SKU: 29125348232

BEVRLink 8 Channel Relay V1 5V

$20.25 $22.50
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $5.62 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 3 - Oct 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

BEVRLink 8 Channel Relay V1 5VOverview The BEVRLink Relay 8 ch V1 5V is a versatile and reliable relay board designed for use with the BEVRLink system or directly with Raspberry Pi, Rock or other microcontrollers. With 8 channels and spring terminals for easy connection, this relay board is perfect for quickly setting up test and automation systems. The board also features LED indicators for each relay, making it easy to monitor the status of your devices. One of the main

Overview

The BEVRLink Relay 8 ch V1 5V is a versatile and reliable relay board designed for use with the BEVRLink system or directly with Raspberry Pi, Rock or other microcontrollers. With 8 channels and spring terminals for easy connection, this relay board is perfect for quickly setting up test and automation systems. The board also features LED indicators for each relay, making it easy to monitor the status of your devices.

One of the main advantages of the BEVRLink Relay 8 ch V1 5V is its compatibility with the BEVRLink Manager boards. These boards are designed to quickly connect and address the pins between, for example, a Raspberry Pi 4 and the relay board. This means that you can easily connect your devices and start controlling them with your Raspberry Pi.

The relays on the BEVRLink Relay 8 ch V1 5V are of industrial quality and are designed in Sweden. They are capable of handling loads up to 5A 250VAC or 5A 30VDC, making them suitable for a wide range of applications. Additionally, the board features a 5V output connector that can be used to power the next board.

 



8 Relay module, with spring terminals and LED indicators for each relay. It powers other modules and manager boards connected through the easy to use BERVLink connector. You only have to connect the boards, power and then put in your controlled devices to the relays.  A 5V I2C bus is used for the communication between the boards and the manager board that can be any SBC or microcontroller like Raspberry PI, PICO, ESP32 etc. All our Manager boards have 3.3V to 5V level shifter for the i2c logic so that managers like Raspberry Pi could be used. A modular design enables you to do your own casing or use our BEVRLink case with support for DIN rail mounting.

The 5V I2C bus is open to be used with your own I2C product and other brands using standard Dupont 2.54 mm wires. Making the possibilities endless to what you could control and automate with this system.

Features

  • 5V/4A DC Jack power input Size: 5.5x2.1mm
  • Relay coil supplied directly from power input, 15mA used by each relay active.
  • 5V output connector to be used to power the next board or use to power 5V loads connected to the relays.
  • Manager and Expansion connector
  • High-quality relays load up to 5A 250VAC or 5A 30VDC
  • Standard rail mount bottom case   
  • Onboard LEDs for indicating relays status
  • Power Good Status LED, if the board doesn’t have enough voltage (4.7V) due to heavy load it will turn off the LED.
  • Selectable Address 
  • Plug and play, no cables needed to connect to a Raspberry Pi
  • Good for quickly setting up test and automation systems
  • 9V under voltage shutdown to protect the relays

Specifications

  • Power supply voltage: 5V/4A
  • Expansion and Manager connector 5V/3A power 
  • Relay channels: 8-ch
  • Contact form: SPDT-NO, NC
  • Connector: Spring clamp terminal block
  • Dimension: 192.8 mm x 72 mm
  • Mounting hole size: M3
  • I2C Address 0x20-0x27, user selectable
  • I2C 4.7K optional pull-up
  • 3.3A available for manager(raspberry pi) + additional modules
  • BEVRLink system expansion

Compatible Accessories

BEVRLink Din Rail clip
(compatible with the case but not directly the board)

BEVRLink 8 Channel Relay Case

BEVRLink Power Supply 5V 4A

Examples and Guides

How To Expand With More Relay Boards & How To Address

How to wire directly between the relay and single board computer/microcontroller


Inputs and outputs

I2C address selector

Examples of how to get started

Raspberry PI manager Python

Raspberry PICO manager Python

Raspberry PICO manager ESPHOME

ESP32 manager Arduino

ESP32 manager ESPHOME

Dimensions

Download 3D Model here

Example of applications

  • Automating a greenhouse by connecting the relays to control the temperature, humidity, and lighting.
  • Controlling a home automation system by connecting the relays to lights, appliances, and other devices.
  • Building a security system by connecting the relays to sensors and alarms.
  • Creating an industrial automation system by connecting the relays to machines and equipment.
  • Building a remote-controlled robot by connecting the relays to motors and other actuators.
  • Building an aquaponics system by connecting the relays to pumps, valves, and other equipment.
  • Building a weather station by connecting the relays to sensors for measuring temperature, humidity, and other weather parameters.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 29125348232

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 5 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mark Kadrich
Carnegie, US
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
J
Verified Purchase
Josh
Phoenix, US
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
W
Verified Purchase
william scott
Lake Worth, US
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
N
Verified Purchase
Nadezhda Gavrish
Carnegie, US
★★★★★ 5
Essential Tool for Effective Sound Deadening Installation
The Car Sound Deadening Roller Metal Installation Tool is a must-have for anyone looking to enhance their vehicle's acoustics. Designed to aid in the application of soundproofing materials, this roller ensures a smooth and efficient installation process. Key Features: Ergonomic Design: The tool features a comfortable handle that allows for extended use without causing hand fatigue. Durable Construction: Made with high-quality materials, it withstands the pressures of installation, ensuring longevity. Efficient Application: The roller helps in evenly pressing sound deadening materials onto surfaces, reducing air bubbles and ensuring a tight bond. Whether you're a DIY enthusiast or a professional, this tool simplifies the soundproofing process, leading to a quieter and more comfortable ride.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2025
I
Verified Purchase
igomesf
Battle Creek, US
★★★★★ 5
Great Quality and Easy to Use
This sound deadening roller set is a must-have for installing car insulation materials The metal wheels are durable and roll smoothly making it easy to apply pressure for a strong bond The different sizes are perfect for working in tight spaces and larger areas ensuring a professional finish The ergonomic handles provide a comfortable grip and allow better control during installation The rollers apply even pressure without damaging the material making the process much faster and more efficient This product offers great value for money excellent functionality and is easy to use If you are installing sound deadening material in your car this set is a great choice Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 31, 2025

recommand products

VINTAGE LINEN TWILL CAP - GREY
130.00
80's VINTAGE BRUSHED VELOUR CAP - BEIGE
72.92
Ada - Boho - Ivory - Asiatic London
129.99
VINTAGE TOTE - GREEN
75.95
70's DENIM CAP - NAVY
97.00