Ready2Talk Amplified PA System - PA64 Installer series

Ready2Talk Amplified PA System - PA64 Installer seriesPA64: Ready2Talk Standalone Amplified PA System, Installer Series The PA64 is Ready2Talk's full featured standalone PA system, built for tour buses and vans that don't have a stereo with usable AUX inputs. It installs like an old school car stereo and gives you genuinely good sound, dual mic inputs, and automatic music muting whenever the mic is keyed. Key Features 4 x 50W internal amplifier for clear, properly powered sound through your existing

PA64: Ready2Talk Standalone Amplified PA System, Installer Series

The PA64 is Ready2Talk's full-featured standalone PA system, built for tour buses and vans that don't have a stereo with usable AUX inputs. It installs like an old-school car stereo and gives you genuinely good sound, dual mic inputs, and automatic music muting whenever the mic is keyed.

Key Features

• 4 x 50W internal amplifier for clear, properly powered sound through your existing speakers.
• 2 x mic inputs, including support for two Bluetooth microphones at once.
• Connects to any stereo with dual level input, factory or aftermarket.
• Variable solid-state music muting, automatically ducks backing music or video from 0–100% when the mic is keyed.
• AUX input for an iPad or automated info system.
• Reversible front plate included, with reverse printing for upside-down mounting.

Works With

Pair the PA64 with a Ready2Talk wired or Bluetooth headset for a complete PA setup. Common options include the RME (rear mic extension, for a rear guide or party bus karaoke mic), the RMK (remote mounting kit, hides the unit for a custom look), the HS36T wired headset, the HS BT4 Bluetooth headset, and the HM BT4 Bluetooth hand mic for a commentator or passenger to ask questions.

Dimensions & Specifications

• Ver. 2.3
• High level input: 12VPP (peak to peak)
• Low level input: 450mV – 4V
• AUX input: 400mV
• Microphone input: 100mV
• Current drain (max): 12V constant power (yellow wire) 10A; 12V switched power (red wire) 250mA
• Total current drain at normal volumes: 2.5A
• Standby current drain: 30mA (with optional mute board)
• Power output (4 ohm speakers): 4 x 50W peak / 4 x 22W RMS
• Case (incl. flange): H 42mm x W 143mm x D 105mm (H 1-5/8" x W 5-5/8" x D 4-1/8")
• Front panel (excl. flange): H 42mm x W 118mm x D 105mm (H 1-5/8" x W 4-5/8" x D 4-1/8")

FAQs

Do I need a stereo with AUX input for the PA64? No, that's the point of the PA64; it's a standalone unit built for buses and vans that don't have AUX inputs to use.

Can I use two microphones at once? Yes, the PA64 has two mic inputs and supports two Bluetooth microphones simultaneously.

What's the difference between the PA64 and PA63? Both use the same 4 x 50W amplifier. The PA64 adds dual mic inputs, variable solid-state muting and a reversible front plate; the PA63 is the simplified, lower-cost version.