Pay in installments of $5.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 25 - Aug 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing FilamentAmbrosia Filament's line of PLA is part of our Low Calorie line of filament, no additives just butter smooth printing. Feed your Printer the Filament of the Gods. Derived from 100% Virgin Grade A Non Toxic pellets. Manufactured to a tighter than standard tolerance (+ 0. 03mm) you'll experience consistent extrusion throughout the spool. PLA is most hobbyist makers material of choice for 3D printing. A bio degradable plastic derived from renewable
Ambrosia Filament's line of PLA is part of our Low Calorie line of filament, no additives just butter smooth printing.
Feed your Printer the Filament of the Gods.
Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.
PLA is most hobbyist makers material of choice for 3D printing. A bio-degradable plastic derived from renewable resources (such as corn... I know we say our filament is low calorie, but don't eat it - your printer is the only machine that should injest our filament!) it is one of the easiest materials to print with, with a relatively low melting point and is able to be printed without a heated bed. Printing with PLA is typically odorless, or when it smells gives of a 'sweet' aroma, and emits less harmful fumes than some other 3D printing materials, making it a safer option for enclosed spaces without proper ventilation.
- Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
- Derived from 100% Virgin (Grade-A) non-toxic pellets
- Diameter: 1.75mm (+/-0.03mm)
- Filament Net Weight: 1KG
- Spool Weight:
The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).
Check out our other lines of Ambrosia Filament!
| ASA | ASA-CF | ASA Sparkle | ASA Dolos | ABS+ | PETG | PLA |
| PC-ABS | PC-CF | TPU | ABS Matte | ASA-GF | PLA-SILK | |
Ambrosia Filament's Recommended Print Settings for our PLA filament:
| Attribute | Accepted Value(s) [Our Recommended Value] |
| Extruder Temperature | 190-220 Degrees Celsius [210] |
| Heated Bed | 0-65C Degrees Celsius [60] |
| Build Surface | PEI, Glass, Painters Tape, Buildtak, or similar surface [Smooth PEI] |
| Cooling Fan | 50-100% range varies by cooling capabilities |
| Environmental Temperatures | 15-40C [25C] |
| Soluble Support Materials | PVA, BVOH |
Technical Specifications for our PLA Filament:
| Physical Properties | Test Methodology | Values |
| Density | ISO1183 | 1.25-1.26 g/cm^3 |
| Melt Flow Rate (250C/2.16KG) | ISO 1133 | 4-8 g/10min |
| Mechanical Properties | Test Methodology | Values |
| Tensile Strength | ISO 527 | 45-49 Mpa |
| Elongation at break | ISO 527 | 13-15.5% |
| Flexural Modulus | ISO 527 | 1000-1100 Mpa |
| Flexural Strength | ISO 178 | 69-75 Mpa |
| Impact Strength | ISO 180 | 4.5-5 KJ/m^2 |
| Thermal Dynamic Properties | Test Methodology | Values |
| HDT@ 0.455 MPa(66 psi) | ISO 75 | 53C |
| Continuous Use Temperature | IEC 60216 | 50C |
Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.
Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 11 reviews
Sort
Product Reviews
★★★★★ 5
Nice, sturdy, and supportive and easy to set up for my dual 27" monitors!
Size: Dual, Style: Free-Standing
Nice, sturdy, and supportive and easy to set up for my dual 27" monitors!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Easily supports a pair of 26" displays
Size: Dual, Style: Free-Standing
I have no complaints with this stand. It is not as nice as the Inland brand sold at MicroCenter, but it does its job. It beats the price of the MicroCenter one, thats for sure.
It comes with all the hardware you might need, even long screws and bushings if you have a display that needs them.
Assembly was quick. It comes mostly assembled anyway. You have to put the bottom on the post then attach the assembled arms to the post.
Setting up can be a challenge but with help, its easy. After mounting the bracket on the back of the displays, you just slide them into the receiver on the arms.
Once mounted, adjusting the position is simple, but can take a while as there are several joints which can be positioned to angle the displays as you like.
The cord clips do an OK job of cord management, but the clips are not as good as the Inland ones. They do the job, but not as durable. I broke the one that goes on the post, but I tried getting it to hold a wad of wire. My fault.
I recommend this stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
★★★★★ 5
It's simple, it works, & its price makes for a good deal
Size: Single, Style: Free-Standing
I needed a stand for a 27" VIZIO TV that had been wall-mounted for a few years, & (?) the original stand must've got the toss long ago... It's hard to say...
I found this stand on Amazon priced right, plus it had a coupon attached to the listing. I scrolled down & I saw a "newer model" of the same product was available, so I was initially hesitant.
But, looking at the product pictures, reading the description, & scanning through some of the reviews, then the same with the "newer model" — the only difference I could see was mostly aesthetic (it also appears to have a desk mount included, which wouldn't have worked for me regardless of its purpose—either for conversion to a desk stand-off mount, or to further secure the stand....?)
