Street Schroefsets geschikt voor VW Transporter T6 T6.1 Van T26 T28 T30 2015-2024 2.0 TDI

Street Coilovers compatible for VW Transporter T6 T6.1 Van T26 T28 T30 2015-2024 2.0 TDI

Dit MaXpeedingRods onderdeel is geschikt voor Volkswagen-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Notice:No Top Mount Included. Modification Required If You Use OE Top Mount

Fitment

for T26 /T28 / T30

Geschikt voor VW Transporter T5 / T5.1 2003-2015

Geschikt voor VW Transporter T6 / T6.1 2015-present

for Kombi Caravelle Multivan

Including engines 2.0, 3.2V6, 1.9TDi, 2.0TDi, 2.0 Bi TDi, 2.5TDi.

excluding T32

Specificatiess

Front Lowering: 30-95mm (depends on the vehicle models)

Rear Lowering: 30-80mm(dependson the vehicle models)

Damping: Fixed Damping

Spring Rate Front: 8.5 kg/mm (476 lbs/in)

Spring Rate Rear: 13.5 kg/mm (756 lbs/in)

Spring length Front: 215 mm

Spring length Rear: 168 mm

Top mounts: Front and rear OE top mounts required

Spring Preload advised: 7-10 mm

Shock Type: Twin Tube

Quantity:

2x Front coilovers

2x Rear coilovers

2x C spanners

Kenmerken

1. Lower height adjustable (depends on vehicle models)

2. Dust boot, solid rubber bump stops

3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets

4. Simple install, Easy to adjust.

5. Use the vehicle's original upper mounts (not included in our product kit).

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.

3. Impact wrench is prohibited during the installation, it will loosen or damage the product.

4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)

5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.