Mamba Stack Basic F722 MK3 Stack 55A_128k 6S 32Bit (No WIFI)

Mamba Stack Basic F722 MK3 Stack 55A_128k 6S 32Bit (No WIFI)This new version of the popular Mamba F722 stack has been updated to include new tweaks such as better interference rejection, larger soldering pad area and a TVS high voltage protection. This is the Mamba basic stack that does not include wifi, but offers a great bang for the buck when it comes to your flight stack. This stack includes the new Mamba 55A 128K Blheli_32 ESC. Fixed Add I2C function When you connect the USB, the receiver and OSD settings

This new version of the popular Mamba F722 stack has been updated to include new tweaks such as better interference rejection, larger soldering pad area and a TVS high voltage protection. This is the Mamba basic stack that does not include wifi, but offers a great bang for the buck when it comes to your flight stack.

This stack includes the new Mamba 55A 128K Blheli_32 ESC.

Fixed

• Add I2C function
• When you connect the USB, the receiver and OSD settings can be saved
• Increase the pad area
• LED signal selection （when Mamba Led sys avaiable）
• BEC short circuit protection
• TVS instant high voltage protection 30V

Update

• Upgrade the anti-interference cable
• Use Typec（Most）
• The pad area of the Mini flight controller (20×20) increased by 140%

Added

• Add self-recovery insurance to the receiver's 5V power supply.
• Increase the camera VCC power supply pad.
• The standard flight controller (30.5×30.5) adds a spare pad.
• Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

FC Specifications

MAMBA Basic F722MK3
MCU: 216MHz STM32F722RET6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED（4 Set 2812 LED）
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (System Power)&
5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm, M3

ESC Specifications

MAMBA 55A F55_128K
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:50A×4
BURST CURRENT:60A (10S)
BEC: No

Target：BLHeli_32 MAMBA F55_128K
SOFT: Dshot300/600/1200
TVS Protection: Yes
MOUNTING: 30.5mm/M3

Additional Items Included with this Product

High-Frequency 470uF/35V ×1
8pin sh1.0 ×2
12AWG 100mm ×2
AMASS Original XT60