SKU: 73611688702

ZERO – NATUURLIJKE ANTI-AANBAK KOEKENPAN 22CM

Sale price$62.99 Regular price$69.99
Save 10%

Pay in installments of $17.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 21 - Aug 26

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ZERO – NATUURLIJKE ANTI-AANBAK KOEKENPAN 22CM[badge WI26Badge start badge WI26Badge end][badge BEbadge start badge BEbadge end] [badge ZERObadge start badge ZERObadge end] Testwinnaar in Berlingske 2026 Fysieke coating geen chemicalin, alleen puur anti aanbakvermogen Nano getextureerd staal ontworpen voor maximale duurzaamheid Krasbestendig oppervlak geschikt voor stevig keukengerei en dagelijks gebruik 5 jaar garantie voor consistente, duurzame kwaliteit Geschikt voor alle fornuizen, inclusief

[badge-WI26Badge-start badge-WI26Badge-end][badge-BEbadge-start badge-BEbadge-end] [badge-ZERObadge-start badge-ZERObadge-end]
  • Fysieke coating – geen chemicaliën, alleen puur anti-aanbakvermogen

  • Nano-getextureerd staal ontworpen voor maximale duurzaamheid

  • Krasbestendig oppervlak geschikt voor stevig keukengerei en dagelijks gebruik

  • 5 jaar garantie voor consistente, duurzame kwaliteit

  • Geschikt voor alle fornuizen, inclusief inductie en gas

  • Hittebestendig in de oven en vaatwasmachinebestendig

  • 100% vrij van PFAS, PTFE en kwetsbare coatings

DE ANTI-AANBAKPAN HERUITGEVONDEN – MET EEN NATUURLIJKE, CHEMIEVRIJE COATING

Niet alle anti-aanbakpannen zijn hetzelfde. Sommige gebruiken chemische coatings zoals PTFE of keramiek om te voorkomen dat voedsel aan de pan blijft plakken. Deze lagen worden bovenop de pan aangebracht en kunnen slijten door tijd, hitte of schoonmaak. De ONYX COOKWARE™ ZERO potten en pannen hanteren een compleet andere aanpak. In plaats van een aangebrachte coating, hebben ze een natuurlijke, fysieke coating die direct in het staal is gecreëerd.

Dit wordt gedaan door middel van gecontroleerde stikstofhittebehandeling, een proces dat het staal versterkt en een fijne, duurzame textuur op het oppervlak vormt. Het resultaat is wat wij nano-texturering noemen; een fijn, bijna onzichtbaar patroon dat voorzichtig vermindert hoeveel contact uw voedsel met de pan heeft. Dit geeft de pan zijn natuurlijke anti-aanbak eigenschappen - zonder toevoeging van chemicaliën.

Omdat de coating een onderdeel is van het staal zelf, is er niets dat kan slijten. Je kunt ruwe metalen gereedschappen gebruiken, het schoonvegen en schrobben, en op elke gewenste temperatuur koken, ook in de oven. Het oppervlak blijft sterk, betrouwbaar en klaar voor dagelijks gebruik. Dit is antiaanbak koken zonder compromissen. Dit is ZERO. Een serie pannen en potten ontworpen om moeiteloze antiaanbak prestaties te leveren – met ZERO kwetsbare coating, ZERO krassen en ZERO compromissen.

GEBOUWD VOOR PRESTATIE – VAN BINNEN EN BUITEN

Er is meer aan een pan dan alleen het oppervlak. De ONYX COOKWARE™ ZERO-serie is gemaakt met een stevige drielaagse constructie, waarbij elke laag zijn eigen taak heeft en ze allemaal samenwerken om je maximale prestaties te bieden.

De buitenlaag is van roestvrij staal. Dit geeft de pan zijn sterkte en stabiliteit. Het maakt de pan ook compatibel met elk type fornuis – van gas en elektrisch tot inductie. Je hoeft er niet over na te denken, het werkt gewoon.

Aan de binnenkant zit een dikke laag aluminium. Aluminium is uitstekend in het geleiden van warmte. Het zorgt ervoor dat je pan snel en gelijkmatig opwarmt, zodat je geen koude plekken of verbrande randen krijgt. Of je nu aan het bakken, sauteren, of sudderen bent, alles krijgt de juiste hoeveelheid warmte.

Dan is er het kookoppervlak zelf - de bovenste laag die daadwerkelijk contact maakt met je eten. Dit is waar de magie gebeurt.

In plaats van een chemische coating maakt de ZERO-serie gebruik van een uniek stikstofwarmtebehandelingsproces, met titanium geïntegreerd in het oppervlak. Dit houdt in dat het roestvrij staal wordt blootgesteld aan hoge temperaturen in een gecontroleerde stikstofomgeving. De hitte transformeert de buitenste laag van het staal en creëert een sterker oppervlak met een fijne, bijna onzichtbare textuur.

