Pay in installments of $6.18 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Keraben, Future - G8V42002 - Gris, Matt, 60x60cm, 10.00mm, Rett.De Future tegels van Keraben zijn de ideale keuze om een vleugje elegantie en stijl aan uw kamers te geven. Dankzij de anti slip, lappato, mat oppervlak, deze tegel met metaaleffect geeft een luxueuze en verfijnde uitstraling en past zich perfect aan elk type ontwerp aan. Met een selectie verfijnde kleuren, waaronder beige, blanco, cobre, grafito , gris, negro, oxido, the Future tegel is verkrijgbaar in verschillende formaten, zoals 25x70cm, 50x50cm,
De Future tegels van Keraben zijn de ideale keuze om een vleugje elegantie en stijl aan uw kamers te geven.Dankzij de anti -slip, lappato, mat oppervlak, deze tegel met metaaleffect geeft een luxueuze en verfijnde uitstraling en past zich perfect aan elk type ontwerp aan.
Met een selectie verfijnde kleuren, waaronder beige, blanco, cobre, grafito , gris, negro, oxido, the Future tegel is verkrijgbaar in verschillende formaten, zoals 25x70cm, 50x50cm, 30x90cm, 60x60cm, 50x100cm, 75x75cm, en biedt flexibiliteit en veelzijdigheid voor het creëren van uw ruimtes.
Dankzij de dikte van 10,00 mm garanderen de Future tegels weerstand en duurzaamheid in de loop van de tijd, waardoor hun schoonheid intact blijft, zelfs na meerdere jaren gebruik.
Gemaakt met hoogwaardige materialen en met aandacht voor elk detail, zijn de Future tegels van Keraben de perfecte keuze voor wie op zoek is naar een oplossing van superieure klasse.
Kies de tijdloze schoonheid en elegantie van Future tegels van Keraben om uw ruimtes te transformeren in echte meesterwerken.
| Merk | Keraben |
| Collectie | Toekomstige |
| Categorie | Tegels |
| Kleur | Beige, Blanco, Cobre, Grafito, Gris, Negro, Oxido |
| Oppervlakte | Antislip, Lappato, Mat |
| Afmetingen | 25x70cm, 50x50cm, 30x90cm, 60x60cm, 50x100cm, 75x75cm |
| Dikte | 10,00 mm |
| Gerectificeerd | Gerectificeerd |
| Effect | Metaal |
| Gebruik | Binnen, Muur |
| Materiaal | Porcellanato, Witte klei |
| Antislipbescherming | R10 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 13 reviews
Sort
Product Reviews
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
recommand products
3-FASE RAILARMATUUR WIT GU10 MET VERSTELBARE LENS. MDRLED®
24.00
Professionele 3-Fase Railspot Wit 28W | CRI95 | LED Railverlichting
89.00
LED Dimmer 500W – Universele LED Dimmer – Fase Af- en Aansnijding – Stil Dimbereik 0–500W
27.00
® COB LEDSTRIP 24V IP20 5M 14W/M RGB MDRLED®
54.00
3-FASE RAILSPOT 15W WIT DIMBAAR 2700K-4000K MDRLED
58.00