The new generation full-plane copper base eliminates the traditional screw perforation design, significantly enhancing water-tightness and ensuring more reliable system operation. Equipped with a precise 0.1mm micro-channel design, it efficiently absorbs CPU heat and works in tandem with the high-performance pump to quickly dissipate heat, delivering exceptional cooling performance.
Pay in installments of $411.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 3 - Sep 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
MSI MAG CORELIQUID A15 360CycloBlade Design: Focuses airflow and reduces noise. ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER. EPDM Tubing: Durable and effective in preventing coolant evaporation. Pre installed Fans: Saves gamers installation time and enhances the assembly experience. Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance Easy installation: Pre installed UNI Bracket (1700 1851 AM4
- CycloBlade Design: Focuses airflow and reduces noise.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance
- Easy installation: Pre-installed UNI Bracket (1700/1851/AM4/AM5)
Effortless assembly, endless possibilities
The MAG CORELIQUID A15 embodies a bold military-inspired design, featuring sharp, angular lines that exude strength and precision. A refined paint finish combined with brushed aluminum accents elevates the cooler head’s premium look. Paired with ARGB GEN2 lighting effects, it highlights the striking mix of materials, delivering eye-catching details that will make your setup truly stand out.
Full CPU Coverage
Improved Water Channel Design
Improved water channel design works seamlessly with the high-flow pump, efficiently dissipating the heat absorbed by the copper base. This ensures excellent cooling performance, keeping the system cool and stable even under heavy loads, elevating both performance and reliability to new heights.
ARGB GEN2
Through MSI Center, ARGB GEN2 lighting effects are easily controlled, with indirect lighting subtly integrated into the curved grooves, creating a vibrant interplay of colors and shadows that highlights the product's understated and refined design. The frosted exterior finish perfectly complements the steel-gray painted cover, with only the semi-transparent MSI logo exposed. The light from the logo harmonizes with the rounded corners, delivering an exquisite visual experience.
CycloBlade 9 hybrid blade design
MSI's CycloBlade 9 fan features a hybrid blade design, delivering powerful airflow and high static pressure. This ensures extreme cooling performance during intense gaming while maintaining low noise levels for an immersive experience. Additionally, the ARGB GEN2 lighting effects make your rig stand out on the battlefield, making it the ultimate choice for esports players.
Split-Flow Radiator
The aluminum radiator employs a 12-channel, split-flow design that divides incoming heated water and outgoing cooled water into two 6-channel paths.
This improves thermal dissipation between coolant and fan-cooled air.
Tubing comprises of multi-layered netted plastic concealed beneath reinforced mesh sheathing to ensure that coolant stays inside the closed-loop system at all times.
Adjustable Offset kit
The adjustable offset kit provides 2 positions and allows for precise adjustment base on the position of the CPU, ensuring optimal alignment and significantly improving the cooling performance.
MSI Center Optimization
MSI Center software unlocks multiple cooling profiles as well as customizable fan curve settings through an MSI motherboard:
- Silent, Game Mode, and Balanced profiles
- Customizable radiator fan speed curves
UNI Bracket
The pre-installed and easy-to-use UNI Bracket supports both Intel and AMD sockets, significantly reducing assembly time and improving the quality of DIY builds for gamers.