Eventually, I just thought "....it's a stand with a VESA mount; how do you **** that up...?" And I really couldn't think of anything...even if the VESA bracket was milled not to spec (it is milled to spec), I could
have still made it work....(?) So, I made the purchase, received it, & 9-10 screws later, the TV had a stand. & I'm guessing a much more versatile stand than the original. The bracket that attaches the stand to the VESA mount can lower or raise the TV quite a bit. Even in it's highest position, it's still retains its sturdiness & remains stable. The baseplate has a decent amount of weight, and its overall design is well balanced to favor stability (to a tolerance; e.g., an old CRT monitor just isn't going to work).
The stand is literally 4 basic pieces—the VESA bracket, an articulating bracket, a metal tube, & a metal baseplate. If you have a standard phillips screwdriver, then the stand is easy to assemble. If you have any experience with TV mounts, or TV stands, then it assembles in less than 15 minutes.
Given what you get for the price, the ease of assembly, the added versatility, if you need a stand for a screen within the manufacturer's specific tolerances, then I would absolutely recommend this stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 19, 2021
★★★★★ 5
Decent Monitor Stand with Some Assembly Required
Size: Single, Style: Free-Standing
This monitor stand works pretty well and is a good value for the price. It’s sturdy and adjustable, which makes it perfect for a variety of monitors, including my 32-inch curved Samsung. The assembly is straightforward if you have a Phillips screwdriver and something to tighten bolts, like a wrench. It’s solid once it’s put together and holds my monitor securely. The phone holder could use some improvement. It doesn't adjust to face me directly, which is a bit annoying. The stand itself is great for saving desk space and providing better ergonomics, but it can be a bit of a hassle to assemble if you’re not handy with tools. Overall, a good buy if you need a reliable monitor stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2024
★★★★★ 3
Works, Good product, but wouldn't recommend for specifically 3 27inch screens.
Size: Triple, Style: Free-Standing
I purchased this stand to have 3 27inch 2560x1440 monitors, with the side ones angled towards me in a typical 3-monitor setup often seen being used by racing or aviation simulator guys. This stand's arms for the two side monitors are not long enough to have said monitors angled more than 5 to 8 degrees meaning they are forced to be completely linear which is incredibly awkward to try to use because you can barely see or use the screen space on the far edges.
𝐖𝐢𝐭𝐡 𝐭𝐡𝐞𝐬𝐞 𝐬𝐢𝐳𝐞 𝐬𝐜𝐫𝐞𝐞𝐧𝐬, 𝐭𝐡𝐞 𝐨𝐧𝐥𝐲 𝐰𝐚𝐲 𝐭𝐨 𝐡𝐚𝐯𝐞 𝐞𝐯𝐞𝐧 𝐨𝐧𝐞 𝐚𝐭 𝐚𝐧 𝐚𝐝𝐞𝐪𝐮𝐚𝐭𝐞 𝐚𝐧𝐠𝐥𝐞 𝐟𝐨𝐫𝐜𝐞𝐬 𝐭𝐡𝐞 𝐨𝐭𝐡𝐞𝐫 𝐦𝐨𝐧𝐢𝐭𝐨𝐫 𝐭𝐨 𝐛𝐞 𝐢𝐧 𝐩𝐨𝐫𝐭𝐫𝐚𝐢𝐭 𝐦𝐨𝐝𝐞, 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐦𝐞𝐬𝐬𝐢𝐧𝐠 𝐮𝐩 𝐭𝐡𝐞 𝐰𝐡𝐨𝐥𝐞 𝐩𝐨𝐢𝐧𝐭 𝐨𝐟 𝐛𝐮𝐲𝐢𝐧𝐠 𝐭𝐡𝐢𝐬. The product description should not say it can hold 3 27 inch screens because the amount of struggling I had to do to get it to be acceptable was ridiculous.
The stand is... not heavy enough to safely hold monitors of this size either, and additional weight was required ( 2 10lb dumbbells in my case ) configuring the height of your monitors with this stand can be dangerous as well as they could fall down the central post so you have to be extremely careful, but, it is pretty easy other than that.
It is a great option if you don't have a desk with an edge for typical stands ( I don't. ) You can place the stand anywhere, and you don't have to drill through your desk if you really don't want to. The cable clips are a very nice included bonus, and they sent me a replacement without any hassle when I totally effed up my first attempt at setup.
But, I would have shopped harder and got something else if I knew all this prior all the same. Maybe even bought a gigantic curved screen instead.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2025
recommand products
Eibach Pro-Spacer 20mm Front Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 05-14 Ford Mustang
120.50
Eibach Pro-Spacer System 15mm Black Spacer - 2015 Ford Mustang Ecoboost / V6 / GT
175.99
Justeer in Nosta Prime 2 2/5x14 1/2
10.00
Extang 19-21 Dodge RamBox w/Cargo Management System (5ft 7in) Trifecta e-Series
180.00
Ugo Card Holder Clip
Metallic Silver
Metallic Silver
35.00