Associated ESS6008MSK Intellamatic 12V 60A Wheel Charger with 70A Power Supply Mode

Associated ESS6008MSK Intellamatic 12V 60A Wheel Charger with 70A Power Supply ModeAssociated ESS6008MSK Intellamatic 12V 270 60A Wheel Charger with 70A Power Supply Mode Associated ESS6008MSK is a 12V, 60 70A Intellamatic Wheel Charger with 270 Amp Crank Assist and 70A Power Supply Mode. It has a 15A Memory Saver Output Port, and includes a 12 ft memory saver cable that plugs into the vehicle ODB II port. It also includes terminal covers to prevent the positive cable from arcing while power is being supplied through the ODB II

Associated ESS6008MSK Intellamatic 12V 270/60A Wheel Charger with 70A Power Supply Mode

Associated ESS6008MSK is a 12V, 60/70A Intellamatic Wheel Charger with 270 Amp Crank Assist and 70A Power Supply Mode. It has a 15A Memory Saver Output Port, and includes a 12 ft memory saver cable that plugs into the vehicle ODB-II port. It also includes terminal covers - to prevent the positive cable from arcing while power is being supplied through the ODB-II port. The ESS6008MSK is designed for Standard Automotive, Deep Cyle, AGM And Gel Batteries. The charger is equipped with a Dead Battery Override Control, which eliminates the need to pre-charge batteries. Includes 12’ Memory Saver Cable and Terminal Covers.

- Electrical Stability System (ESS) technology turns ESS6008MSK into a 70A stable power supply for extended service procedures or re-flashes. Nominal 13.7V DC Output
- Memory Saver Mode 15A Continuous/20A Peak
- Program for deep discharge recovery of flooded batteries
- Patented diagnostics indicate weak or defective battery
- Charges all types of 12 volt batteries
- Designed for AGM, Gel Cell, Sealed, and Standard Flooded batteries including Spiral cell, Orbital, or Optima Batteries
- Dead Battery Override Control
- 5 Amp 12’ Straight Cable with OBDII Connector – Male Cigarette Plug
- CC6212 Terminal Covers to prevent positive battery clamp from arcing (pair)
- “Safe In Any Weather” Operation
- MADE IN USA

Specifications

Model Number: ESS6008MSK
AC Requirement: 120VAC 60 Hz
AC Cord: 6’, 16-3
DC Output: 12 Volt
DC Output: 60 Amps /70 Amps in Power Supply Mode, 15Amp Continuous/20 Amp Peak Memory Saver Port
DC Leads: 6.5', 4AWG
DC Clamp Rating: 400 Amp
Battery Types: 12 Volt Flooded, AGM, and Gel Cell batteries - including Spiral Cell, Orbital, or Optima batteries
Display: Analog Meter and 3 LED display indicating charge status
Shipping Dimensions: 17” x 16” x 30”
Weight: 50 lbs
Limited Warranty: 3 Years

Information Downloads

Operator Manual

Product Bulletin

Re-flashing Guide

Quick Start Guide