Pay in installments of $60.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 24 - Sep 29
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
K&N Performance Air Intake System (69-7060TS)The K&N 69 7060TS Typhoon cold air intake system is a free flowing, mandrel bent aluminum tube air induction system designed to fit some Nissan Altima models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of
The K&N 69-7060TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan Altima models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The cold-air intake system accommodates the factory mass air sensor and transmission vent hose. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, a ratchet set and two Allen wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Free-flowing aluminum tubes
- Easy to install, usually in 90 minutes or less
- Filter lasts up to 100,000 miles before service is required
- Replaces entire factory air intake system
- Washable and reusable lifetime air filter
- K&N Million Mile Limited Warranty
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Great for the price
Size: 1 Kit, Size: 1 Kit
Worked great at clearing my headlights and at a great price, I had used a different headlight kit maybe 5-6 months before and it did not perform as good as this kit did, maybe it was a user error with the previous kit but this one cleared it easily and was very easy to do and had a nice clear shine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
★★★★★ 5
Good stuff!
Size: 1 Kit
Good product, made a big difference. Easy to apply, Will buy again when needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
★★★★★ 4
I'm Not Disappointed ...
Size: 1 Kit, Size: 1 Kit
I knew going in that my expectations shouldn't be very high because my car is a first generation 2010 Kia Soul. So its old with 16 plus years of yellowing oxidation and some abrasion. I took a chance with doing this because of the reviews and pictures. To my surprise, it worked better than I anticipated and could hope for. My driver side(left) headlight was horrible but my passenger side(right) wasn't too shabby and didn't require as much care. This would have turned out better if I had power drill attachments of the same sanding grit to do this. My arm is going to be really sore come Sunday. 😆 It wasn't too hard to follow the instructions as they were very simple for the application process. I don't know about the 2 years for it lasting, but for now, its durable. Once I drive at night, I'll be able to
But all in all, it worked for me and its better than before I tackled it. All in all it looks good, I feel like I'll have a better beam when night 🌙 driving.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
★★★★★ 5
Works great. Definitely a good buy and value.
Size: 1 Kit
This was easy to use and made a world of difference on the lenses.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Let this restoration kit light up your life
Size: 1 Kit
I have a car that is 24 years old and is my daily driver. Understandably, the headlight lenses have deteriorated to the point where I was using my brights exclusively at night yet never being flashed to turn them down. I got quotes between 60-80 dollars per headlight for restoration which I just wasn't willing to pay so I decided on this kit to try restoring them myself. I read reviews before I ever make a decision on a product and noticed many reviewers of other products stated that this product works better so I went ahead and purchased it. Man, am I glad I did!!!
The kit arrived late this afternoon, I opened it, READ AND FOLLOWED THE INSTRUCTIONS and within 1 1/2 hours had turned a travesty into a triumph. I started by taping around both lights with 1 inch blue painters tape to protect the paint around the lights. The kit comes with everything necessary to remove most moderate deterioration but be sure to purchase one that corresponds with your actual situation. I believe my lenses were far beyond "moderate" but with some heavy elbow grease, the correct use of both supplied sanding disks and my hose set on "mist" I was able to sand off years of damage leaving behind a smooth, albeit opaque surface. After making sure everything was totally dry using both towels and my leaf blower, I was ready for the Magic!!! I opened the first clearcoat package (while wearing the provided glove) and lightly but steadily applied the liquid with the supplied towelette and the required 50% overlapping passes. The opaque lenses instantly turned clear upon contact with the clearcoat. After waiting around 25 minutes to be sure the lenses were completely dry I opened the second package of clearcoat and applied it in the same manner as the first. I had no misses or problems with my first coat but for those who do...NOW is the time to make corrections, NOT during the first coat process. Leave things to dry for around an hour and you are done.
The end result? AWESOME, INCREDIBLE, UNBELIEVABLE...shall I go on??? Not necessary, but I can say I am thrilled with the outcome. My wife said the lights look new and I agree, there is a night and day difference between before and after.
Only time will tell how long the restoration lasts but for now I am very very happy with the results I got from this 3M product. I highly recommend it to anybody who can read, understand and follow the instructions. 5 stars all the way on this one!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 24, 2025
recommand products
Penguin & House Vol.3
10.99
10Pcs Metric 1.5mm-8mm S2 Alloy Steel Magnetic Hex Screwdriver Bits Set, Length: 50mm
81.55
BEST BST-1041 Multifunctional Decrustation Pliers Wire Cable Stripper Steel Wire Stripping Pliers
80.86
2 Flute 25mm HSS Hex Shank PPR Pipe Reamer Drill Bit Step Drill Hole Opener for Water Pipe Expansion
44.16
OEM Motherboard Connector Flex Cable Replace Part for Huawei MediaPad M3 Lite 10
55.88