Hutton Curved Top Timber Gate 915mm x 1830mm

Hutton Curved Top Timber Gate 915mm x 1830mmThe Hutton Curved Top Timber Gate (915mm x 1830mm) is a pressure treated softwood garden gate suited to side hung residential entrances. Tongue and groove boards, a shaped arched top, and heavy duty rear bracing deliver a solid, attractive gate that fits left or right hand hanging straight from the box. Specifications Property Detail Material Sustainably sourced softwood Treatment TANALITH E pressure treatment Nominal Size 915mm wide x 1830mm high

The Hutton Curved Top Timber Gate (915mm x 1830mm) is a pressure treated softwood garden gate suited to side-hung residential entrances. Tongue and groove boards, a shaped arched top, and heavy-duty rear bracing deliver a solid, attractive gate that fits left or right hand hanging straight from the box.

Specifications

What it is used for

• Side access gates between the front and rear garden of a residential property
• Driveway pedestrian gates where a 915mm clear opening is required
• Rear garden boundary entrances alongside close board or feather edge fencing
• Replacement garden gates where a standard 3ft width fits the existing posts

Fitting and handling

On delivery, store the gate flat or upright in a dry, ventilated space and allow it to acclimatise for 48 hours before hanging, particularly during cold or wet weather. The gate is supplied ready for side-hung fitting and works with either left or right hand hinges, so check post positions before ordering ironmongery. Once hung, apply a suitable exterior timber finish or paint to all cut ends and rebates to maintain the preservative treatment and keep the warranty valid.

FAQ

Is the Hutton Curved Top Gate supplied with hinges and a latch?

No, ironmongery is not included. You will need to purchase hinges, a latch, and any bolts separately. Nottage Timber Merchants stock a range of gate ironmongery to suit this size of gate.

Does the TANALITH E treatment mean I do not need to paint or stain the gate?

TANALITH E protects against rot and insect attack, but it does not act as a surface finish. Applying an exterior stain or paint will improve appearance, help the gate resist weathering, and is recommended to maintain the 15-year warranty, particularly on cut ends made during fitting.

Can this gate be trimmed down to fit a narrower opening?

Minor trimming of up to 25mm per side is generally acceptable on tongue and groove softwood gates, but removing more than this risks weakening the outer stile. If your opening is significantly narrower than 915mm, a smaller gate size would be a better choice.

Nottage Timber Merchants supply garden gates and fencing materials to trade and retail customers across Bridgend and South Wales, with next-day delivery available to many local postcodes. Browse our full range of gate and fence ironmongery to complete your order.