SKU: 91904994382

Continenta Snijplank met RVS Lade - Duracore - 48 x 33 cm

$89.95 $99.95
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $24.99 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 5 - Oct 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Continenta Snijplank met RVS Lade - Duracore - 48 x 33 cmSnijden, schrapen, klaar de Continenta Duracore snijplank doet het gewoon beter Je kent het moment: je hebt net een berg groenten gesneden, kruiden gehakt en vlees geportioneerd en dan begint de dans. Kommetje pakken, alles erin schrapen, kommetje neerzetten, handen afvegen, verder. Keer op keer. De Continenta Snijplank met RVS Lade maakt korte metten met die omweg. Snijden gaat rechtstreeks in de lade. Punt. Dit is niet zomaar een snijplank. Dit is

Snijden, schrapen, klaar - de Continenta Duracore snijplank doet het gewoon beter

Je kent het moment: je hebt net een berg groenten gesneden, kruiden gehakt en vlees geportioneerd - en dan begint de dans. Kommetje pakken, alles erin schrapen, kommetje neerzetten, handen afvegen, verder. Keer op keer. De Continenta Snijplank met RVS Lade maakt korte metten met die omweg. Snijden gaat rechtstreeks in de lade. Punt.

Dit is niet zomaar een snijplank. Dit is een slimme keukenoplossing die jouw werkritme versnelt, je aanrecht overzichtelijk houdt en die je - dankzij het innovatieve Duracore-materiaal - jarenlang meegaat. Zwart, strak, professioneel. Alsof je eigen keuken ineens een beetje meer op een sterrenrestaurant begint te lijken.

Waarom deze snijplank anders is dan de rest

  • Inclusief RVS gastronoombak - Gesneden ingrediënten schuif je direct de lade in. Geen extra schaaltjes, geen gemorste stukjes ui op je aanrecht.
  • Duracore - gerecycled en keihard - Dit materiaal is gemaakt van gerecyclede grondstoffen en is verrassend sterk, hygiënisch en messenvrindelijk. Je messen blijven scherper, de plank blijft vlak.
  • Ruim snijoppervlak van 48 x 32,5 cm - Genoeg ruimte om een hele pompoen te halveren, een kip op te delen of gewoon je dagelijkse groenten te snijden zonder alles steeds te moeten verschuiven.
  • Hittebestendig tot 180 graden - Hete pan even neerzetten? Dat kan. Deze plank trekt het zonder morren.
  • Vaatwasserbestendig - Na het koken wil je genieten, niet schrobben. Plank in de vaatwasser, klaar.
  • 2 jaar garantie - Continenta staat voor kwaliteit die zichzelf bewijst. En die garantie laten ze dat ook gewoon vastleggen.

Duracore: het materiaal dat je keuken serieus neemt

Veel snijplanken zijn gemaakt van hout of standaard kunststof. Hout vraagt onderhoud, trekt vocht en scheurt na verloop van tijd. Goedkoop kunststof krast snel en is een broeinest voor bacterien. Duracore pakt dat anders aan. Dit gerecyclede composietmateriaal is hard, niet-poreus en uitzonderlijk hygiënisch. Bacterien hebben geen kans: er zijn geen spleten, barsten of vezels waar ze zich kunnen nestelen. En jij hebt gewoon een plank die er na honderd gebruiksbeurten nog even goed uitziet als op dag een.

Bijkomend voordeel: Duracore is vriendelijk voor je messen. Het oppervlak is stevig maar geeft net genoeg mee om de snijkant van je mes te sparen. Dat proef je - figuurlijk dan - terug in de precisie waarmee je snijdt. Dunne plakjes, fijne brunoise, perfecte julienne: de plank werkt met je mee.

En dan is er nog het milieuverhaal. Gerecycled materiaal, lang leven, minder weggooien. Slim kopen is ook slim voor de planeet.

