SKU: 59465329965

Santani Rainbow Fish Chilatherina Sentaniensis 5cm

Sale price$18.00 Regular price$20.00
Save 10%

Pay in installments of $5.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 25 - Jul 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Santani Rainbow Fish Chilatherina Sentaniensis 5cmSantani Rainbow Fish Chilatherina Sentaniensis Species Summary Chilatherina sentaniensis was originally described as Rhombatractus sentaniensis by Weber in 1907 and assigned to the genus Chilatherina by Regan in 1914. Perhaps the most distinguishing feature of the Chilatherina genus is their deep, laterally compressed body that increases with age, particularly in males, and Chilatherina sentaniensis is no different. Their overall body colouration is

Santani Rainbow Fish Chilatherina Sentaniensis

Species Summary
Chilatherina sentaniensis was originally described as Rhombatractus sentaniensis by Weber in 1907 and assigned to the genus Chilatherina by Regan in 1914. Perhaps the most distinguishing feature of the Chilatherina genus is their deep, laterally compressed body that increases with age, particularly in males, and Chilatherina sentaniensis is no different. Their overall body colouration is silvery-blue or greenish on the upper back fading laterally to orange or red. They have a diffuse blue or green mid-lateral band and narrow silver or light blue stripes between each horizontal scale rows. Males often show 6-8 reddish-brown bars on the lower sides of the body between the pectoral fin base and the level of the middle anal rays. However, colour can be variable depending on captive conditions. Males are more brightly coloured, larger, and deeper bodied than females. Males may reach a maximum size of 12 cm, but females are usually less than 10 cm.

Distribution & Habitat
Chilatherina sentaniensis are endemic to Lake Sentani and its tributaries streams. Lake Sentani is located some 10 kilometres west of Jayapura at the NE extremity of West Papua. It is an irregularly shaped lake with approximate dimensions of 28 km (E-W) by 19 km (N-S) and a surface area of 104 km¬≤. Its blue-green waters are dotted with at least 16 small islands, and it is surrounded by hillsides in the south and the Cyclops Mountains in the north, which separate the lake from the Pacific Ocean. Lake Sentani is by far the largest of the West Papuan lakes and has a catchment area of about 600 km¬≤. About 35 small rivers flow into the lake, and there is one natural outlet in the south-eastern tip, via the Jafuri and Tami rivers to the Pacific Ocean near the Papua New Guinea border. The lake is divided into three main sections with recorded depths of 7 to 52 metres. According to surveys in 1970-71, 1984 and 1987 the lake is thermally unstratified, with surface temperatures of 29-32°C and pH 6.2-6.8.

Unfortunately, because of its proximity to the provincial capital Jayapura and the large population around it, Sentani is no longer the pristine lake it once was. Human activities surrounding the lake have led to noticeable deforestation around it, water pollution, and the introduction of exotic species. A survey by Samuel J. Renyaan in 1993 recorded 33 species of fish, of which 13 were introduced.

More recent surveys have shown an increase in introduced species but the impact on the total fish population has not been documented. A study on water pollution levels in Lake Sentani in 2000 found that the major sources of pollution were human settlements, livestock, and the traditional market. Other pollution sources included outboard motors, chemicals from washing, and some small-scale organic materials from the settlements surrounding the lake. These pollutants have decreased Lake Sentani water quality and resulted in the water not being suitable for drinking without proper treatment.

