Pay in installments of $177.11 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 17 - Sep 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ICON K2213 Stage 3 Ultimate Front End KitThe ICON K2213 Stage 3 Ultimate Front End Kit is designed to improve the handling characteristics and overall drivability of your 2018 2023 Jeep Wrangler JL or 2020 2023 Jeep Gladiator JT. The ICON Vehicle Dynamics Ultimate Front End Kits aim to enhance steering feel, vehicle control, and overall drivability. These kits replace and upgrade essential worn OE components. In collaboration with Dynatrac, ICON offers a comprehensive front end suspension
The ICON K2213 Stage 3 Ultimate Front End Kit is designed to improve the handling characteristics and overall drivability of your 2018-2023 Jeep Wrangler JL or 2020-2023 Jeep Gladiator JT. The ICON Vehicle Dynamics Ultimate Front End Kits aim to enhance steering feel, vehicle control, and overall drivability. These kits replace and upgrade essential worn OE components. In collaboration with Dynatrac, ICON offers a comprehensive front-end suspension solution. This solution includes Dynatrac HD BallJoints. It addresses common steering issues such as loose steering feel, decreased stability, erratic tracking, uneven tire wear, and the risk of death wobble. It features the ICON adjustable front track bar. The front track bar is an effective solution for ensuring that the Jeep's axle is properly centered beneath the vehicle.
ICON's Double Adjuster permits on-vehicle adjustment. This facilitates a streamlined front-end alignment following installation. The kit includes a maintenance-free, multi-durometer bushing, combined with a 3/4" rod end bearing. This design significantly minimizes deflection commonly found in stock track bar bushings. The increased rigidity enhances vehicle handling and helps to prevent potential front-end wobble caused by more compliant bushing materials. Furthermore, these joints promote overall articulation by allowing the suspension to cycle fully without binding.
The Stage 3 kit includes the ICON Centerline Steering Stabilizer. This component dampens steering inputs and eliminates steering wobble. It is engineered for consistent damping with a through-shaft design. This design avoids the common push/pull sensation found in traditional steering stabilizers. The stabilizer is developed to accommodate a wide range of aftermarket Jeep components. It features a high clearance design, allowing for fitment on all ICON suspension systems. The Centerline Steering Stabilizer shares the same high-quality build features as the ICON 2.0 Aluminum Series shocks.
These features include a clear anodized 6063 aluminum shock body for corrosion resistance. It also includes a 5/8" chrome plated hardened steel shaft for durability. Premium 5WT shock oil is utilized, providing consistent damping characteristics across a wide operating temperature range. Furthermore, it has a high-temperature, long-wear seal pack that withstands harsh conditions both on and off-road. The stabilizer mounts with CNC machined billet aluminum 1-3/8" tie rod clamps, with 1-5/8" clamps available. The rod end is equipped with FK spherical bearings for precise and reliable operation.
This Stage 3 kit includes a complete set of front upper and lower Dynatrac HD BallJoints. These ball joints feature heat-treated, high-strength billet bodies with chromoly stems. Additionally, they are equipped with heat-treated, precision-ground stainless-steel balls. Unique seals are designed to prevent contamination. The ball joints also include greaseable fittings and PTFE-coated wear points, ensuring a long and durable service life.
Moreover, these high-end ball joints utilize an exclusive snap-ring safety feature. This design prevents the ball joint bodies from shifting in the axle housing under the heavy weight of large tires in extreme terrain. A Dynatrac installation kit is included, facilitating a straightforward installation process. It is worth noting that OEM ball joints often wear quickly when subjected to larger off-road tires, extensive road mileage, or extreme off-roading conditions. As a result, replacing worn factory ball joints with Dynatrac HD BallJoints, specifically engineered for the rigorous demands of these vehicles, offers a long-term solution. This replacement helps maximize the overall drivability of the Jeep Wrangler and Jeep Gladiator.
ICON's Double Adjuster permits on-vehicle adjustment. This facilitates a streamlined front-end alignment following installation. The kit includes a maintenance-free, multi-durometer bushing, combined with a 3/4" rod end bearing. This design significantly minimizes deflection commonly found in stock track bar bushings. The increased rigidity enhances vehicle handling and helps to prevent potential front-end wobble caused by more compliant bushing materials. Furthermore, these joints promote overall articulation by allowing the suspension to cycle fully without binding.