Deze textuur is natuurlijk wat de pan zijn antiaanbak eigenschappen geeft. Het vermindert de hoeveelheid direct contact dat je voedsel met het oppervlak heeft, zodat het gemakkelijk loslaat en sneller schoonmaakt. En omdat deze laag deel uitmaakt van het staal zelf, is er niets dat kan slijten of beschadigen. Alle drie lagen – het staal, het aluminium en het nano-getextureerde oppervlak, zijn permanent samengesmolten. Niet gelijmd, niet gecoat, niet geperst. Gewoon solide metaaltechniek gemaakt voor dagelijks koken met maximale prestaties.

Het is gemaakt om dag in, dag uit, jaar na jaar te presteren zonder speciale zorg of beperkingen. Gewoon koken, verwarmen en schoonmaken. Zo gemakkelijk is het.

VEILIG TE GEBRUIKEN MET METALEN GEREEDSCHAP

De oppervlakken van de ZERO-serie pannen en kookpannen zijn gemaakt van gehard roestvrij staal, niet van zachte of gecoate materialen. Dat betekent dat ze bestand zijn tegen metalen keukengerei - of je nu een stalen spatel, vork of garde gebruikt, het oppervlak zal niet beschadigd raken.

Er is geen noodzaak om over te schakelen naar speciale siliconen of houten gereedschappen. Je kunt koken zoals je normaal doet, met de gereedschappen die je al hebt. Het oppervlak is slijtvast en ontworpen voor herhaald dagelijks gebruik, zelfs bij direct contact met metaal.

OVENBESTENDIG BIJ ALLE TEMPERATUREN

De ZERO pannen en kookpannen zijn volledig uit metaal gemaakt. Er zijn geen plastic handvatten, rubberen coatings of synthetische materialen die de hittebestendigheid beperken. Daardoor is het kookgerei volledig veilig om in de oven te gebruiken – zelfs bij zeer hoge temperaturen.

Of je nu aan het braden bent, een gerecht onder de grill afmaakt, of maaltijden bakt die een hete oven vereisen, de ZERO-serie zorgt ervoor dat je het op de gewenste temperatuur kunt gebruiken. Pas gewoon de temperatuur van de oven aan naar wat je normaal zou gebruiken, en de ZERO kookpannen en pannen zullen alles aankunnen.

VAATWASMACHINEBESTENDIG EN GEMAKKELIJK SCHOON TE MAKEN

Het schoonmaken van de ONYX COOKWARE™ ZERO-serie is eenvoudig. Zowel onze kookpannen als pannen zijn volledig vaatwasmachinebestendig en kunnen ook met de hand worden gereinigd met gewone hulpmiddelen - inclusief staalwol of harde sponzen. Vanwege de oppervlakteconstructie hoeft u zich geen zorgen te maken over beschadiging tijdens het schoonmaken.

U hoeft geen speciale instructies te volgen of bepaalde schoonmaakgereedschappen te vermijden. Na het koken kunt u het op dezelfde manier schoonmaken als u normaal zou doen. Het is ontworpen om zo onderhoudsarm mogelijk te zijn en klaar voor dagelijks gebruik.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73611688702

