Acustop Acoustic Floor Deck | 2400mm x 600mm

Acustop Acoustic Floor Deck | 2400mm x 600mmTwice recycled PET mat laminated to P5 PEFC & FSC T&G Chipboard. Boards are manufactured from PEFC & FSC certified chipboard with a heat treated green top surface finish bonded to a 100% twice recycled 10mm PET mat. Sheets are supplied in a 2400mm x 600mm board, either 28mm or 32mm thick (including the mat) for the acoustic treatment of concrete and timber floors when used in conjunction with a recognised acoustic ceiling treatment. The system can be

Twice recycled PET mat laminated to P5 PEFC & FSC T&G Chipboard.

Boards are manufactured from PEFC & FSC certified chipboard with a heat-treated green top surface finish bonded to a 100% twice recycled 10mm PET mat.

Sheets are supplied in a 2400mm x 600mm board, either 28mm or 32mm thick (including the mat) for the acoustic treatment of concrete and timber floors when used in conjunction with a recognised acoustic ceiling treatment. The system can be installed over an existing timber or concrete subfloor, or onto timber joists with the addition of our acoustic joist isolation strips.

It should be noted that the 28mm board direct to joists application can only be fitted at a maximum of 400mm joist centres with joist strips. For joists built at 600mm centres the 32mm thick board should be used also with self-adhesive joist strips.

It is the customers responsibility to ensure that the subfloor or joists can provide the support required. Noggins/additional support must be fitted when required. No boards should be installed with unsupported ends.

Boards are installed as a floating floor system with the requirement of our acoustic perimeter strip to ensure isolation of the boards from the superstructure and skirting boards.

KEY FEATURES

• Low profile acoustic solution

• Twice recycled PET Mat

• 14 recycled bottles used for every board

• PET mat considered hypoallergenic

• Extremely low VOCs

• PEFC & FSC chipboard

• P5 moisture resistant

• Hard wearing surface

• Suitable for carpets with underlay

• Suitable for LVT & vinyls

• Can be tiled over in conjunction with a decoupling mat

PERFORMANCE

Tekfon Acustop Chipboard 28 & 32 require that all components are utilised as specified. The ceiling treatment below the subfloor or joists is also vital for the performance of the system.

The Tekfon components are as follows:

• Tekfon Acustop Chipboard 28 or 32mm

• Tekfon Perimeter Strip

• Tekfon Self-Adhesive Joist Strip

• Tekfon Water Resistant 2 in 1 Adhesive

• Tekfon Acoustic and Intumescent Mastic

The ceiling treatment requires the use of 2 layers of 15mm Acoustic plasterboard fitted onto resilient bars* at 400mm centres. Additionally, a 100mm 60kgm3 slab should be fitted between the joists , or into the ceiling void below the subfloor to complete the treatment. All edges to be sealed with acoustic sealant.

Data Sheet

Click here for Data Sheet