The Stage 3 kit includes the ICON Centerline Steering Stabilizer. This component dampens steering inputs and eliminates steering wobble. It is engineered for consistent damping with a through-shaft design. This design avoids the common push/pull sensation found in traditional steering stabilizers. The stabilizer is developed to accommodate a wide range of aftermarket Jeep components. It features a high clearance design, allowing for fitment on all ICON suspension systems. The Centerline Steering Stabilizer shares the same high-quality build features as the ICON 2.0 Aluminum Series shocks.
These features include a clear anodized 6063 aluminum shock body for corrosion resistance. It also includes a 5/8" chrome plated hardened steel shaft for durability. Premium 5WT shock oil is utilized, providing consistent damping characteristics across a wide operating temperature range. Furthermore, it has a high-temperature, long-wear seal pack that withstands harsh conditions both on and off-road. The stabilizer mounts with CNC machined billet aluminum 1-3/8" tie rod clamps, with 1-5/8" clamps available. The rod end is equipped with FK spherical bearings for precise and reliable operation.
This Stage 3 kit includes a complete set of front upper and lower Dynatrac HD BallJoints. These ball joints feature heat-treated, high-strength billet bodies with chromoly stems. Additionally, they are equipped with heat-treated, precision-ground stainless-steel balls. Unique seals are designed to prevent contamination. The ball joints also include greaseable fittings and PTFE-coated wear points, ensuring a long and durable service life.
Moreover, these high-end ball joints utilize an exclusive snap-ring safety feature. This design prevents the ball joint bodies from shifting in the axle housing under the heavy weight of large tires in extreme terrain. A Dynatrac installation kit is included, facilitating a straightforward installation process. It is worth noting that OEM ball joints often wear quickly when subjected to larger off-road tires, extensive road mileage, or extreme off-roading conditions. As a result, replacing worn factory ball joints with Dynatrac HD BallJoints, specifically engineered for the rigorous demands of these vehicles, offers a long-term solution. This replacement helps maximize the overall drivability of the Jeep Wrangler and Jeep Gladiator.
Features:
- On-Vehicle Rebuildable Ball Joint Design
- Improves Steering Feel & Vehicle Control
- Increased Steering Damping Over Stock Unit
- 5/8" Chrome Plated Hardened Steel Shock Shafts
- Heat-Treated, Precision-Ground Stainless-Steel Ball
- CNC Machined, High-Strength Ball Joint Components
- Provides Symmetrical Steering Feel Throughout Input Range
- Full Set Of Genuine Dynatrac Front Upper & Lower Ball Joints
- FK Rod End Bearings In Steering Stabilizer For Precise Function
- Snap Ring Prevents Unwanted Ball Joint Movement In Axle Housing
- Heat-Treated, High-Strength Billet Ball Joint Bodies With Chromoly Stems
- Centerline Steering Stabilizer Is A Fully Serviceable ICON 2.0 Aluminum Series Shock
- 5WT Shock Oil For Consistent Suspension Damping Along A Wide Temperature Range
- On Vehicle Adjustable Track Bar For Precise Track Alignment Using ICON's Double Adjuster
- Sealed, Greaseable Ball Joint Design With PTFE Coated Wear Points Ensure Long Service Life
- Track Bar Constructed With CNC Machined And Bent 1 1/4" X .250 Wall 1026 Seamless DOM Tubing
- 6063 Clear Anodized Aluminum Shock Body Provides Excellent Corrosion Resistance & Superb Heat Dissipation
- Through Shaft Steering Stabilizer Design Eliminates The Push/Pull Sensation Associated With Traditional Stabilizers
- Maintenance Free, Multi-Durometer Bushing & JM12T Rod End Minimize Track Bar Deflection While Maximizing Responsiveness
Note:
Not compatible with Unlimited Rubicon 392.
Fits Jeep Wrangler JL and Jeep Gladiator equipped with OE or Dynatrac ProRock 44 front axles.
