ICON K67113 7" Stage 3 Suspension System

Lift your 2017-2022 Ford F-250/350 6.7L Powerstroke 4WD with the Icon K67113 7" Stage 3 Suspension System from GAP. This Icon Vehicle Dynamics 7" suspension system is a great way to lift your 4WD 2017-2022 Ford F-250/F-350 Super Duty while drastically improving ride quality and performance. This suspension system is perfect for on-road and off-road use including towing, job site duty, and spirited off-road adventure. Icon's 7" Stage 3 System is comprised of dual rate coil springs, progressive leaf springs, radius arm drop brackets, adjustable track bar, dual opposing steering stabilizer kit, Icon 2.5 Aluminum Series piggyback reservoir front and rear shocks, plus all the necessary hardware for installation. With the endless hours Icon has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.

Features:

• Approximately 50% Increased Front Wheel Travel Over Stock
• Icon-Engineered Dual Rate Coil Springs Deliver Exceptional Vehicle Control Over Varying Terrain
• Progressive Leaf Springs Improve Ride Quality Without Reducing Towing Capacity
• Radius Arm Drop Brackets Correct Geometry And Caster For Optimal Alignment Specs
• Icon Shocks Feature Vehicle Specific Tune For Superior Performance And Ride Quality
• Shocks Are Fully Rebuildable And re-valvable
• 2.5 Aluminum Series Shocks Feature One-Piece Impact Extruded Aluminum Cylinders For Excellent Corrosion Resistance And Consistent Finish
• FK Rod End Bearings Provide Extended Longevity And Minimal Deflection
• Lifetime Guarantee Against Coil Spring Breakage Or Sag
• Lifetime Guarantee Against Icon Fabricated Component Breakage Or Manufacturer Defect

Notes:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" w/ 5.00" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 20x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Tech Note: 2020-UP Super Duty models have a lower ride height from the factory than 2017-2019 trucks. This results in an increase of approximately .75" of additional lift height over Icon's advertised numbers.
Application Note #6: Springs Are Rated For Diesel Engines Only
Application Note #8: This System May Require A Carrier Bearing Drop Bracket Kit (33700)
Application Note #31: '08 - Current Super Duty Models With Gas Engines May Need Exhaust Modified To Clear Front Driveshaft
Application Note #55: Shocks Are Fully Serviceable. Coil Over Heights Indicated Are For A Stock Equipped Vehicle
Application Note #57: Factory Block Must Be Used In Conjunction With Icon Leaf Springs For Truck To Sit Level
Application Note #118: OEM Stabilizer DOEs Not Work With Required Drag Link Flip On This Kit

Tech Note:
2017-2019 Super Duty models will have front lift height of 7" over stock.
2020-2022 Super Duty models without Tremor package will have front lift height of 7.75" over stock. May require taller rear blocks with springs to sit level.
2020-2022 Super Duty models equipped with Tremor package will have front lift height of 6.75" over stock. May require taller rear blocks with springs to sit level.
Brake line kit (Part # 61110) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)

Note:

Installation Manuals:
I37701P Installation Manual
I62530 Installation Manual
I64038 Installation Manual
I64055 Installation Manual
I67015 Installation Manual
I67035 Installation Manual
I67720P Installation Manual