Pay in installments of $667.69 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 24 - Aug 29
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2023 Ford F-250/F-350 Super Duty 4WD Diesel 2.5 Inch Lift Stage 4 Suspension System W/ Expansion Packs Icon Vehicle DynamicsThe ICON 2. 5 Inch suspension system is a great way to lift your 4WD 2023 Ford F 250 F 350 Super Duty while improving ride quality and performance. This upgraded Stage 4 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. Also included in this stage is ICON's CDC Valve front and rear shocks, for those desiring an easy way to tune the ride externally with 10 settings, from soft
The ICON 2.5 Inch suspension system is a great way to lift your 4WD 2023 Ford F-250/F-350 Super Duty while improving ride quality and performance. This upgraded Stage 4 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel.
Also included in this stage is ICON's CDC Valve front and rear shocks, for those desiring an easy way to tune the ride externally with 10 settings, from soft to hard. ICON's Stage 4 System is comprised of dual rate coil springs optimized for trucks equipped with diesel engines, 2.5 Aluminum Series CDCV remote reservoir front and CDCV piggyback reservoir rear shocks, adjustable front track bar with massive FK rod end, alignment cams for adding caster, and rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap.
ICON 2.5 Inch remote reservoir and piggyback reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.
Features and Benefits:- ICON engineered dual rate coil springs provide 2.5 Inch of front lift over stock
- Vehicle specific tuned remote reservoir front and piggyback reservoir rear 2.5 Aluminum Series shocks
- Front and rear shocks equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
- On-vehicle adjustable track bar for optimum front axle centering and minimal deflection
- Application specific alignment cams ensure proper caster alignment
- Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap
- Increased wheel travel and improved ride quality over stock with no change in towing capacity
- Less body-roll than stock
- Lifetime guarantee that springs won't sag or break
- No drive shaft modifications required
- Shocks are fully rebuildable and re-tunable
- 100 Percent Bolt-on system - no drilling, cutting or welding necessary for install
- Active Or Passive Suspension: Passive
- Adjustable Compression: Yes
- Adjustable Damping: Yes
- Adjustable Rebound: No
- Bushings Included: Yes
- Coil Quantity Front: 2.0
- Coil Spring Color: Black
- Coil Spring Material: Steel
- Coils Quantity Front: 2.0
- Damping Adjustment Type: Manual
- Dual Rate Coil Springs: Yes
- Front Reservoir Style: Remote
- Front Shock Body Diameter: 2.5
- Front Spring Rate Type: Progressive Dual Rate
- Grade Type: Performance
- Leaf Spring Color: Black
- Leaf Spring Leaf Quantity: 7.0
- Leaf Spring Material: Steel
- Maximum Lift: 2.5 Inch
- Maximum Lift Front: 2.5 Inch
- Maximum Lift Height Front: 2.5 Inch
- Maximum Lift Height Rear: 0.5 Inch
- Maximum Lift Rear: 2.0 Inch
- Minimum Lift Front: 1.5 Inch
- Mounting Hardware Included: Yes
- Oem Wheels & Tires Fitment: Yes
- Rear Reservoir Style: Piggyback
- Rear Shock Body Diameter: 2.5
- Recommended Aftermarket Tires: 35 Inch X 12.50 Inch (Larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels: Icon Alloys - 18x9 Inch W/ 5.25 Inch Backspace / 6mm Offset, Icon Alloys - 20x9 Inch W/ 5.25 Inch Backspace / 6mm Offset, Icon Alloys - 17x8.5 Inch W/ 5 Inch Backspace / 6mm Offset
- Shocks Included: Yes
- Spring Color: Black
- Spring Material: Steel
- Add On Part: 61111 - 17-25 FSD Front 2.5 Inch Extended Ss Brake Line Kit, 191014 - .25 Inch Collar Spanner Pin Wrench, 611081 - F-Series Dynamic Headlamp Rear Sensor Kit, 64039 - 08-25 FSD Track Bar Bump Steer Bracket Kit
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Excellent mount, especially if you want your monitor mounted higher above the desk.