- Spec Table
Number of Fans 3 Fan Dimensions 120 x 120 x 25 mm / 4.7 x 4.7 x 0.98 inches Fan Power Consumption 1.68W±0.336W Fan Rated Current 0.14 A±0.028 A Fan Life Expectancy 40,000 hrs@40℃ Fan Bearing Rifle Bearing Water Cooling Tube Material EPDM + IIR Fan Air Flow 64.89 CFM Fan Lighting ARGB GEN2 PWM Mode Yes Fan Cable Length (5V ARGB / PWM cable) 600 mm; 23.62 inches Fan Speed 500~2050 ± 150 RPM Radiator Material Aluminum Radiator Dimensions 394 x 119.6 x 27.2mm / 15.51 x 4.69 x 1.06 inches Block Dimensions 71.23 x 69.47 x 75.05 mm Fan Connector 5V ARGB 3-PIN Header Block Lighting ARGB GEN2 Pump Life Expectancy 50,000 hours in typical use Pump Noise Level 20 dBA ( Max ) Pump Speed 3400 RPM ± 10% RPM Pump Rated Current 0.21A±0.042 Pump Power Consumption 2.52W±0.504W Pump Connector 4-PIN Header
5V ARGB 3-PIN Header ( Female )Intel Socket LGA 1851 / 1700 AMD Socket AM5 / AM4 Accessories Thermal paste x 1
Screws x 12Radiator Size 360 mm Cold Plate Material Copper
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 4
$7 value
Color: Black, Size: normal
Works wonderfully if the liquid you’re blending has no viscosity, but it slows down brutally if given any kind of resistance.
It’s small and lightweight and very easy to use.
Works for my bloom, but it does not work very well for my protein shakes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
★★★★★ 5
My Matcha Frother
Color: Silver, Color: Silver
I recently started making matcha tea at home and opted for a milk frother instead of the bamboo hand whisk that is traditionally used for matcha, due to health issues. I have a connective tissue disorder and early osteoarthritis and need to protect my wrists, so the hand whisk would be risky for my daily matcha habit. The Vomelon frother is perfect for mixing up my matcha tea powder into my water or almond milk while saving my joints from further damage.
I liked the included cover for this model, and the large on/off button on the top of the device. Other models have their switches and buttons placed in odd places that could be awkward for me. I have trouble pushing this device's button with my thumb, even though it seems designed to be done this way, so I typically use my index finger to switch it on and off. This works well for me. You don't have to hold the button while it's on - it stays on until you turn it off - so that helps.
The two coil attachments are nice, too. The single coil one does a decent job, but the triple coil really blends up well, and froths up my almond milk into a airy, frothy cup rather quickly, if that's what I'm going for.
It uses 3 AAA batteries, and I worried they would get used up with daily use, but I have been using mine daily for about a minute or so each day (I blend my matcha, then rinse off by blending clean water and then spin dry before I store it) every day for about a month now and it's still going strong on the original batteries. I am ready with spares for whenever they peter out, though. I checked the battery chamber to make sure I knew how to switch them out, and it's very easy. They are stacked in the end of the device, so you just twist off the end and slide out. There is a holder for the 3 batteries, so you pop them out/in and just slide it back into the main housing and twist it back on. The +/-indicators show which way to place them. I believe it's 2 one way and one the opposite way.
The attachments simply hold onto the spinning bit with tiny grooves in the spinner that fit snugly. They don't click into place or anything, but I have had no trouble with them feeling loose or anything while in use, as long as they are fully in place. Just slide them all the way in and you'll be fine.
Overall, this works well for my matcha tea and milk frothing needs. I tried it once with an egg to see how well it scrambled, but I used the single coil attachment and it seemed to slow down a lot in the gooey egg viscosity, so I can't say I would recommend it for scrambling eggs, especially if you are doing more than one at a time. However, I only tried once and only with the smaller, single coil attachment. You may have better luck with it if that's what you're looking to use it for.
Overall, I'm happy with my purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2019
★★★★★ 5
Great whisk, but stop changing the whisk design or sell extras
Color: Silver
Overall, I really like this frother. It’s my third one from the same brand. (They last about a year but kind of expected for $15.) I like that it comes with multiple whisks, that it can travel, and that the whisks are removable and can be thrown in the dishwasher. As others have pointed out, the batteries it comes with are pretty useless. I didn’t get even one proper whisk out of them. I also wish they wouldn’t change the whisk design every time I purchase. I like having extra whisks and just have to throw the old ones out. I wish these companies would sell extra whisks.
Update: after using this for a couple weeks, I really don’t like the design of he new whisk attachments. They’re hard to pull off without sending the tip flying.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 23, 2026
★★★★★ 5
Delightful little device now that I've had a practice run with it
Color: Silver
I just picked this up to make my own cappuccino and breve and I must say that I've fallen in love with the thing. My first use was a bit of a misfire owing to my inexperience with it, but the second time worked like a champ. The trick is to ensure that you have plenty of empty head space in the container to develop a good vortex and foam volume while still having a tall enough fluid column to keep the mixing head mostly submerged while generating the vortex.
