment must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this propshaft centre bearing fit my vehicle?
This part (MAP-101164) is listed for the Renault Duster (HS) 4x4 fitments shown on this page. Confirm by matching the OE reference and dimensions. Verify VIN/engine.
What OEM part number does this cross-reference?
This bearing cross-references OE 397740385R. Match it to your original part before ordering.
Does this fit the front-wheel-drive Duster?
No. This is a propshaft centre bearing, used only on the 4x4 (all-wheel-drive) Duster. Front-wheel-drive variants have no propshaft. Confirm your vehicle is 4x4 before ordering.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Incredible Quality, Incredible Results!!
AMAZING!! I use my Samsung Z Fold with a Maono Podcast Soundboard for podcasting. Having the phone charge from the soundboard power passthrough was inadequate to keep the phone charged, and generated "noise" in the path.
I got the Anker 565 USB-C hub, and routed the power and signal through the Anker hub. WOW!! My phone remains fully charged throughout the podcast, there is ZERO "noise" in the signal, and I can actually do more than ever expected!
The quality of Anker products has been proven with me Over and Over with every single product I have purchased. From high-end 240w USB-C cords, to Power Banks, Power Blocks, Bluetooth Earbuds & Headphones, across the board; I have never been disappointed!
I highly recommend Anker, and specifically the Anker 565 USB-C hub!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2025
★★★★★ 5
Versatile with all the ports you’re looking for.
Compact and really expands your options. I was using one of the ports on the MacBook Pro M1 for a second display and the other for an external drive and then switching back and forth with the charger. This device does all that and only uses one of the ports. Plus there are multiple USB OLD STYLE still available. No external power appears to be necessary, although since I use the Mac power supply in the dedicated power in port I’d think there’d be no issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
★★★★★ 1
Good product, I suspect, if it works. (Also Marketing Needs Improvement)
UPDATE:
Nope, it's just the hub. :(
It's either defective or not a good product, which is unfortunate.
The stutter issue has been resolved, but I can still not use the dock to push an image to my secondary monitor (1080p).
I spent several hours this evening updating drivers for my Lenovo Thinkpad E15 Gen2 (AMD) without success. FYI: This laptop DOES support PD+DP through USB-C, something I confirmed before trying to go down the USB-C route in an attempt to replace my ancient Diamond USB-A dock.
An image was never sent to my second monitor, whether connected via HDMI or DP through the hub.
In all cases, the monitor IS recognized by Windows, so some information is being communicated, just not an image to the monitor.
During every attempt, when the monitor was first plugged in, responsiveness in Windows would stutter, lag, and generally respond slowly to my KB+M inputs until, eventually, the laptop caught up and was OK.
I am highly disappointed and am considering returning both products, but the USB-C dock is definitely returning.
It would be nice, but I don't need a 100W charger.
My hope of replacing my current USB-A dock is diminishing at the price point I was hoping for, so we shall see if it's up to the task of the new 2K monitor I have on the way and go from there.
Original:
Buyer be cautioned:
The Anker 565 USB-C also needs power for itself, which is evident if you think about it, but it's not stated anywhere that I could find, and it may not dawn on you until things aren't working quite right.
Lack of power could cause many issues I've read about in reviews.
The issue:
Mouse movement would stutter every 5-10 seconds.
Though Windows recognized my HDMI monitor in Device Manager/Display settings, no image was sent to it through the Anker hub.
Current theory:
So, the manufacturer's 65W USB-C charger for my laptop cannot FULLY power the hub with one connected HDMI monitor, two USBs, and Ethernet through the USB-C hub.
I did not test the two USB devices (Keyboard and headset) as there was little need once the stuttering began, which was immediate.
I have an Anker Nano 100W arriving tomorrow, and I will update the review once I've re-tested.
Suggestion:
My ask to Anker would be to *estimate* the power draw of their dock and list it somewhere with many warnings, etc.
If they wanted to go above and beyond and add averages for peripherals and the like, that would be amazing, but if not, I would understand, as I'm sure that information could become dated fast.
A power warning would have prompted me to consider the power charging situation, and I may gone with one of their docks (About a $100 increase) instead. But now that I'm annoyed, I'll purchase a 100W charger that I can use for my work laptop and elsewhere as needed. :)
They are still getting my money, but not as much.
They make amazing products, but small details like this matter to me as a consumer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 26, 2024
★★★★★ 5
Anker 11 in 1 Docking station as a Starter.
This is an entry level addition to a PC. If more ports needed then the 14 in 1 or a powered Hub.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
★★★★★ 5
It’s worth it
They sick with the insurance they cllaim
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
recommand products
3D Wall Clock, Frameless Wall Clock DIY Wall Decoration, Wall Clock Home Decor
80.00
Jesus Cross, Praying Hand With Heart - Christmas & Baptism - For Church or Home
125.00
Everyday Down Vest
108.00
MashaAllah Wall Calligraphy - Islamic Wall Art
125.00
Family Quote Acrylic Wall Decor | Home Wall Art | Gifts For Couples
200.00