SKU: 54497371575

John Deere TRACTORS - LAWN L107 B / S 17HP Starter 14T 593934 693551 LG693551

$41.29 $45.88
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $11.47 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 19 - Sep 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

John Deere TRACTORS - LAWN L107 B / S 17HP Starter 14T 593934 693551 LG693551Starter 14T Fit For B S 14. 5Hp 16Hp 16. 5Hp 17Hp 17. 5Hp 18Hp 18. 5Hp 593934 693551 Features: 1. Brand new starter,not a remanufactured or refurbished one with wear and tear. 2. High quality magnets or field coils deliver more torque for fast starts,good working condition. 3. Inside and out starter motors improve reliability over longer periods of time. 4. Engineered to perform just like the original starter in your vehicle or power equipment 5. New

Starter 14T Fit For B/S 14.5Hp 16Hp 16.5Hp 17Hp 17.5Hp 18Hp 18.5Hp 593934 693551

Features:
1. Brand new starter,not a remanufactured or refurbished one with wear and tear.
2. High-quality magnets or field coils deliver more torque for fast starts,good working condition.
3. Inside and out starter motors improve reliability over longer periods of time.
4. Engineered to perform just like the original starter in your vehicle or power equipment
5. New Armatures are precision-manufactured and tested for long service life.
6. Replaces existing starter motor, Just replace and ride again.
7. Professional installation will be highly recommanded,installation instruction NOT included.

Specifications:
1. Condition: Aftermarket 100% Brand New
2. Fitment Type: Direct Replacement
3. Surface Finish: Heavy Duty
4. Unit Type: Starter
5. Voltage: 12V
6. Number of Teeth: 14
7. Rotation: CCW
8. Starter Type: PMDD
9. Power Source: Gas

Dimensions:
Holes spacing: 58.2mm / 2.29 in
Field Housing Length: 97mm / 3.81 in
Pinion OD: 40.4mm / 1.59 in

Interchange Part Number:
For B/S 593934, 693551,BS693551
For John Deere LG693551, ?MIA13018, SE501848
For Lester 5777
For New Holland BS693551

Fitment:
Fit for Cub Cadet
MOWERS - ZERO TURN RZT17 B / S 17HP Gas 2004
MOWERS - ZERO TURN RZT42 B / S 17.5HP Gas 2005-2006
MOWERS - ZERO TURN Z-Force 42 B / S 18.5HP Gas 2004
TRACTORS - COMPACT 1170 B / S 17HP Gas (Sgl.) 2000-2001
TRACTORS - COMPACT 1170 B / S 17HP Gas (Twin) 2000-2001
TRACTORS - COMPACT 1600 B / S 16.5HP Gas 1999
TRACTORS - COMPACT 1800 B / S 18HP Gas 1999

Fit for John Deere
TRACTORS - LAWN D100 All B / S 17.5HP
TRACTORS - LAWN D105 All B / S 17.5HP
TRACTORS - LAWN D110 All B / S 19HP
TRACTORS - LAWN Europa 1642HS B / S 16HP
TRACTORS - LAWN L100 B / S 17HP
TRACTORS - LAWN L105 B / S 14.5HP
TRACTORS - LAWN L107 B / S 17HP
TRACTORS - LAWN LA100 B / S 18.5HP
TRACTORS - LAWN LA105 B / S 19.5HP
TRACTORS - LAWN LA110 B / S 19.5HP
TRACTORS - LAWN LA115 B / S 19.5HP
TRACTORS - LAWN LA125 B / S 21HP
TRACTORS - LAWN Sabre 14.542GS B / S 14.5HP
TRACTORS - LAWN Sabre 1642HS B / S 16HP
TRACTORS - LAWN Sabre 1742GS B / S 17HP

Fit for New Holland
MOWERS - ZERO Turn MZ14H B / S 14HP
MOWERS - ZERO Turn MZ16H B / S 16HP
MOWERS - ZERO Turn MZ18H B / S 18HP