My first attempt involved using about half a cup of half and half in a small saucepan. I had more than enough head space, but I was only barely able to keep the mixing head (it comes with two: a single turn coil and a 3-turn coil of coil) submerged and that went poorly, leaving me with a bit of a mess to clean up on my rangetop as the lack of fluid column ended up slinging the fluid around and out of the saucepan.
The second attempt went far better, as I transferred the barely-simmered half and half back into the Pyrex two-cup mixing cup in which i initially measured the 4 fl. oz. This time it worked beautifully. There was just enough unfoamed column height to keep the mixing head well covered prior to powering up and it just barely kept me sufficiently covered while powered up to maintain a very vigorous yet controlled vortex. This method also had the advantage of telling me exactly how much total foamed volume I had generated. The resulting breve had a wonderfully thick and frothy head in my mug and resulted in a delightfully topped beverage which, if anything, had a bit too much foam and a bit too little liquid. That's on me, however, since I wanted to get a feel for the device under better conditions to build my own experience; I'll just run the frother for less time next time.
Cleanup of the device itself is quite easy: simply detach the mixing head and shaft from the motor base and rinse. I always hand-wash my dishes, so I'm not in a good position to speak to its machine wash compatibility, but I suspect that it would come out just fine, provided that care is taken not to bend the shaft or coil head out of shape.
The device itself is small enough to fit in a purse and should travel quite nicely, though you'll need to commit to a single mixing head, which will almost certainly turn out to be the smaller one.
It's really nice to be able to make cappuccino/breve at home any time I see fit now. It's going to make a well-loved addition to my kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2018
★★★★★ 4
Worked well, fast, then overheated. Contacted Vomelon and they were quick to help me replace unit.
Color: Silver
Update ***Vomelon customer service is great! I contacted them about my issue, they responded quickly and worked to resolve it. They're giving me a new one! Hope this one works out. I'm adding back a star for their service.
Update 4/18/20 While making whipped Dalgona coffee today the unit slowed down the completely shut off. I pressed the power button again to restart and same thing, it starts at high speed then slows down and shuts off. I will be contacting seller. I’m taking away a star, can’t believe this is happening.
First day using this frother with the batteries provided and the body became very hot. Used it for about 3 minutes and the heat became uncomfortable in my hands. Took out the AAA alkaline batteries “Nai Li Wang” brand made in China and replaced them with some Kirkland AAA that I had on hand. Problem solved! No overheating with the new batteries. Throwing away the China made batteries. Would’ve been 5 stars if it weren’t for the overheating.
Other than that mishap, the frother was easy to use and pretty powerful. Whipped up my coffee with maple syrup (making Dalgona coffee) really quick. I like that it has a cover for storage. I don’t have much space so having a compact size with a cover is convenient, I can put it in a drawer or storage box without damage to the whisk.
Update: Day 2 of use
Body of unit became warm but not hot as with original batteries provided. I used new batteries. Had the unit on for 4-5 minutes to whip my dalgona coffee. Not sure if the unit is supposed to get warm? Is it normal? I will contact seller.
Besides that, my coffee got whipped pretty quick. I want to upload a photo but seems that Amazon has taken away that function for me? I could upload photos for my previous reviews on other products.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2020
recommand products
DeatschWerks 320 LPH In-Tank Fuel Pump w/ 06-09 Honda S2000 Set Up Kit
174.95
DeatschWerks 255 LPH In-Tank Fuel Pump w/ Set Up Kit 07-18 Harley-Davidson Sportster
112.95
Fanchi-B Denim Pants
127.36
CABOTINE ROSE by Parfums Gres EDT SPRAY 3.4 OZ
29.99
DeatschWerks 08-21 Subaru WRX/STI X2 Series Fuel Pump Module w/ Dual DW300 Pumps
344.98