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Leyland Cypress
Louisville, US
★★★★★ 3
Get the right wire guage
Size: 1 Count (Pack of 1), Pattern Name: Banana Plugs
I rate the banana plugs themselves 4 stars. They are everything I expected and work as advertised. It's the experience of assembly that I rate three stars. The way these work is -- you strip off the outer insullation of your wire and separate the two leads (positive and negative). Then you strip some length of insulation off the end of one of your leads, you unscrew the banana plug so that it separates into its respective base (lower) and contact (upper) halves, you slip the wire up through the base, you flare the copper strands of the wire and fold the individual strands over the very top of the base (about 1/16 of an inch) (taking care not to extend the strands over the threaded barrel of the base), then you screw the upper contact onto the lower base and voila, banana plug / wire assembly. It's not as complicated as it sounds. Go to the Monoprice website and watch their excellent instructional video. Here's the thing though. While the assembly is not complicated, it is tricky, and if you don't get your proportions right the first or second or third time, you'll have to do it over. Fist of all, if your wire guage is relatively thin, like my 16-guage speaker wire, you'll find that the entire wire, insullation and all, will slip right through the base of the plug without butting up against the bottom of the base. If this is the case, then the wire is left to sort of flop around inside the plug and that has a kind of unfinished, amateur look and feel to it, whereas if the wire butts up against the bottom of the base, it has a solid, one-piece professional look. So, to my mind, there's a sweet-spot for wire guage that works best with this plug -- not too thin and not too thick. And since Monoprice has debunked the thicker-is-better myth (the quality of the copper is the real determinant), then you should feel free to get the wire guage that fits the plug. Next -- and here's where it gets tricky -- once your copper extends beyond the top of the base, you'll need to limit this extension to about a sixteenth (no greatrer than a fourth) of an inch. Then you very delicately flare out the individual strands, in a 360- degree arc, and fold the strands over the top of the base. This takes a fair degree of manual dexterity, especially if the wire is "floating" inside the base and its travel is not stopped where the insullation meets the base. You'll have to hold the wire and base steady in the fingers of one hand, then flare out the wire strands with either your fingers or a suitable object (the working end of a ball-point pen worked for me) with the other hand. This one-sixteenth measure is important. If you extend wire strands beyond the top and over the threads of the base, you'll find that screwing the contact end onto the base is impossible and you'll need to start over. One or two strands is OK and almost unavoidable. In that case the screwing will catch but if you take a pair of pliers to it you can muscle through. By the way, you can avoid the whole mess by getting the open-screw type, which I'm sure will work just as well without any of the hassle of assembly. Like anything else, if you do it a few times to make the mistakes and learn the tricks, then it will become second nature, and if you've already done that, then my review might seem overly fussy. In that case feel free to leave comments to help other readers.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2012
J
Verified Purchase
JBDoge
Chelsea, US
★★★★★ 5
Wish they came with instructions...
They are cheap and work great. They plug right into my Pioneer vsx521 receiver and my Paradigm Atom monitor speakers. I wish they came with instructions, because it took me about 10 minutes to realize the bottom part unscrews in addition to the top part. Here are my instructions for installation: 1) Unscrew the bottom part of this connector (the thin metal underneath the red/black ring). 2) Make sure the Banana Plug (which may be loosely screwed into the top part of the connector) is fully tightened down 3) Strip your wire tips to 3/8 of an inch (or just slightly under) 4) Run the first newly stripped wire end through the bottom part you removed in step 1, such that the stripped end of the wire is entering through the flat end and exiting through the smaller threaded end. 5) Leave about 1/8 to 3/16 of an inch of stripped wire hanging past the exit hole. 6) As evenly spaced as possible, bend the over-hanging wire strands over the exit hole (all around it, like a hat). If done properly, the wire should not fall out if you give it a VERY GENTLE tug. 7) Screw the top metal part (with the actual banana plug) back onto the bottom part. It may be difficult if your stripped wire is hanging too low. I've used a pair of pliers to grip the bottom part of the connector while I twist the banana plug side with my hand. If done correctly, you should be able to put a lot of tension between the wire and connector without removing/damaging it. UPDATE: I just recently helped my dad install his 5.1 system without these... it sucked... This item (5 pairs of them in this case) and a good wire stripper can save you alot of pain (both physical and mental). The connectors on the back of his receiver are the kind where bare wire comes in from the side and then the connectors screw down (with a banana plug hole in the center which is where this product would come into play). I felt like a surgeon trying to get a bare wire end into the little slot, and then holding it there while I tighten the connector which is almost impossible since they are so close together... GET THESE!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2012
R
Verified Purchase
R. Jackson
Massapequa, US
★★★★★ 1
'Monoprice' = Worst stereo banana plugs on T-H-E market.
Size: 5 Pack, Pattern Name: Banana Plugs
The absolute WORST in stereo banana plugs - HANDS DOWN. After installing stereos and components for over 30 years, I'd say I'm experienced. These banana plugs fail at EVERY part of the design. Allow me to explain... 1) Starting with the tips, they are loose off the bat and fit LOOSELY in either the stereo input studs or speaker input studs by their 'girth'. They do not firmly seat in any plug and for this setup, I'm using a nearly $2K setup all together. They 'rock' back and forth (when inserted) and thus create a non-permanent connection, again, seriously making these utter junk. I've seen some items you can get by with over the years, but these aren't even rock bottom. They are unusable! 2) Next, the banana plugs themselves comes as three pieces. No non loosening o-ring seal but a plastic colored want-to-be imitation for positive and negative notation. Why do these stupid things come in three pieces? - I simply can't tell you why. I do know they serve no specific piece to solving the puzzle of installation so why do they come in three pieces...? My speculation is they are cheap china knockoffs. 3) The 'way' in which you normally install the trimmed wiring internally with the 'two-piece' design permits you to firmly CRIMP and hold the unsheathed wiring; but these do not. The overlap/overlay of the exposed wiring can only be about 2/16's of an inch thus not much to create a proper connection with. This single fact eliminates these plugs as even worthwhile component add ons; period. If you can't achieve a good ground/wiring connection, these are a defeated purpose... 4) Because of the design of these, they have no room to crimp and screw on the cable so your forced to nearly break your fingers in an attempt to get the unsheathed wire to overlay the internal threading and twist them on with all your might. This in effect breaks nearly every wire thread internally and then they breaks off inside. Absolute garbage. These are total pieces of non-quality junk that did nothing but makes me waste 30 minutes on attempting to get them securely on and another 25 to locate my Amazon account, find this product in my order and ALARM anyone else from making the same mistake I made. Now, I find out I can't even get a return on these. Thanks Amazon. Thank you third party retailer. You just made me a very dissatisfied decade long customer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 17, 2016
A
Verified Purchase
Amazon Customer
Massapequa, US
★★★★★ 5
Nice quality
Had to return due to our mistake but the mechanic said it was good quality. Ordered the correct size and worked great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2025
K
Verified Purchase
katelyn traut
Grantham, US
★★★★★ 5
Perfect fit
Worked great for a 1965 mercury thunderbolt 150hp
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2025

recommand products