geschikt voor Honda Prelude Full Damper Adjustable Coil Spring Strut Schroefsets 1992 - 2001 Lowering Kit

Compatible for Honda Prelude Full Damper Adjustable Coil Spring Strut Coilovers 1992 - 2001 Lowering Kit

Dit MaXpeedingRods onderdeel is geschikt voor Honda-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Introduction Ma Xpeeding Rods-SLC based on Ma Xpeeding Rods-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.Toepassing Compatible For HONDA PRELUDE BB1-BB9 1992-2001 Let op:This coil-over is perfectly suitable with TYPE S, SiR, and S SPEC which has strut tower bar mounting points.It can also be used directly for some USDM Preludes which have reserved factory mounting points.For some models without mounting points, you can remove the 2 additional studs.Specificaties Top mounts: pillow ball top mounts Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in)Spring rate Rear: 7 kg/mm (392 lbs/in)Spring length Front: 180mm Spring length Rear: 200mm Adjustable height: lowering 1-3 inch Coilover overall length Front: 420mm-465mm Coilover overall length Rear: 550mm-645mm Shock type: Twin tube Spring preload: 7-10 mm Color: red Garantie: one year warranty for any manufacturing defect Package includedcomplete coilovers for 2 front and 2 reara pair wrench for height adjustment Dimensionweight: 23860gsize: 63*51*21 cm Kenmerken1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.3. Twin-Tube structure allows sufficient stroke within the shock absorber.4. Separate height adjustment does not affect damper stroke.5. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability and performance.6. Height Adjustment tools included.7. Pillow ball top mount - It improves the steering feel and response.8. Most pieces in our coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components.9. Full rebuildable.