SKU: 67830037460

5 meter koud wit led strip - 60Leds/m - 5630

$23.36 $25.95
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $6.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

5 meter koud wit led strip - 60Leds/m - 56305 meter koud wit led strip 60Leds m 5630 koud witte ledstrip power led, 60 leds per meter Voorzien van 3M plakstrip in te korten om de 3 leds Dimbaar CRI >90 3x feller Power Led 10mm breed 5 meter koud witte ledstrip met 60 LEDs per meter Met onze 5630 powerleds12V LED strips creert u eenvoudig een warme sfeer. Daarnaast verbruiken onze 60 leds per meter power ledstrips maar slechts 30W. De LED strips zijn eenvoudig in te korten om de 3 leds en hebben

5 meter koud wit led strip - 60Leds/m - 5630

  • koud witte ledstrip power led,
  • 60 leds per meter
  • Voorzien van 3M plakstrip
  • in te korten om de 3 leds
  • Dimbaar
  • CRI >90
  • 3x feller Power Led
  • 10mm breed

5 meter koud witte ledstrip met 60 LEDs per meter

Met onze 5630 powerleds12V LED strips creert u eenvoudig een warme sfeer.
Daarnaast verbruiken onze 60 leds per meter power ledstrips maar slechts 30W.
De LED strips zijn eenvoudig in te korten om de 3 leds en hebben een 3M plakstrip aan de achterzijde.
Hierdoor zijn de koud witte strips eenvoudig te monteren.
Alle leds zijn gemonteerd op een witte strip, deze strip zorgt voor een optimale licht en kleurweergave.

Toepassingen

Onze LED strips worden veel toegepast als sfeerverlichting.
Zo zien wij onze koud witte LED strips veel terug als keukenverlichting, traptrede verlichting en in vitrines.
Alle LED strips van ABC-led zijn gemaakt uit professionele componenten, hierdoor garanderen wij een lange levensduur .

5630 SMD's

Onze 5630 power leds hebben hun naam te danken aan hun afmeting en licht opbrengst.
5630 staat namelijk voor 56mm x 30mm, in tegenstelling tot de regulieren 5050 leds .
De 5630 led's hebben maar 1 led per behuizing en zijn daardoor kleiner en hierdoor mooi weg te werken in ruimtes waar u niet veel speling heeft.
Onze powerleds hebben een lichtopbrengt van 50 lumen per LED dit is ongeveer 3x zoveel als een standaard 5050 led.
Het verbruik van de 5630 ledstrips is daarn, de 60 leds per meter strips verbruiken 30W per meter.

Montage

LED strips van ABC-led zijn eenvoudig te monteren zelfs als u geen verstand heeft van elektra.
U kunt de strips om de 3 leds op maat knippen, aan de achterzijde zijn de strips voorzien van een 3M plakstrip voor gemakkelijke montage.
Daarnaast zijn de strips voorzien van een handige connector zodat u de strips zonder solderen aan kunt sluiten aan de voeding en/of een controller.

aanrader! Plaats de ledstrip in een LED strip profiel voor een mooie en strakke afwerking. Als u direct in de profiel kijkt kies dan voor een diffuser .

Voeding

De koud witte ledstrips / controllers dienen gevoed te worden door een LED voeding / LED trafo.
De voedingen van ABC-led zijn speciaal ontwikkeld voor gebruik bij LED verlichting.
Hierdoor zorgen de LED voedingen / LED trafo's voor een langere levensduur van uw ledstrips.

U kiest de juiste 12V voeding als volgt: aantal meter ledstrip x 2.5 Ampere
Voor deze 5 meter ledstrip is dat: 5x 2.5A = 12.5A
Belast de voeding tot max 80% van zijn maximale vermogen.
Kies in het geval van deze 5 meter lange ledstrip dan voor de 12V, 13A voeding.

Uitbreiden met een dimmer?

Om de gewenste lichtsopbrengst in te stellen heeft u een controller nodig.
De aansluitvolgorde is als volgt: 230V > LED voeding > controller > koud witte ledstrip.
U kunt eventueel in de optie set boven aan de pagina kiezen voor onze meest bestelde LED dimmer tbv ledstrip wit en de bijpassende voeding voor deze led strip.

U kunt ook uw koud witte ledstrip bedienen via uw smartphone, hiervoor heeft u onze speciale slimme wifi controller nodig.

SPECIFICATIES
  • Kleur: koud wit
  • Kleur temperatuur: 6500 K
  • Lichthoek: 120 graden
  • Ampere per meter: 2.5A
  • Dimbaar: Ja
  • Aantal LED's: 60 per meter
  • Voltage: 12V
  • 3x meer lichtopbrengs
  • 5630 Power leds
  • Levensduur: 50.000 uur
  • Per 3 leds in te korten!
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 67830037460

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Ed Train
Lowell, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
V
Verified Purchase
V88
Pawtucket, US
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
G
Verified Purchase
Gummy Roach
Draper, US
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals. These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together. The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug. I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
K
KBar
Alexandria, US
★★★★★ 5
Heavy-Duty 4 AWG Cable With Flexible Insulation
Size: 10ft, Color: 4awg
I am satisfied with this 4 AWG cable. The insulation coating is soft, and the cable itself is very pliable, making it easy to bend and route into the configuration needed for installation. Despite the flexibility, it still feels like a heavy-duty cable designed to handle demanding applications. I am using this cable to provide the necessary amperage to start the generator on my trailer, and it performs as expected. I also like that the wire gauge and cable properties are clearly printed along the side of the insulation, making identification easy during installation or future maintenance. The cable arrived in good condition with no obvious odor from the insulation or packaging. Overall, this appears to be a quality heavy-duty cable that is flexible, easy to work with, and suitable for high-current applications.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
H
hazard2k
Massapequa, US
★★★★★ 5
True copper battery cables that are high quality
Size: 10ft, Color: 4awg
I love having heavy duty cable on hand for my cars. It's so nice to be able to make your own starter and alternator cables when restoring cars. These cables are 100% copper, not CCA (copper clad aluminum) like many others are. Copper is far superior for conductivity and handling higher loads. The rubber on the cable is thick and yet very flexible..it's clearly marked and seems very durable. I like to use a hydraulic crimping tool and then add marine grade heat shrink tubing with the adhesive inside of it to keep it as weatherproof as possible.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026

recommand products

Primadonna Madison hotpants Black Tailor
31.43
Marie Jo Louie rioslip satin taupe
34.90
Marie Jo Avero rioslip caffé latte
39.90
Unipanel schroef 4x50 100st incl.dopjes
41.97
Keralit inwendig hoekprofiel
61.32