154827601 Door Seal & 809006501 Lower Seal & 154701001 Splash Shield Kit for Frigidaire Kenmore Crosley Dishwashers

154827601 Door Seal & 809006501 Lower Seal & 154701001 Splash Shield Kit for Frigidaire Kenmore Crosley Dishwashers154827601 Door Seal, 809006501 Lower Seal, 154701001 Splash Shield Kit Key Features Total Perimeter Protection: This comprehensive kit includes the 154827601 main "U shaped" tub gasket to seal the top and sides, plus the critical 809006501 lower seal for bottom edge protection. Dual Action Corner Baffles: Features the 154701001 splash shield kit, specifically designed to bridge the gap between the tub frame and the door corners where high pressure

154827601 Door Seal, 809006501 Lower Seal, 154701001 Splash Shield Kit

Key Features

• Total Perimeter Protection: This comprehensive kit includes the 154827601 main "U-shaped" tub gasket to seal the top and sides, plus the critical 809006501 lower seal for bottom-edge protection.
• Dual-Action Corner Baffles: Features the 154701001 splash shield kit, specifically designed to bridge the gap between the tub frame and the door corners where high-pressure leaks are most common.
• High-Compression EPDM Rubber: All seals are manufactured from premium, heat-resistant EPDM rubber that maintains its sealing "memory" through thousands of high-temperature "Sanitize" and "Heated Dry" cycles.
• Enhanced Structural Integrity: The 809006501 lower seal is engineered with reinforced plastic or rubber mounting tabs to prevent sagging or shifting during the high-turbulence wash phase.

Replaces / Cross-Reference Part Numbers

• Main Tub Gasket: 154827601, 154588801, 154211801, AP5690109, PS5573575.
• Lower Door Seal: 809006501, 154827601 (Lower Variant), AP5809675, PS9494101.
• Corner Splash Shields: 154701001, 154685101, 1465007, AP4338941, PS2203346.

Compatibility & Fitment

This seal kit is the universal solution for most modern Frigidaire-manufactured plastic tub dishwashers. Key compatible brands include:

• Frigidaire: Fits hundreds of FDB, FDP, FBD, and FFBD series models (e.g., FDB1050REB, FFBD2406NW, FGBD2431KF).
• Kenmore (587 Series): Compatible with dozens of 587-prefix dishwashers produced by Frigidaire for Sears (e.g., 587.14002990, 587.15112401).
• Crosley, Tappan, & Gibson: Direct fit for budget-friendly and standard tall-tub units utilizing these standardized Frigidaire parts.
• Note: Specifically for Plastic Tub models. If you have a stainless steel interior, your gasket and splash shield configuration will differ.

When to Replace

• Puddles Forming on Floor: Water leaking from the front-center (Lower Seal), sides (Tub Gasket), or bottom corners (Splash Shields) during the wash cycle.
• Steam Escaping Door: Visible condensation on your countertops or the dishwasher control panel, indicating the gasket has flattened and lost its compression.
• Visible Cracking or Tearing: The rubber components look shredded, brittle, or have chunks missing from the sealing ribs.
• Black Mold or Persistent Odors: Excessive slime or mold build-up inside the gasket folds that cannot be cleaned, indicating the material has degraded.
• Door "Feeling" Loose: The door latches too easily without the usual resistance, suggesting the seals are no longer creating a tight, pressurized barrier.

Installation Tips

• The "Warm Soak" Trick: Before installing the 154827601 main gasket, soak it in warm water for 15 minutes. This makes the rubber pliable and helps remove shipping kinks for a better seal.
• Clean the Channel: After removing the old tub gasket, use a small brush and vinegar to thoroughly clean the tub's mounting channel. Debris or old soap left behind will prevent the new seal from seating correctly.
• Midpoint Alignment: Fold the main gasket in half to find the center. Start by pressing the midpoint into the top-center of the tub and work your way down the sides evenly to avoid stretching the rubber.
• Splash Shield Orientation: Ensure the ribbed side of the 154701001 shields faces toward the door. Press them firmly into the bottom corners until they "click" or seat fully.
• The "24-Hour" Set: After replacing all seals, close and latch the dishwasher door for at least 24 hours without running a cycle. This allows the new rubber to conform perfectly to the door's shape.