Chilatherina sentaniensis is listed as a threatened species according to the IUCN Red List because of habitat degradation and the introduction of exotic species into Lake Sentani. The species was reported to occur only in Lake Sentani and its tributaries. Chilatherina sentaniensis were found in one of the tributaries of Lake Sentani (Jembatan II Creek), around 12 km southwest of Jayapura until approximately the early-2000s, when the habitat became polluted as a result of small-scale gold mining in its headwaters. Then in 2006, they were found in another tributary (Mekaye Creek) around 14 km east of Jayapura. However, in more recent times, surveys have failed to find the species in these locations. It is likely that habitat degradation is the cause. It was therefore believed that Chilatherina sentaniensis may be extinct in Lake Sentani (Ohee 2013). Nevertheless, more recent surveys at 38 sampling sites around the shores of Lake Sentani, and the river systems in the vicinity of the Cyclops Mountains, found what is thought to be Chilatherina sentaniensis at 15 locations within Lake Sentani and its tributaries. In addition to finding Chilatherina sentaniensis, the survey also recorded new records for Melanotaenia affinis in the river systems in the vicinity of the Cyclops Mountains (Kadarusman et al., 2016).

Remarks
Chilatherina sentaniensis was originally collected from Lake Sentani and the Sekanto River during the 1899-1900 Siboga Expedition to the Dutch East Indies (West Papua). The Sekanto River is a tributary of the Tami River. They were also collected during the expedition of the British Ornithologists' Union expedition to New Guinea in 1909-1911. A large collection of specimens were also obtained from Lake Sentani by Marinus Boeseman during a collecting expedition for the Leiden Museum in 1954-1955. The lectotype of Chilatherina sentaniensis, preserved in the Amsterdam museum, shows a very long snout, which according to Gerald Allen, is an important distinguishing mark. In his 1982 book, "Rainbowfishes of Australia and New Guinea" Allen showed Chilatherina sentaniensis among the colour sketches, because he didn't have any photographs of live specimens.

In 1982, live specimens of Chilatherina fasciata were collected from the Jafuri River and during the 1980s and early 1990s they were being distributed in the hobby as Chilatherina sentaniensis. In his "Field Guide to the Freshwater Fishes of New Guinea" of 1991 Gerald Allen noted that probably all records of C.

sentaniensis in the aquarium literature were C. fasciata varieties and that the most recent collection of the true Chilatherina sentaniensis was made in 1954. In yet another book, "Rainbowfishes in Nature and in the Aquarium", published in 1995, Gerald Allen shows a picture of a live specimen, with the remarkably long snout, that was collected in a small tributary stream flowing into the north-eastern end of Lake Sentani in 1991. Several specimens were netted along with Chilatherina fasciata and Glossolepis incisus. None of these specimens however, were collected live for the aquarium hobby. Nonetheless, live specimens were collected from the lake in 1991 by Charles Nishihira and distributed in the aquarium hobby.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59465329965