Fit for Sabo
TRACTORS - LAWN 107-17HS B / S 17HP
TRACTORS - LAWN 108-14.5 B / S 14.5HP
TRACTORS - LAWN 108-17HS B / S 17HP

Fit for Scott
TRACTORS - LAWN L1742 B / S 17HP
TRACTORS - LAWN S1742 B / S 17HP

Fit for Toro
MOWERS - ZERO Turn 14-38Z TimeCutter Z Riding Mower 2003-2004 B / S 14HP
MOWERS - ZERO Turn 16-42Z TimeCutter Z Riding Mower 2003-2004 B / S 16HP
MOWERS - ZERO Turn 17-42Z TimeCutter Z Riding Mower 2003-2004 B / S 17HP
MOWERS - ZERO Turn 18-44Z TimeCutter Z Riding Mower 2003-2004 B / S 18HP
MOWERS - ZERO Turn TimeCutter Z380 Riding Mower 2005-2007 465cc 502cc
MOWERS - ZERO Turn TimeCutter Z420 Riding Mower 2005-2007 465cc 502cc
MOWERS - ZERO Turn TimeCutter Z480 Riding Mower 2005-2006 B / S 18HP
MOWERS - ZERO Turn TimeCutter ZD380 Riding Mower 2006-2008 502cc
MOWERS - ZERO Turn TimeCutter ZD420 Riding Mower 2006-2009 502cc
MOWERS - ZERO Turn Z16-44 TimeCutter Z Riding Mower 2001-2002 B / S 16.5HP
TRACTORS - LAWN MZ14H Riding Mower 2004-2005 B / S 14HP
TRACTORS - LAWN MZ16H Riding Mower 2004-2005 B / S 16HP
TRACTORS - LAWN MZ18H Riding Mower 2004-2005 B / S 18HP
TRACTORS - LAWN Precision Z330 LX Riding Mower 2005-2006 465cc
TRACTORS - LAWN 13-32G Rear Engine Rider 2002-2004 B / S 13HP
TRACTORS - LAWN 13-32H Rear Engine Rider 2002-2004 B / S 13HP
TRACTORS - LAWN 14-32XLE Lawn Tractor 2002-2004 B / S 13HP
TRACTORS - LAWN 14-38HXLE Lawn Tractor 2003-2004 B / S 14HP
TRACTORS - LAWN 16-38 Lawn Tractor 2000-2004 B / S 16HP
TRACTORS - LAWN 17-44 Lawn Tractor 1999-2004 B / S 17HP
TRACTORS - LAWN 170-DH Lawn Tractor 2000-2004 B / S 17.5HP
TRACTORS - LAWN DH 200 Lawn Tractor 2005-2009 465cc
TRACTORS - LAWN DH 210 Lawn Tractor 2005-2009 500cc
TRACTORS - LAWN G132 Rear-Engine Riding Mower 2005-2009 344cc
TRACTORS - LAWN H132 Rear-Engine Riding Mower 2005-2009 344cc
TRACTORS - LAWN XL320 Lawn Tractor 2005-2008 344cc
TRACTORS - LAWN XL380H Lawn Tractor 2005-2010 465cc
TRACTORS - LAWN XL440H Lawn Tractor 2005-2010 502cc

Package includes:
1x New Starter

Note:
1. Compatibility only for reference,please check out the size & part numbers fits your motorcycle or not.
2. This is an aftermarket part, not original part.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 54497371575

