Carli 2.5" Leveling Coil Over Bypass 2.5 Suspension System 05-07 Ford 6.0L Powerstroke

Carli 2.5" Leveling Coil Over Bypass 2.5 Suspension System 05-07 Ford 6.0L PowerstrokeTaking the standard Carli Coilover Leveling System to an entirely new level, the Bypass version allows you to take further advantage of the coilovers for unrivaled suspension cycling performance. This is not a "lift kit,"`it is a true suspension system. This is one of Carli's most capable off road systems. Similar in street ride to the Coilover and Pintop kit with seemingly no bottom, they spec'd this system with King 2. 5" Front Coilovers, 8" Stroke

Taking the standard Carli Coilover Leveling System to an entirely new level, the Bypass version allows you to take further advantage of the coilovers for unrivaled suspension cycling performance. This is not a "lift kit,"`it is a true suspension system.

This is one of Carli's most capable off-road systems. Similar in street ride to the Coilover and Pintop kit with seemingly no bottom, they spec'd this system with King 2.5" Front Coilovers, 8" Stroke 2-Tube Front Bypasses, 12" Stroke Rear 3-Tube Bypass with an oversized rebound tube. This system is also height adjustable approximately 1" to compensate for large bumpers/winches.

Carli Custom Tuned King Shocks

The Coilover Bypass system boasts Carli specific, blueprinted, King 2.5" shocks on all four corners. In an effort to provide you with the best product, Carli designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; the shocks are then tuned around the custom pistons based on the only thing that truly matters, seat-of-the-pants feel. ALL of Carli's King shock offerings are rounded off with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King's standard shafts, there is no coating to wear off, weather can't hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn't damaged as they're not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55° F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a replaceable moisture barrier.

Base Kit Components

The truck will sit 2.5" higher in the front and have more wheel travel thanks to the Coilovers. Stainless Brake Lines and an Adjustable Track Bar round off the front end geometry correction while Caster Shims improve on the stock handling. The rear is outfitted with a block eliminating Full Progressive Spring Pack lifting it 2" requiring no block to achieve proper ride height in the rear. The result is extended travel and a softer ride while wheel hop/axle wrap are minimized at the cost of 15% less load capacity than a stock F-250.

The rear is outfitted with a Full Progressive Spring Pack requiring no block to achieve proper ride height; thus, travel is extended and wheel hop/axle wrap minimized at the cost of 15% less load capacity than a stock F250. The Coilover-Bypass is an Off-Road oriented system; thus, we recommend the purchase of a Differential Guard for axle protection, High Mount Steering Stabilizer for steering control and Fabricated Radius Arms for strength and Limit Strap mounting. At this level of suspension, a roll cage is also recommended if the system will be used to its full potential.

Being bypass equipped, you can expect to hear clicking from the opening and closing of the check valves in the external tubes of the shocks. On the bright side, the suspension is tuned by Carli, but fully adjustable to your preference. You can turn tubes for more float and ride comfort or engage more valving for better control and off-road performance. From Carli, these shocks are setup with a wide open rebound and neutral compression (Carli's recommended, all-around specification).

FULL PROGRESSIVE LEAF SPRING KIT SPECIFICATIONS:

• 37" Tire Fitment
• Provides a 1/2", rear high stance to Carli Leveling Suspension Systems
• Includes new U-Bolts and Rear Bump Stop Drops
• Full Replacement Leaf Spring option requires NO BLOCKS to achieve level stance
• Installation of the full replacement leaf springs will require you to relocate the front spring hanger. Carli opted to utilize the springs for the 2008-2010 model years because their performance greatly outweighs the capabilities of the shorter springs found on the 2005-2007 models.