Pay in installments of $216.27 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 26 - Jul 31
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LTMR08PFMMain Range TeSys Product name TeSys T Device short name LTMR Product or component type Motor controller Device application Equipment monitoring and control Measurement current 0. 48 A [Us] rated supply voltage 100 240 V AC 50 60 Hz Current consumption 8 62. 8 mA Supply voltage limits 93. 5264 V AC Communication port protocol Profibus DP Bus type Profibus DP polarised 2 wire RS485 interface, addressing 1 125, transmission rate 9. 6 kbit s 12 Mbit s,
Main
| Range | TeSys |
| Product name | TeSys T |
| Device short name | LTMR |
| Product or component type | Motor controller |
| Device application | Equipment monitoring and control |
| Measurement current | 0.4…8 A |
| [Us] rated supply voltage | 100...240 V AC 50/60 Hz |
| Current consumption | 8...62.8 mA |
| Supply voltage limits | 93.5…264 V AC |
| Communication port protocol | Profibus DP |
| Bus type | Profibus DP polarised 2-wire RS485 interface, addressing 1...125, transmission rate 9.6 kbit/s...12 Mbit/s, SUB-D 9 with 2 shielded twisted pairs, type A Profibus DP polarised 2-wire RS485 interface, addressing 1...125, transmission rate 9.6 kbit/s...12 Mbit/s, terminal block with 2 shielded twisted pairs, type A |
Complementary
| [Ui] rated insulation voltage | 690 V conforming to EN/IEC 60947-1 690 V conforming to CSA C22.2 No 14 690 V conforming to UL 508 |
| [Uimp] rated impulse withstand voltage | 4 kV supply, inputs and outputs conforming to EN/IEC 60947-4-1 6 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-1 0.8 kV communication circuit conforming to EN/IEC 60947-4-1 |
| Short-circuit withstand | 100 kA conforming to EN/IEC 60947-4-1 |
| Associated fuse rating | 4 A gG for output 0.5 A gG for control circuit |
| Protection type | Locked rotor Overload Phase unbalance Phase failure Earth-leakage protection Reverse polarity protection Load fluctuation Thermal protection Power factor variation Thermal overload protection Overload (long time) |
| Network and machine diagnosis type | Phase fault and earth fault trip counters Trip history information Starting current and time Fault recording Waiting time after overload tripping Event recording Motor control command recording Running hours counter/operating time Trip context information Remaining operating time before overload tripping |
| Logic input number | 6 |
| Input current | 3.1 mA at 100 V 7.5 mA at 240 V |
| Current state 0 guaranteed | Logic input: 0...40 V and <= 15 mA for 25 ms |
| Current state 1 guaranteed | Logic input: 79...264 V and >= 2 mA for 25 ms |
| Maximum output switching frequency | 2 Hz |
| Load current | 5 A at 250 V AC for logic output 5 A at 30 V DC for logic output |
| Permissible power | 480 VA (AC-15), Ie = 2 A, 500000 cycles (output) 30 W (DC-13), Ie = 1.25 A, 500000 cycles (output) |
| Maximum operating rate | 1800 cyc/h |
| Contacts type and composition | 1 NO + 1 NC fault signal 3 NO |
| Metering type | Average current Iavg Earth-fault current Temperature Imbalance current Phase current I1, I2, I3 RMS |
| Measurement accuracy | 5...15 % earth fault current internal measurement (for current > 0.1 A) 1 % voltage (100...830 V) 3 % power factor (cos φ > 0.6) 5 % earth fault current external measurement (< 5 % or 0.01 A) +/- 30 min/year internal clock 0,02 temperature 1 % current 5 % active and reactive power |
| Overvoltage category | III |
| Connection pitch | 5.08 mm |
| Connections - terminals | Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible with cable end Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) solid without cable end Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) flexible with cable end Control circuit: connector 2 cable(s) 0.2…1.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 2 cable(s) 0.5…1.5 mm² (AWG 24...AWG 14) flexible without cable end Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) solid without cable end |
| Tightening torque | Control circuit: 0.5…0.6 N.m flat screwdriver 3 mm |
| Pollution degree | 3 |
| Electromagnetic compatibility | Electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3 Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4 Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4 Voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11 Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6 Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5 Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5 Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5 Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5 Control circuit: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 |
| Width | 91 mm |
| Height | 61 mm |
| Depth | 122.5 mm |
| Net weight | 0.53 kg |
| Web services | Web server |
| Compatibility code | LTMR |
Environment
| Standards | UL 508 IEC 60947-4-1 EN 60947-4-1 IACS E10 CSA C22.2 No 14 |
| Product certifications | CSA C-Tick UL CCC LROS (Lloyds register of shipping) NOM ABS GL EAC BV DNV RINA RMRoS ATEX KERI |
| Protective treatment | 12 x 24 hour cycles conforming to EN/IEC 60068-2-30 48 h conforming to EN/IEC 60070-2-11 TH conforming to EN/IEC 60068 |
| Fire resistance | 650 °C conforming to EN/IEC 60695-2-12 960 °C conforming to UL 94 |
| Ambient air temperature for operation | -20…60 °C |
| Ambient air temperature for storage | -40…80 °C |
| Operating altitude | <= 2000 m without derating |
| Mechanical robustness | Vibrations mounted on symmetrical rail: 1 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6 Vibrations plate mounted: 4 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6 Shocks half sine wave acceleration: 15 Gn for 11 ms conforming to EN/IEC 60068-2-27 |
| IP degree of protection | IP20 |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Under investigation |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 5
Great buy, good quality and really nice results!