If using a heavy duty 1-5/8" aftermarket tie rod, Icon 614525 Universal Tube Clamp Kit (1-5/8") must be used (See Related Items).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 5
My Matcha Frother
Color: Silver, Color: Silver
I recently started making matcha tea at home and opted for a milk frother instead of the bamboo hand whisk that is traditionally used for matcha, due to health issues. I have a connective tissue disorder and early osteoarthritis and need to protect my wrists, so the hand whisk would be risky for my daily matcha habit. The Vomelon frother is perfect for mixing up my matcha tea powder into my water or almond milk while saving my joints from further damage.
I liked the included cover for this model, and the large on/off button on the top of the device. Other models have their switches and buttons placed in odd places that could be awkward for me. I have trouble pushing this device's button with my thumb, even though it seems designed to be done this way, so I typically use my index finger to switch it on and off. This works well for me. You don't have to hold the button while it's on - it stays on until you turn it off - so that helps.
The two coil attachments are nice, too. The single coil one does a decent job, but the triple coil really blends up well, and froths up my almond milk into a airy, frothy cup rather quickly, if that's what I'm going for.
It uses 3 AAA batteries, and I worried they would get used up with daily use, but I have been using mine daily for about a minute or so each day (I blend my matcha, then rinse off by blending clean water and then spin dry before I store it) every day for about a month now and it's still going strong on the original batteries. I am ready with spares for whenever they peter out, though. I checked the battery chamber to make sure I knew how to switch them out, and it's very easy. They are stacked in the end of the device, so you just twist off the end and slide out. There is a holder for the 3 batteries, so you pop them out/in and just slide it back into the main housing and twist it back on. The +/-indicators show which way to place them. I believe it's 2 one way and one the opposite way.
The attachments simply hold onto the spinning bit with tiny grooves in the spinner that fit snugly. They don't click into place or anything, but I have had no trouble with them feeling loose or anything while in use, as long as they are fully in place. Just slide them all the way in and you'll be fine.
Overall, this works well for my matcha tea and milk frothing needs. I tried it once with an egg to see how well it scrambled, but I used the single coil attachment and it seemed to slow down a lot in the gooey egg viscosity, so I can't say I would recommend it for scrambling eggs, especially if you are doing more than one at a time. However, I only tried once and only with the smaller, single coil attachment. You may have better luck with it if that's what you're looking to use it for.
Overall, I'm happy with my purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2019
★★★★★ 5
Great whisk, but stop changing the whisk design or sell extras
Color: Silver
Overall, I really like this frother. It’s my third one from the same brand. (They last about a year but kind of expected for $15.) I like that it comes with multiple whisks, that it can travel, and that the whisks are removable and can be thrown in the dishwasher. As others have pointed out, the batteries it comes with are pretty useless. I didn’t get even one proper whisk out of them. I also wish they wouldn’t change the whisk design every time I purchase. I like having extra whisks and just have to throw the old ones out. I wish these companies would sell extra whisks.
Update: after using this for a couple weeks, I really don’t like the design of he new whisk attachments. They’re hard to pull off without sending the tip flying.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 23, 2026
★★★★★ 5
Delightful little device now that I've had a practice run with it
Color: Silver
I just picked this up to make my own cappuccino and breve and I must say that I've fallen in love with the thing. My first use was a bit of a misfire owing to my inexperience with it, but the second time worked like a champ. The trick is to ensure that you have plenty of empty head space in the container to develop a good vortex and foam volume while still having a tall enough fluid column to keep the mixing head mostly submerged while generating the vortex.
My first attempt involved using about half a cup of half and half in a small saucepan. I had more than enough head space, but I was only barely able to keep the mixing head (it comes with two: a single turn coil and a 3-turn coil of coil) submerged and that went poorly, leaving me with a bit of a mess to clean up on my rangetop as the lack of fluid column ended up slinging the fluid around and out of the saucepan.
The second attempt went far better, as I transferred the barely-simmered half and half back into the Pyrex two-cup mixing cup in which i initially measured the 4 fl. oz. This time it worked beautifully. There was just enough unfoamed column height to keep the mixing head well covered prior to powering up and it just barely kept me sufficiently covered while powered up to maintain a very vigorous yet controlled vortex. This method also had the advantage of telling me exactly how much total foamed volume I had generated. The resulting breve had a wonderfully thick and frothy head in my mug and resulted in a delightfully topped beverage which, if anything, had a bit too much foam and a bit too little liquid. That's on me, however, since I wanted to get a feel for the device under better conditions to build my own experience; I'll just run the frother for less time next time.
