SKU: 9032342340

Klein Tools 32561 Stubby Multi-Bit Screwdriver Nut Driver 6-in-1 Set Compact Cushion Grip Tool with Phillips and Slotted Bits

$18.88 $20.98
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $5.25 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 26 - Oct 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Klein Tools 32561 Stubby Multi-Bit Screwdriver Nut Driver 6-in-1 Set Compact Cushion Grip Tool with Phillips and Slotted BitsMaximum Torque in Minimal Space Conquer the tightest workspaces with the Klein Tools 32561 Multi Bit Stubby Screwdriver Nut Driver. Designed specifically for professional electricians, HVAC technicians, and maintenance workers, this compact tool eliminates the frustration of working in obstructed areas where standard screwdrivers simply won't fit. With an interchangeable shaft that adjusts in seconds, it packs the utility of six different tools into

Maximum Torque in Minimal Space

Conquer the tightest workspaces with the Klein Tools 32561 Multi-Bit Stubby Screwdriver / Nut Driver. Designed specifically for professional electricians, HVAC technicians, and maintenance workers, this compact tool eliminates the frustration of working in obstructed areas where standard screwdrivers simply won't fit. With an interchangeable shaft that adjusts in seconds, it packs the utility of six different tools into one lightweight, pocket-sized package, making it an essential addition to any tool belt or diagnostic bag.

Despite its small stature, the 32561 delivers uncompromising performance. The signature Klein Cushion-Grip™ handle is engineered to provide greater torque and non-slip comfort, allowing you to apply necessary force without hand fatigue. The industrial-strength bits are heat-treated for exceptional durability, ensuring they resist stripping and wear over time. Whether you are tightening terminal block screws inside a cramped control panel or adjusting fasteners in an appliance, this stubby driver offers the precision and strength required for the job.

Key Features

  • Compact Stubby Design: Features a standard 1-1/4 inch shaft that allows for easy access into confined and hard-to-reach work spaces.
  • 6-in-1 Versatility: Seamlessly converts between 2 nut driver sizes and holds 4 universal screwdriver tips to handle multiple fasteners.
  • Premium Comfort: Equipped with Klein's exclusive Cushion-Grip™ handle for maximum torque delivery and reduced operator fatigue.
  • Industrial Durability: Bits are heat-treated and manufactured from high-quality steel to withstand heavy daily use.
  • Interchangeable Shaft: The modular shaft design allows for quick bit changes and holds tips securely during operation.
  • High-Visibility Handle: The classic yellow and black design makes the tool easy to locate in a crowded tool bag or dark environment.

What's Included

  • (1) Stubby Cushion-Grip™ Handle
  • (1) Interchangeable Shaft
  • (1) Double-Ended Phillips Bit (#1, #2)
  • (1) Double-Ended Slotted Bit (3/16 in., 1/4 in.)

Specifications

Manufacturer Klein Tools
Model Number 32561
Type Stubby 6-in-1 Multi-Bit
Nut Driver Sizes 1/4 in., 5/16 in.
Phillips Bits #1, #2
Slotted Bits 3/16 in., 1/4 in.
Shank Length 1.266 in.
Overall Length 3.25 in.
Bit Retention Quick Change
Handle Type Cushion Grip
Weight 2.6 oz.
Insulated No

Pro-Tip: While stubby screwdrivers are famous for fitting in tight spaces, they are also excellent for applying high torque to small fasteners. The larger diameter handle relative to the short shaft allows you to put significant turning force into the screw with the palm of your hand.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 9032342340

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Houston, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Whiting, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Verified Purchase
Andy Sims
Carnegie, US
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
Y
Verified Purchase
Yuliet carreño cutiño
Chelsea, US
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
N
Verified Purchase
Nana rice
San Leandro, US
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026

recommand products

Epic Art 'Changed My Mind 5' by Aleah Koury, Acrylic Glass Wall Art
39.99
LASYA SHIV-PARVATI SET OF 3 ( kurta + churidar + jacket )
5350.00
Lakshmi Dupatta
2750.00
Epic Art 'Breakthrough' by Ann Gordon, Acrylic Glass Wall Art
47.99
Harshini Set (set of 2)
7750.00