Color: Dark, Color: Dark
I really like how silk and smooth this tanner feels! It’s not sticky tacky goop like some other brands can be and it’s really effective. Applying it went well as the product isn’t too thick or too thin, so making an even coat wasn’t an issue. It has a dark green tint which makes the product give its deep rich glow which is good for some medium toned to darker tone flesh colors. The effect is as though you’ve been in the sun deep in the tropics near the equator getting a daily golden caramel baked glow from some strong sun rays for a couple weeks. Works great and could be used for other than face in a pinch if needed...though you’ll probably want to buy a bigger bottle first because you’ll love it!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 26, 2020
★★★★★ 5
Works great - don't let the dark color freak you out
Color: Dark
I am a reasonably fair skinned Caucasian person whose body can become moderately tan but my face does not, just burns and freckles. I don't tan my face at all and require a self tanner that makes my face color match my body. I have tried many expensive ones, and this is the best and most reasonably priced I have found. The stain works almost immediately and dries quickly so you have to work fast to smooth it evenly over your face. I skip the step of wearing a glove to apply and wash my hands immediately afterward but usually have to scrub with a wash cloth to get the color off. if you wait several minutes, you can add another layer to deepen the color (wash hands in between layers) but I use a generous amount with the first application so I usually don't have to. Most of the other facial self tanners I have tried have not been dark enough, even with multiple applications. This gives you a noticeable tan with just one application. Warning: it comes out of the bottle very alarmingly dark but it won't be dark like that after you apply it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 26, 2018
★★★★★ 4
Great face self tanner
Color: Dark, Color: Dark
I only gave 4 stars because the Dark wasn’t that dark so the product isn’t very pigmented
In a sense that’s good so you don’t go too over board but for someone who’s very fair and wants to get a dark tan it’s probably be difficult
I love the smell, I was parried it would smell funny, the loving tan kind of smells like Dirt and this one smells like flowers and sweets.
Not sticky and fast drying so I think it’s good for the face
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2020
★★★★★ 5
Works fast and looks natural
Color: Dark
I have used a lot of facial tanners, and this one is a winner, by far the best I've tried. After only 3 applications, I see a definite difference in my skin tone. The color looks like a natural, sun-acquired tan. You only need a little, easily applied with the gloves that come with your order. I put it on at night before bed and let it dry. Protect your pillow though, as some of the tint rubs off. I really like this tanner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 7, 2018
★★★★★ 3
Not as dark as a need for my pale complexion
I gave this product three stars because I don't think it is dark enough. You need to put it on daily and thick to keep color, if you have a pale complexion. However, the lotion does not make me break out, is a quality tanner, was affordable, and was shipped fast.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 4, 2016
recommand products
Peas in a pod pun love sheep pot
189.00
NicBex Haerin-SD-00288-LWJ Dining Chairs, 17.1"x14.6"x37.7", Black
159.47
Mug
181.00
EZ-FLO 20-Amp 125-Volt Recessed GFCI Residential Duplex Outlet with Wall Plate, White
17.98
Roundhill Furniture Noyes Faux Leather Metal Frame Dining Chair, Set of 4, Black
113.98