Cleanup of the device itself is quite easy: simply detach the mixing head and shaft from the motor base and rinse. I always hand-wash my dishes, so I'm not in a good position to speak to its machine wash compatibility, but I suspect that it would come out just fine, provided that care is taken not to bend the shaft or coil head out of shape.
The device itself is small enough to fit in a purse and should travel quite nicely, though you'll need to commit to a single mixing head, which will almost certainly turn out to be the smaller one.
It's really nice to be able to make cappuccino/breve at home any time I see fit now. It's going to make a well-loved addition to my kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2018
★★★★★ 4
Worked well, fast, then overheated. Contacted Vomelon and they were quick to help me replace unit.
Color: Silver
Update ***Vomelon customer service is great! I contacted them about my issue, they responded quickly and worked to resolve it. They're giving me a new one! Hope this one works out. I'm adding back a star for their service.
Update 4/18/20 While making whipped Dalgona coffee today the unit slowed down the completely shut off. I pressed the power button again to restart and same thing, it starts at high speed then slows down and shuts off. I will be contacting seller. I’m taking away a star, can’t believe this is happening.
First day using this frother with the batteries provided and the body became very hot. Used it for about 3 minutes and the heat became uncomfortable in my hands. Took out the AAA alkaline batteries “Nai Li Wang” brand made in China and replaced them with some Kirkland AAA that I had on hand. Problem solved! No overheating with the new batteries. Throwing away the China made batteries. Would’ve been 5 stars if it weren’t for the overheating.
Other than that mishap, the frother was easy to use and pretty powerful. Whipped up my coffee with maple syrup (making Dalgona coffee) really quick. I like that it has a cover for storage. I don’t have much space so having a compact size with a cover is convenient, I can put it in a drawer or storage box without damage to the whisk.
Update: Day 2 of use
Body of unit became warm but not hot as with original batteries provided. I used new batteries. Had the unit on for 4-5 minutes to whip my dalgona coffee. Not sure if the unit is supposed to get warm? Is it normal? I will contact seller.
Besides that, my coffee got whipped pretty quick. I want to upload a photo but seems that Amazon has taken away that function for me? I could upload photos for my previous reviews on other products.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2020
★★★★★ 5
Great Little Frother.
Color: Silver, Color: Silver
I really like this this little frother. What I noticed first is that it comes with a cover for the frothing arm. That’s very practical if you travel with it. I have traveled with a frother before and I put it in a toothpaste box, not much protection there.
I use this 2 to 4 times a day. I can come pretty close to creating a Starbucks flat white at home. That saves $$$. The next thing I really like is that I can remove the arm for cleaning. If the arm does not come off clean up is a bit tricky.
How does it work? Great! It has one speed, Fast. The power button is on the base of the handle so I just had to adjust the way I hold the frother when I turn it on. One thing, make sure the froth head is all the way into the liquid when you start it, lol. This little machine whips up a thick froth fast.
It comes with 2 frothing heads, a three spring version as well as a standard one spring.
There is a lot of plastic, but it doesn’t look or feel cheap. Actually I think it helps keep the weight down. I travel some and I appreciate when things are light.
Over all, this is really nice it’s light portable and works great. I highly recommend this product.
I was given this product for review and I am so glad they choose to contact me. I have been frothing milk for my coffee for the last few years.
This has now became my go to frother.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2019
recommand products
Wotony Military tactical backpack, backpack for men black small tactical assault bag (Black, 20 inch)
52.00
Lafonn 0.53 CTW Station Bracelet
102.50
Lafonn 0.44 CTW Adjustable Sideways Cross Bracelet
190.00
JARWAM Travel Laptop Backpack 17 Inch, Durable Professional Travel Backpack for Men Women with LifetimeWarranty, Airline Approved Big Large Business Work School College Computer Backpack, Black
19.99
Lafonn 3.34 CTW Leverback Frameless Earrings
170.00