Tycon Systems 48V 240W DIN Rail Industrial Power Supply [PSDIN-48-240W]

Tycon Systems 48V 240W DIN Rail Industrial Power Supply [PSDIN-48-240W]Tycon Power PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of 40C to +70C. There are two models to supply 120W or 240W. The input is 90 to 264VAC auto ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. Two 240W supplies operating in parallel will provide 480W total

Tycon Power PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of -40°C to +70°C. There are two models to supply 120W or 240W. The input is 90 to 264VAC auto-ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. Two 240W supplies operating in parallel will provide 480W total power. There is an alarm output to provide a dry contact closure to trigger an alarm if the DC output fails, like during a grid power failure. The relay is closed when DC output is normal and open when DC output is in fault condition due to overload or safety shutdown.

• High Power and rugged design
• Short Circuit, Over-Voltage, Over-current Protection
• 90-264VAC Auto Ranging Input
• 47~56VDC Adjustable Output
• -40°C to +70°C Operating Temperature
• Supports Parallel Operation
• Dry Contact DC Alarm

• Powering PoE Switches
• IP Phone and Security Camera Systems
• Telecommunications

• Input Operating Range: 90-264VAC ; 47-63Hz
• Input In-rush Current: 35A Max
• Input Current: 4.4A @ 115VAC ; 2.20A @ 230VAC
• Output Voltage: 47~ 56VDC (adjustable)
• Cont. Load Current: 5A
• Maximum Output Power: 240W
• Peak Power (10sec @ 220VAC): 360W
• Line Regulation: ± 0.5%
• Load Regulation: ± 1%
• Voltage Overshoot: <5%
• Ripple / Noise: 100mV Peak
• Efficiency: 90% Minimum
• Dielectric Strength: 1500V rms , 1 min, 10mA Max
• Insulation Resistance: 10M Ohms
• Protection: Short Circuit, Over-Voltage, Over-Current, Over Power
• Alarm Output (“DC” and “OK”): 1A @ 30VDC, 0.5A @ 125VAC. DC OK = Closed, DC Fault = Open
• Safety Standards: GB4943 / EN60950-1
• EMI Standards: FCC PART 15 CLASS B, EN55022, EN55024
• Harmonic Current: EN61000-3-2 Class D
• EMS: EN61000-4-x Level 3&4
• Operating Temp: -40°C to 70°C (-40°F to 158°F)
• Operating Humidity: 5% to 95% non- condensing
• Storage Temp: -40°C to 85°C (-40°F to 185°F)
• MTBF: 200,000hrs
• Altitude: 2000m (6562ft)
• Vibration: 10-500Hz 2G 10min Sweep, 20G Surge 11ms
• Case Size: 135 x 121 x 45mm (5.3 x 4.8 x 1.8”)
• Weight: 0.77 Kg (1.7Lb)
• Warranty: 3 Years

(1) User Manual