Size: 13"-32", Style: Single
This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026
★★★★★ 5
Easy and Functional for 3 Monitor Setup
Size: 13"-27", Style: Triple
Some assembly required. Used this to re-configure my 3 monitor setup. 2 27" monitors across the bottom and a 20-ish" monitor up top. First and foremost, anything bigger than 27" on the bottom two and it will not work. The span was just barely long enough for my application and still allow for any articulation of the monitors. I would prefer to have them angle towards me just a little more, but it works. Assembly was straight-forward. Instructions were pretty clear as far as the pictures go. I didnt actually read the text, but thats pretty much how obvious it is to assemble and mount the monitors. The tubing and clamps feel heavy-duty. With the exception of a drill, drill bits, and phillips head screw driver, they provide the tools and hardware necessary to assemble, mount and adjust the monitors, to include longer screws and offsets for the monitors if required.
Installation on my desk went well. I used the through hole option strictly due to the desk not being able to accomodate the clamp. Word of caution... with all three monitors hung on the mount, this thing is HEAVY and all supported by just the main tube. If you use the clamp option, make sure your desktop/tabletop will allow the clamp to fully seat. Otherwise, you run the risk of it slipping loose and you'll be wearing the monitors if you happen to be sitting in front of them when it comes down.
Once all the monitors are mounted, the overall setup is surprisingly sturdy considering the size of the main support tube. Yes, it will wobble some, but overall, it works pretty well and once the clamps are locked into place the monitors stay in place. Took a couple of hours for me to get it all set up, but it could be done quicker I'm sure.
All in all, me likey!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 13, 2022
★★★★★ 5
Good value, well made, easy assembly.
Size: 13"-32", Style: Single
Well made, easy assembly, very versatile and cable management included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Overdo is what I do
Size: 13"-32", Style: Single
Since my 50" monitor is under the 22lb weight limit, I decided to give this arm a shot. Nobody seems to make an arm for something as big as a 50-inch even if they don't actually weigh that much.
So what happened? The arm CAN support that weight and size. The manufacturer did a great job on the materials and it assembles very easily. For a regular monitor, this arm should work great.
But the clamp design is not exactly sturdy enough for my bigger screen that exceeds the intended use. Clamped to the table top alone, the pole had a serious and unsafe lean to it. I ended up reinforcing my table with three layers of plywood secured with lag bolts right through the table top. Between the layers of plywood is the table top and a steel beam that the table top sits on. So this is a ridiculously strong base. With that in place, the arm does hold the monitor in the fully retracted position. Extended, there is way too much leverage and the arm starts to lean. So don't do that. It needs to stay totally retracted to the pole.
To fit my monitor, I had to get VESA extension wings and those worked fine. This provides the solution I am going to use: angle irons bolted to the wings and running down to the table. I have room to do this. The angle irons will take up most of the weight and let the arm stay vertical and let me move it around. So it will be a three-legged mount instead of one. Eh. It will work fine for me until I come up with something better.
Very tempted to drill holes in the clamp base and lag bolt that to the table. Nothing is going to beat that except welding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2022
★★★★★ 5
27" monitor mounted easily
Style: Single Arm, Size: 13"-34", Style: Single Arm, Size: 13"-34"
I ended up getting 2 of these monitor arms for the different desks in our office, and I am happy with both of them. The arms are super easy to assemble and adjust to the tension one desires. The arms hold the position where one sets them too, and the gas pistons make it super easy to use.
Each arm has a channel on the bottom that allows the wiring to be ran through and hidden, yet remaining accessible if needed. The mounting clamps hold securely and there is no wiggle whatsoever, and it is nice to have a strong feeling monitor mount.
It is lightweight and compact so it doesn't feel clunky on the desk. Highly adjustable left to right, up and down, and the screen forward and backward tilt. The price is really good for the overall value and quality of the product. Just make sure to order the right mounting arm depending on the size of your monitor, and you will be fine.
Nice quality and feel, and the aesthetics are great too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
recommand products
Barbara Stanwyck portrait 8b20-7213
11.49
Steering Idler Arm RareParts 20756
182.35
mbeat Bluetooth Hands-free Car Kit 2.1A Charging Port - BT/FM Music Transmitter/Play Back USB Desk/SD Card Music/Built-in 2.1 A Smart Charge USB
46.00
UGREEN Adjustable Desk Phone Holder (Black) - 80194
18.00
Steering Idler Arm RareParts 20310
130.45