Fusion Stain and Finishing Oil SFO Wood Finish

Fusion Stain and Finishing Oil SFO Wood FinishStain & Finishing Oil (SFO) is a wood conditioner, stain, and top coat all in one that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring. It can be used on bare wood or over previously painted surfaces. No additional top coat is required it is highly durable as is. If youre looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your colour.

Stain & Finishing Oil (SFO) is a wood conditioner, stain, and top coat all in one that offers exceptional durability in high-traffic areas like table tops, kitchen cabinets, and even flooring.

It can be used on bare wood or over previously painted surfaces. No additional top coat is required – it is highly durable as is. If you’re looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your colour.

If you apply it over Fusion Mineral Paint™ for a glaze effect or to increase the sheen, we recommend removing excess immediately, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.

Use the Natural colour over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect.

Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 litre of comparable stains.

Please keep in mind that all oil-based products typically yellow in time. Using this over top of white paints will cause a slight yellowing effect. We recommend our Tough Coat for going over lighter colours to avoid yellowing.

Application Tool: Brush, lint free rag, applicator pad

Location: Interior

Re-coat Time 9 hrs

Top Coat No additional top coat is required.- this is made strong enough for floors and table tops. However you may use wax or “Natural” colour Stain & Finishing Oil to increase the sheen but not deepen the colour.

Clean Up Odourless Mineral Spirit

Coverage 40-75 sq.ft. The 237 mL container will cover the same area as 1 litre of comparable stains.

Finish/Sheen Matte to high sheen. Each additional layer and buffing increases the sheen. Recommended Uses: Reclaimed wood, bare wood, table tops, floors, most any surface, painted finish or Milk Painted pieces.

Can Be Applied To : Use as a stain over raw or well-sanded wood; apply over painted surface for added sheen, glaze effect, or added protection; seal milk paint or other porous paint. Not recommended over light colours as it will yellow.

Can Be Painted Over: Yes, once dried if over bare wood and only 1 coat applied, 10 days after for multiple coats applied . Test to ensure prior to tackling a full project.

How to Prep: Apply over any surface or top coat for desired effect except wax.

Cure Time: 10 Days

Maintenance/ Cleaning : Light cleaners, as they will strip away the natural oil.

How To Use on Bare Wood: pour or brush onto an evenly sanded surface; remove excess after 15-20 minutes. If desired, add a second coat after re-coat time for deeper colour or more sheen. The pigment in it stains your wood, accentuating the grain. SFO combines natural oils and resins that penetrate into wood fibres to create a durable, scratch-resistant, waterproof finish. It does not leave a surface film that sits on top but instead soaks into and becomes a part of your wood.

If applying over Fusion Mineral Paint, remove excess immediately.