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
G
GL
Lowell, US
★★★★★ 1
Great looking color scheme, but the same flaws as the other color variants of this model.
This review is for the 43mm white dial variant with blue ceramic bezel. Everything is built exactly the same as the black and blue variants other than the colors. I’ve already reviewed the black variant separately but updated the review for this white dial version. Like probably 99% of watch enthusiasts, most of my watches have black or blue dials. Those are the most common/popular dial colors for a reason, they look good and they’re the most versatile. But because I already have so many of those, I find myself always on the lookout for a good looking white dial to add to the collection for a little variety. And even more than just a white dial, I really love a red, white, and blue color scheme. I’m a patriot, proud to have served, and to rep our country’s colors anytime I can. It makes it even better that this watch is made by Hamilton, a brand with a rich US military history that has retained its American name, even if it’s no longer an American company and is now Swiss made and headquartered. But out of all the different watches I’ve bought over the years, Hamilton has been the most frustrating. While it has made great strides in the last few years improving a lot of the things watch enthusiasts care about, such as higher end materials, improved designs, much better lume - there seems to always be at least one cheaply made part that disappoints. Pros: Great looking watch overall, it’s already hard enough to find a good looking white dial watch, let alone one with a red, white, and blue color scheme. 300m water resist (screw down caseback and crown). Accurate and reliable automatic movement. 80 hr power reserve with antimagnetic Nivachron hairspring. Thin for such a large and heavy watch with 300m water resist. Very good lume. Bracelet uses pins and collars for sizing, which is much more durable than cotter pins or screws. I never worry about a pin and collar system coming loose on a bracelet. A lot of bracelets on watches in this price tier, and some even higher (I’m talking to you, Mido and Longines!!!) are held together with cheap cotter/split pins. Cons: No date. The only people who prefer no date are watch collectors, and this is not a collector’s watch. For people who actually wear their watches daily, having the date or day/date is always preferable. Bracelet is old fashioned and needs to be modernized. No quick release spring bars, and no on the fly adjusting clasp. Pins and collars can be a little harder for some people to size, although I have no problems sizing and actually prefer them. Powermatic 80 based movement can be more difficult for traditional watchmakers to service/regulate. On the heavier side, but I’m used to even heavier watches, so it doesn’t bother me. EXTREMELY CHEAPLY MADE LITTLE LUME PIP ON THE BEZEL THAT BREAKS OFF EASILY!!! My measurements: Weight, head only: 99g. Weight, full bracelet: 116g. Weight total: 215g. 43.8mm case diameter. 47.1mm including crown. 43.0mm at bezel. 33mm approximate dial diameter without bezel. 22.0mm lug width. Bracelet tapers to 20mm at the clasp. 52.0mm lug to lug. 12.8mm thick. 7.5mm diameter crown. My wrist is 7.375” and 60mm across for reference in the pics. I’ve had the watch for a few years now. The look/styling of the watch is great. It has some classic Hamilton military looks due to the 24 hour Arabic numerals, the kind of matte, textured white dial (more on that in a bit), and mostly brushed finishing on the case and bracelet, while retaining some polished bits for styling versatility. But this white version is definitely not as versatile as the black one. On the black one, the only pop of color is on the red tipped seconds hand. That one (depending on the strap you put on it) would look equally at home for military use on a rubber or nato, a T-shirt and jeans with any strap or bracelet, and even with a suit when paired with a dressier strap. This one has that same red tip on the seconds hand, but with its white dial, bright blue bezel, along with the polished, bright blue indices and handset - it looks much less serious. I think it would look fine with a T-shirt and jeans and up to business casual, but not much otherwise. Regarding the dial, it’s much more interesting in person than you can tell in the pics. Nicely polished/finished blue indices and handset that turn an almost electric blue when hit by the light, but it’s the texture of the dial that I really like. I have no idea what it’s made of. The texture doesn’t look like it’s just from some kind of paint, it has a very subtle metallic sheen, almost like a very faint glitter. Maybe the best way to describe it would be if you were to take a shiny white metal and then sand it down to give it a matte finish, but you could still see hints of a glittery shine - that’s what it looks like. Visibility is great too. In particular, I find white dial watches that use dark outlines for the hands and indices are the most clearly visible at a glance. Also, dive watches (or any watch with an outer rotating bezel) need to be larger like this one because those bezels take up a lot of the diameter. The lume is much stronger and longer lasting than on previous iterations. This one uses blue lume instead of the green on the black version, and seems to be almost as strong and long lasting, although the green always looks brighter to me in the dark. This lume is still visible on camera even at the two hour mark (and the camera has a much harder time picking up dim light than our eyes can when adjusted to the dark), which means it’ll be easily visible in the dark all night. The antireflective (AR) coating is improved from older models and helps reduce some glare, but there are some angles you’ll find it difficult to see the time. Out of those two, the lume is definitely more important in everyday life. A good AR coating is a bonus, but less of a priority, especially at this price tier. The movement is also great, again especially at this tier. The Powermatic 80 movement is always reliable. 