AA RZR Turbo 2.5" Electronic Side Dump Cutout Exhaust Head Pipe | 110-1012

AA RZR Turbo 2.5" Electronic Side Dump Cutout Exhaust Head Pipe | 110-1012Looking for a header to complete the look for your slip on exhaust? Then you need the AA stainless XPT header. This is a 2. 5" design which is the same size as factory. We found going to a 3" system to makes zero difference on power, but many customers wanted a nicer looking header. This one offers great looks by having a slightly better design off the turbo to help release exhaust from the turbo quickly. It also has a bellow style flex joint which is

Looking for a header to complete the look for your slip-on exhaust? Then you need the AA stainless XPT header. This is a 2.5" design which is the same size as factory. We found going to a 3" system to makes zero difference on power, but many customers wanted a nicer looking header. This one offers great looks by having a slightly better design off the turbo to help release exhaust from the turbo quickly. It also has a bellow style flex joint which is sleeved inside for uninterrupted flow inside the header. Electronic cutout allows to switch on the fly from muffled to wide open straight pipe for maximum power Fits 2016-2021 RZR XP Turbo, Turbo S & 2020-Up Pro XP/Turbo R Models 2019-2021 California Evap/Wideband models (with a blue O2 sensor lead in the exhaust) will use a larger bung Most XPT's are non-Cali/Wideband models and use the small bung which is pictured on the RZR Matches our slip-on exhaust perfectly Stainless steel with the highest quality flex bellow for improved flow and longevity Hydroblasted finish with rust inhibitor Does not use factory heat shielding and should only be used with a slip-on exhaust with no catalytic converter Includes wire harness Made at our facility in the USA Part number: 110-1012-TS - Small O2 (2016-2020 Models) Part number: 110-1012-CA - Large O2 (2019+ Cali Evap/Wideband Models with the blue O2 sensor lead) Part number: 110-1012-PXP - All Pro XP & Turbo R Models