Pay in installments of $8.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 18 - Aug 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
zep fotolijst v4557n malmo natural 9x13 13x18 cmDe Zep Fotolijst V4557N Malmo Natural is geschikt voor 1 foto met een afmeting van 9x13 cm of, dankzij de passe partout 1 foto van 13x18 cm. En met zijn strak en modern design gecombineerd de fotolijst een praktische luxe toe. De fotolijst kenmerkt zich door zijn houten look. De totale afmeting, inclusief de lijst, bedraagt 15x20,5 cm. De gehele Malmo serie wordt geproduceerd in Europa. Toepassing Zep Fotolijst V4557N Malmo Naturel 9x13 13x18 cm De
De Zep Fotolijst V4557N Malmo Natural is geschikt voor 1 foto met een afmeting van 9x13 cm of, dankzij de passe-partout 1 foto van 13x18 cm. En met zijn strak en modern design gecombineerd de fotolijst een praktische luxe toe. De fotolijst kenmerkt zich door zijn houten look. De totale afmeting, inclusief de lijst, bedraagt 15x20,5 cm. De gehele Malmo serie wordt geproduceerd in Europa.
- Toepassing Zep Fotolijst V4557N Malmo Naturel 9x13 / 13x18 cm
- De fotolijst is geschikt voor verticale en horizontale plaatsing.
- Ook kan de fotolijst zowel horizontaal als verticaal aan de muur gehangen worden.
- Fotolijsten van Zep Italia
- De fotolijsten van Zep Italia staan bekend om hun hoge kwaliteit en luxe afwerking.
- Er wordt gebruik gemaakt van glas met een hoge lichtdoorlatendheid en duurzame materialen.
- De fotolijsten zijn gemaakt met oog voor detail en voorzien van leuke details.
- Voor elk interieur en smaak zijn er passende ontwerpen beschikbaar: sommige lijsten kenmerken zich door hun strakke vormgeving, terwijl anderen een nonchalante, gezellige sfeer creëren met hun vintage uitstraling.
- Groot assortiment
- Benel heeft een groot deel van de Zep Italia fotolijsten in het assortiment opgenomen.
- Heeft u een mooie fotolijst gezien, maar voldoet het formaat niet aan uw wensen? Dan kunt u duidelijk contact opnemen met ons.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026