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Janeee
Phoenix, US
★★★★★ 5
Fantastic speaker plug at a great price!
Size: 5 Pack, Pattern Name: Banana Plugs
This is a product that gets the job done effectively, and at a good price. Banana plugs are used to clean up speaker wire - you can generally screw in speaker wire, but banana plugs provide a nice interface that allows you to plug in and remove speaker wire as needed. These closed plugs do a good job terminating / hiding the wire. They fit very well into various components and amps that I own. INSTRUCTIONS to install / use them: * Remove around 1" - 2" of the white casing to expose the red and white individual speaker wires * Strip each wire so ~1/2" metal is showing * Make sure the plug end is screwed in tightly (this does not need to come out) * Unscrew the base of the plug from the other end * WithOUT twisting the metal wiring, insert the wire (match wire color with plug color; start with either one) from the bottom of the plug until the metal sticks out the top * Have ~1/4" metal hanging past the plug * take the wiring and drape it down the sides of the plug (just the smooth side, do NOT cover any of the screw threading or it will be very hard to close it) * Spread the draped wiring around the plug as evenly as possible (makes it easier to screw in later) * Screw the two ends of the plug back together (the side with the draped wiring will go inside the plug) * If you get stuck while screwing it back in, unscrew and adjust the wiring * Repeat for the other side, and you're done!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2019
L
Verified Purchase
L. Yu
San Leandro, US
★★★★★ 4
pretty good banana plugs
Size: 5 Pack, Pattern Name: Banana Plugs
i bought these over 6 months ago and i just installed them to the front left and right floor standing speakers - sony ssf-7000 i have them for over 10 years hooked up to a yamaha 7.1 AVR. alot of people have had trouble installing this - one single banana plug comes in 3 parts - the bottom and top (the banana plug tip) can be unscrewed. what i did was tightened the top first (top being the tip of the banana plug) then unscrew the bottom off completely - make sure you have like 3/4" - 1" (depending on your gauge of wire) of exposed speaker wire that is straight - then thread it through the hole at the bottom up - i then rolled the exposed 3/4 - 1" exposed copper wiring into a ball that is bigger than the hole of the banana plug bottom piece so the wire doesn't fall back through where it came from. then i screwed on the top and middle piece back with the bottom piece - tightening it a bit so i know there's good contact. also make sure the tip is screwed in all the way as well as a double check. what you don't want to do is have the copper wire touch the threaded part of the bottom piece - the wire will cut off from the screwing action. i plugged it into my sony speakers and it wasn't a real snug fit - a bit too loose to feel secure - it didn't seem to go all the way in - but it fit fairly well in my receiver. my intention was to use these banana plugs with my 2 channel set up but i decided to go pre-constructed mediabridge 12 AWG speaker cable instead - those fit my 2 channel set up on my receiver and elacs really snug and secure. i tested it and it works fine. i didn't hear any loss of signal or any extraneous noise. none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there. i bought 5 pairs - but i find that it is an odd number to include a package - even numbered pairs would be better. anyway they seem constructed well - easy enough to install and they do work. thanks for reading
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 12, 2019
A
Verified Purchase
AB
Lexington, US
★★★★★ 5
High quality and robust
Size: 12 Pairs, Pattern Name: Banana Plugs
Easily the best plugs I've found at a reasonable price. Solid feeling with good quality and they look good with easy to see red/black labeling. The tips tend to unscrew too easily, but this is a non-issue when they are in use, just something you have to be careful not to lose when assembling. It's a bit tricky to spread the wire out evenly at the exact right length. If screwing the plug together is hard at all, go back and shorten how much wire you bend over the lip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 16, 2025
W
Verified Purchase
William
Fort Morgan, US
★★★★★ 5
Solid banana clips
Size: 5 Pack, Pattern Name: Banana Plugs
Ah yes, I used these solid banana plugs to convert my wires. It’s pretty easy to set up once the wire housing has been stripped and really cleans things up nicely. I haven’t had any discernable hissing, noise problems, or connection issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
L
Verified Purchase
Leyland Cypress
Los Angeles, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012

recommand products

Abus Mechanical 55/40mm Brass Padlocks Twin Pack
25.99
Abus Mechanical 65/60mm Brass Padlock Carded
27.99
Abus Mechanical T84MB/40mm Blue Rustproof Padlock
19.99
VL Lexi Bracelet Set
24.99
Abus Mechanical 70IB/45mm Aqua Safe Brass Padlock Keyed Alike 6404
25.99