SKU: 89739635842

Greenfingers Grow Tent Light Kit 240x120x200CM 2000W LED 6" Vent Fan,Greenfingers Grow Tent Light Kit LED 2000W Full Spectrum 6" Vent 240x120x200CM

$6240.15 $6933.50
Save 10%
No.2 Bestseller on 2pierres.com >

Pay in installments of $1733.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 19 - Oct 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Greenfingers Grow Tent Light Kit 240x120x200CM 2000W LED 6" Vent Fan,Greenfingers Grow Tent Light Kit LED 2000W Full Spectrum 6" Vent 240x120x200CMNeed to keep your precious flora and vegetation growing healthy in every season? Our Green Fingers LED Grow Light is the perfect solution. Our grow light is designed to stimulate plant growth by emitting a light appropriate for photosynthesis where there is either no naturally occurring light, or where supplemental light is required. It provides a light spectrum similar to that of the sun and outdoor conditions are mimicked with varying colour,

Need to keep your precious flora and vegetation growing healthy in every season? Our Green Fingers LED Grow Light is the perfect solution. Our grow light is designed to stimulate plant growth by emitting a light appropriate for photosynthesis where there is either no naturally occurring light, or where supplemental light is required. It provides a light spectrum similar to that of the sun and outdoor conditions are mimicked with varying colour, temperatures and spectral outputs from the grow light, as well as varying the lumen output (intensity) of the lamps.

With LEDs, there is a cost savings of up to 70% for the most effective produce per watt. Both ballast and reflector are built-in for certain models, and an advanced thermal system keeps the ensemble cool at all times. Plus, the full spectrum control also provides plants and flowers everything they desire in natural sunlight. Not least, the grow light is engineered to keep the balance with high PAR and suitable coverage so that light is spread out and not concentrated at the center to prevent sunburn. With a lifespan of up to 100,000hours, the LED grow light is guaranteed to give you higher yields and better harvest time and again.

As a perfect accessory to the grow light, our Grow Tent is designed to ensure optimum utilization of the grow light to maximise yields. The powder-coated steel frame and highly durable interior and interior fabric construction all adds to its long-lasting functionality.

Other useful add-ons include a powerful ventilation fan and efficient active carbon filter and a long 5m ducting to facilitate hassle-free installation.

Note: LEDS are extremely bright when working. Do not look directly into them.

Features
Grow Tent
Strong steel construction
Heavy-duty corner connectors
Easy install, no tools needed
Spacious interior
600D oxford cloth exterior
Aluminium foil inner lining
Removable water-proof floor tray
Heavy-duty support bar for lights and fans
Zippered doors and zippered windows
One cooling air tube
Two air extraction openings
Two power cord ports
Three ventilation windows
LED grow light 2000W
High PAR value
For all stages of plant growth
Intelligent Epistar LED chip
Up to 70% costs savings
Advanced thermal management system
Life expectancy 50,000hrs to 100,000hrs
Indoor use
Standard Australian plug
RCM, SAA, CE, RoHS certified
6" Ventilation Fan
CE certificate
High impact polycarbonate blade
AU standard plug
Powerful and efficient performance
Lightweight and practical.
Noiseless and power saving
6" Active Carbon Filter
Recommended filter flow: 290~500m3/h
50mm RC-48 Australian virgin carbon bed
Vibra machine packed carbon
Customized open air stainless steel mesh
Anti-air-bypass technology
5m Aluminium Ducting
Standard 5 meters length, compressed to 0.4-0.6 meter
Individually boxed
Easy to connect to either round or oval ducting
No special tools required for cutting or fixing
Fire-resistant
Heavy-duty and flexible dual layer Aluminium foil

Specifications:
Grow Tent
Frame: Powder coated steel
Exterior fabric: 600D Oxford cloth
Interior fabric: 600D Diamond texture
Inner lining: Aluminium foil
Overall dimensions: 120cm x 120cm x 200cm
Colour: Black and Green
Assembly required: Yes
Number of packages: 1
Grow Light
LED Quantities: 198pcs 10W LEDs
Avg. Power Draw: 400watt�5?
Perfect for 4ft x 4ft vegetative coverage at 24" height
Perfect for 3.5ft x 3.5ft flowering coverage at 18" height
LEDs Angle: 90�
Input Voltage: AC100-240V
Frequency: 50-60Hz
Lifespan: 100,000 hours
Replaces a 1000watt HPS/MH
Spectrum: 450-470nm,620-630nm,650-670nm,UV400-410,IR730,6000k,3000k
6" Ventilation Fan
Current: 0.2A
Power: 32W
Speed: 2500rpm
Air flow: 350m3/H
Noise: 34fb (A)
6" Carbon Filter
Material: Stainless steel
Weight: 3.2kg /5.5kg
Ducting
Length: 5m
Material: Dual-layer aluminium foil
Assembly required: Yes
Number of packages: 3

Package Content
1 x Greenfingers LED Grow Light
1 x Greenfingers Grow Tent
1 x Ventilation Kit
1 x Assembly Instructions

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 89739635842

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Omaha, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
C
Verified Purchase
Chris Stockbridge
Los Angeles, US
★★★★★ 5
Worth the investment
Size: 1 Panel, Size: 1 Panel
I had to order this in an emergency. To put it in brief words, I live in a two level studio unit. My bedroom TV fell backwards off the bureau accidentally and down the stairs to its demise. Putting this together was no problem, instructions were thorough and easy. It came with several bars that connected together smoothly and an Allen key for the brackets and screws for the feet. I did one less horizontal bar on top and bottom so it could fit, which was great because with all of them on it was too long. However I ran into the difficulty of the horizontal bars popping out of the brackets during the last stages, but eventually got it done. I was also looking for a specific type of divider where I could adjust the feet so I could tuck it in between the dresser and banister. Glad I made this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
I
Verified Purchase
Interloper
Battle Creek, US
★★★★★ 1
You Get What You Pay For! A Piece Of Junk!
Size: 1 Panel
Flimsy and a piece of junk. Don’t waste your money. Assembly is a pain because it is so flimsy. Divider is thin. You can see right through it. Very wobbly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2026
J
Verified Purchase
JAMES HAYES
Whiting, US
★★★★★ 4
Instructions are useless
Size: 1 Panel
The instructions are poorly written and not very helpful. The divider itself is easy to assemble, and honestly, it would’ve been quicker if I had skipped the directions altogether. Once put together, though, it works as intended.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
P
Platinum Motif
West Palm Beach, US
★★★★★ 5
This was the best
Size: 1 Panel
This divider is great for creating a little privacy or separating a small area without taking up much space. The fabric is thick enough to block visual clutter, and the frame is lightweight but stable once it’s opened. It folds flat for storage, which is convenient if you only need it occasionally. Assembly was straightforward, and it was the perfect size. It’s a practical piece for apartments, studios, or home offices where you want a quick, temporary partition.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026

recommand products

Flor Hibiscus Dress
58.00
Deer and Raven - Wildlife Photography - Wood Framed Canvas
19.00
Fina Shirt
25.00
Emi Necklace
14.00
Chocolate Handbag
18.00