De RVS lade: klein detail, groot verschil

De uitschuifbare RVS gastronoombak onder de snijplank is het geheim van dit product. In professionele keukens is de gastronoomschaal een begrip: standaard formaat, stapelbaar, makkelijk te reinigen. Continenta brengt diezelfde professionaliteit naar jouw keuken thuis.

Stel je voor: je maakt een uitgebreide wok. Ui, knoflook, paprika, courgette, wortel - alles vraagt om zijn eigen snijmoment. Met de RVS lade schuif je iedere portie weg zodra hij klaar is, terwijl je doorgaat met het volgende. Je aanrecht blijft vrij. Je hoofd blijft helder. En als alles gesneden is, gaat de lade rechtstreeks naar de pan. Geen overbodige stappen, geen onnodige verspilling van tijd of energie.

De RVS bak is ook los te reinigen - in de vaatwasser of even afspoelen. Roestvrij staal neemt geen geuren of smaken aan. Na het bereiden van knoflook en vis ruikt je volgende snijsessie gewoon naar... niets. Precies zoals het hoort.

💡 Cookinglife Tip: Gebruik de RVS lade ook om je mise-en-place te organiseren. Vul hem alvast met alle gesneden ingrediënten voordat je begint met koken - zo werk je stressvrij en efficiënt, net als een echte keukenprofessional. Koken wordt een stuk rustiger als alles al klaarstaat.

Strak design dat ook nog eens werkt

De Continenta Duracore snijplank is mat zwart. Niet grijs, niet beige, maar echt zwart - strak en tijdloos. Hij past op elk aanrecht, past bij elk keukenblok en ziet er ook uit als iets dat je bewust hebt gekozen. Dat is het subtiele verschil tussen een keuken die functioneel is en een keuken die ook aanvoelt als jouw plek.

Het formaat van 48 x 32,5 cm is groot genoeg voor serieuze klusjes, maar compact genoeg om hem in je kast te bewaren als hij niet in gebruik is. Praktisch en veelzijdig - twee eigenschappen die je altijd wilt in keukengerei dat je dagelijks gebruikt.

Specificaties

  • Merk: Continenta
  • Collectie: Duracore
  • Afmeting: 48 cm x 32,5 cm
  • Materiaal: Duracore (gerecycled), RVS
  • Kleur: Zwart
  • Hittebestendig tot: 180 graden Celsius
  • Vaatwasserbestendig: Ja
  • Garantie: 2 jaar

In de verpakking

  • 1 x Continenta Snijplank Duracore (48 x 32,5 cm)
  • 1 x RVS gastronoombak (uitschuifbaar)

Klaar om je voorbereiding te stroomlijnen en meer plezier te halen uit iedere kooksessie? Bestel de Continenta Snijplank met RVS Lade vandaag nog en ontdek wat het verschil is als je gereedschap echt voor je werkt.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 91904994382

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Robert O. Forsyth Jr.
Louisville, US
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk! Built cheaply. Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper. If you have a piece of paper that has a fold in it, forget about it. That will never feed through. I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides. It took 23 minutes to get done. Should not have taken 2. The last time I used it same issues but less sheets. The paper is SO TIGHT in the feed section it is hitting BOTH walls. You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly. While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!) Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds. Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going). Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit! So much for a 5 year Warranty. Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022. Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm . As they pass you along the ranks you have to repeat EVERYTHING all over again. As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out. Just PLOP! Other issues while I am at it, the Picture quality is "OK" nothing special. I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff. The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's). Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it. I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC. I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.) The panel function is anything but user friendly. Firmware Updates, if not done, will prevent usage until done. You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined. Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded. The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges. The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP? But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low. They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon. You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
M
Verified Purchase
Michael A. Adkins
Pawtucket, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
West Palm Beach, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Natrona Heights, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
Houston, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026

recommand products

Nivea Cellular luminous 630 post-acne vlekken serum 30.00 Milliliter
43.99
Gnome Hollow - NL
62.00
Faraway (geel)
26.00
OYOY - Linu Schort Hoog
60.95
Page Compleet schoon 32.00 Rol
12.49