Pay in installments of $212.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Being BON Series Natural Convection OvensOverview The BON Natural Convection Drying Oven series offers low air turbulences for gentle drying and heating. This is ideal for sterilization, powder drying and high temperature storage. The 4. 3 inch touchscreen controller provides fast, accurate, and uniform heat displacement. Users can preset 7 periods and 9 steps for a total of 63 programs. Temperature, time and heating rate can be set and programmed at the same time. The doors are engineered
Overview
The BON Natural Convection Drying Oven series offers low air turbulences for gentle drying and heating. This is ideal for sterilization, powder drying and high temperature storage. The 4.3-inch touchscreen controller provides fast, accurate, and uniform heat displacement. Users can preset 7 periods and 9 steps for a total of 63 programs. Temperature, time and heating rate can be set and programmed at the same time. The doors are engineered with airtight sealing and inner chambers are designed with corrosion resistant stainless steel. Safety alarms are installed for – overtemperature, over current protection, and temperature deviation. These ovens provide excellent temperature stability and reproducibility for all your desired application needs ensuring maximum efficiency, safety, and ease of use.
Features:
- Temperature Range:Amb+10°C - 300°C .
- P.I.D temperature controller provides accurate and reliable temperature control.
- Natural convection heating allows the sample temperature to be uniform, suitable for sterilization, powder drying and high temperature storage.
- Extended Life Silicone Rubber Gasket provides excellent sealing and long service life, but is easily replaced when the time for replacement is needed.
- Inner chamber is made from corrosion-resistant mirror stainless steel.
- Round curved inner angle is easy to clean.
- Anti-skid shelf design, easy to operate by single hand.
- Auto Start Feature after power loss/return.
- Temperature deviation alarm.
- Over temperature set point alarm.
- Over current protection.
- Independent overtemperature limit controller for added safety.
Key Attributes
|
Max Temperature |
300°C |
|
Max Capacity |
1.5, 1.8, 4.1, or 7.5 cu ft |
|
Air Movement |
Natural |
|
Electrical |
120V or 240V |
| Warranty | 2 years |
Manufacturer Specifications
| Model | BON-30 | BON-50 | BON-115 | BON-200 |
| Internal Volume | 1.1 cu ft (30 liters) | 1.8 cu ft (50 liters) | 4.1 cu ft (115 liters) | 7.5 cu ft (211 liters) |
| Temperature Range | Ambient+18 ℉ ~572 ℉ | Ambient+18 ℉ ~572 ℉ | Ambient+18℉ - 572℉ | Ambient+18 ℉ ~572 ℉ |
| Ambient+10℃ ~300℃ | Ambient+10℃ ~300℃ | Ambient+10℃ - 300℃ | Ambient+10℃ ~300℃ | |
| Uniformity at 100℃ | ±3.0 | ±3.0 | ±3.0 | ±3.0 |
| Temperature Stability | ±0.5℃ | ±0.5℃ | ±0.5℃ | ±0.5℃ |
| Display Resolution | 0.1 | 0.1 | 0.1 | 0.1 |
| Maximum # of Shelves | 5 | 6 | 10 | 16 |
| # of Shelves | 2 | 2 | 2 | 2 |
| Max. Load per Shelf | 20Kg | 20Kg | 20Kg | 20Kg |
| Internal Dimension (WxHxD) | 12.6×12.6×11.8 (inch) | 15.8×14.9×13.0 (inch) | 20.5×19.4×17.7 (inch) | 25.6×25.6×19.6 (inch) |
| 320×320×300 (mm) | 400×380×330 (mm) | 520×495×450 (mm) | 650×650×500 (mm) | |
| External Dimension (WxHxD) | 24.0×22.8×20.5 (inch) | 27.2×25.2×18.4 (inch) | 31.9×29.7×23.2 (inch) | 37.0×35.8×25.9 (inch) |
| 610×580×520 (mm) | 690×640×468 (mm) | 810×755×590 (mm) | 940×910×658 (mm) | |
| Net Weight | 43Kg | 45Kg | 74Kg | 103Kg |
| Timer | 1~5999mins | 1~5999mins | 1~5999mins | 1~5999mins |
| Electrical Requirement | 120V 60Hz | 120V 60Hz | 120V 60Hz | 240V 50/60Hz |
| Power Consumption | 1200W | 1600W | 1800W | 2250W |
| Heating Rate to 100℃ | 40 mins | 40 mins | 40 mins | 40 mins |
| Cat. No | BO211030U | BO211050U | BO211120U | BO211200C |
| Warranty | 2 years | 2 years | 2 years | 2 years |
| Certification | CSA | CSA | CSA | CSA |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 20 reviews
Sort
Product Reviews
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out.
I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you.
A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine.
Now for the machine itself...
The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great.
If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front.
Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want.
I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.)
I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy.
It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything.
OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Would buy again!!!
Color: Dark Grey, Size: 7 Seat
⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style!
I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over.
The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept!
I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks.
Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together.
Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2025