80 hr power reserve, laser regulated at the factory. I have 3 of them in various watches, all of them run easily within the COSC spec of -4 to +6 seconds per day. For this one in particular when fully wound, on the timegrapher it settled down at +2 seconds per day dial up, then +6 spd crown left (12 o’clock down). Its lifetime average has been +1.3 spd over 120 non consecutive days (a week or two at a time) that I actively tracked when on winder or on wrist around the house. The bracelet is a weak point. No on the fly adjust capability and no quick release spring bars. I never even wore the watch on the factory bracelet because of all that, I swapped it out immediately. I can’t wear a watch bracelet that doesn’t have the on the fly adjust capability anymore. Once you’ve had it on other watches, you can’t go back. The glossy ceramic bezel looks good and will be very durable and scratch resistant compared to aluminum. The gloss goes well with the polished bits on the dial, knurling, bezel, and crown. It has 60 minute clicks (which I prefer, makes it much easier to use the bezel even for simple things like counting instead of timing) with a solid feeling, notchy action. It was extremely difficult to move the bezel when I first got the watch because it was very stiff, but also because it has shallow knurling, and it’s smooth and polished, so it lacks grip. It’s extra hard to turn when hands are slippery from water, and almost impossible when from soap or oil. The bezel action did eventually loosen up over time (in the beginning I used to just sit there and constantly rotate the bezel to loosen it up while watching tv), and now it’s much easier to turn. But the bezel and crown knurling could definitely be improved for better grip. But the worst part, and the reason why I’m so dissatisfied with this watch - the lume pip is a little unprotected bead that seems to be just glued into the bezel. On the black version, very early on, after only a few times of wearing the watch - that lume pip broke off, and I didn’t notice until later because I hadn’t banged the watch against anything that would’ve made me check to make sure it wasn’t damaged. I never even noticed before whether lume pips were protected until my experience with that watch. Now I always make sure they’re shielded before I buy. I hate having a watch knowing a piece is missing, even if I’m the only one who knows. I bought this white version right after the black one, but before the lume pip on the black one broke off - so I’ve never worn the white version outside the house because I want to keep it intact. I should just get over it and enjoy the watch for what it is, and let the lume pip break off on this one too. It is such a waste not to wear such a good looking watch. It’s something I’ve always noticed about Hamilton watches - there always seems to be at least one part that’s made cheaply and not as durable as the rest of the watch. There’s a very simple way to fix that problem - either make it with a fully protected lume pip, or get rid of the lume pip altogether and make the bezel bidirectional, since without the lume pip it wouldn’t meet diver requirements anymore anyway. That would change the watch from a diver to more of a pilot watch, but let’s face it - 99.99% of people aren’t diving with these, we buy divers for their water resistance/durability but don’t need a unidirectional bezel for diving purposes. Bidirectional is much more functional for timing things in everyday life. And the best type of bezel would be a bidirectional, 60 click, 12 hour bezel with full minute markings. Then you could not only use it for timing, but also to track a second time zone. That would be a total homerun. In addition to that, add better knurling on the bezel and crown for better grip, quick release spring bars for the bracelet along with an on the fly adjusting clasp, at least a date (or better yet a day/date), then it would be a 5/5. Those should not be expensive additions either, they’re all very simple and relatively cheap modifications. All of that would take this watch to its highest potential in its price tier. Since product quality is always relative to its price, if the lume pip issue were fixed, without any other changes, it would be a 4 - good, not yet great. But because this has such a cheaply made piece that breaks off so easily, it gets dropped to a 1. That’s inexcusable on anything in the $1k+ tier. A lot of watches at even the sub $500 tier have shielded lume pips so that they won’t break off.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 14, 2025
A
Verified Purchase
Al
Massapequa, US
★★★★★ 5
Great quality shirt.
Size: XX-Large, Color: Butter
Nice quality and fits great, very comfortable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
M
Verified Purchase
Michael Bliss
San Leandro, US
★★★★★ 5
Fits great.
Size: Large, Color: Dark Heather
Very good quality. Fits (large) , 6’-1, 187 pds at an excellent price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
B
Verified Purchase
Bill Jessell
Bozeman, US
★★★★★ 5
Costa Black Tee.
Size: Large, Color: Black
Perfect Fit, even after Washing. Thanks for a Great Tee.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
T
Verified Purchase
Todd
Dallas, US
★★★★★ 5
5 star
Size: XX-Large, Color: Butter
Great product with great cost
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026

recommand products