Pay in installments of $1830.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 19 - Aug 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Power Conditioner, Voltage Regulator, & Battery Backup UPS For Thermo Fisher Scientific ISQ 7000 Single Quadrupole GC-MS SystemThis system is designed to provide voltage regulation, surge suppression, and automatic emergency backup power specifically for the Thermo Fisher Scientific ISQ 7000 Single Quadrupole GC MS System. Software Loaded For Specific Instrument Operation The UPS is loaded with software settings that limit the voltage fluctuations to within the range specified within the instrument site preparation guide. Hardware Configuration For Specific Instrument
This system is designed to provide voltage regulation, surge suppression, and automatic emergency backup power specifically for the Thermo Fisher Scientific ISQ 7000 Single Quadrupole GC-MS System.
Software Loaded For Specific Instrument Operation - The UPS is loaded with software settings that limit the voltage fluctuations to within the range specified within the instrument site preparation guide.
Hardware Configuration For Specific Instrument Operation - The UPS internal bypass wire is removed which prevents voltages outside the acceptable operating range specified in the site preparation guide of the instrument to be passed through to the instrument.
-
Cuts Utility/Electric Costs compared to other battery backup UPS systems.
-
Slashes Setup/Installation Costs by requiring only a single receptacle for the UPS to be plugged into for power. If you don't already have the required receptacle, it can be installed by an electrician in advance of receiving the UPS and typically costs a fraction of the cost that it would cost to normally hardwire the UPS into an electrical panel.
-
Reduces Setup Time as the system arrives on a mini pallet with ramp included, rolls off the pallet, plugs into your wall receptacle, has a single switch/breaker on the back, and an ON button on the front LCD. The pre-installed dual voltage output PDU (power distribution unit) has all of the most used receptacles in North America so equipment can simply be plugged in. Unpacking, setup, and power up can be done within 5-10 minutes with only a Phillips screwdriver to unscrew the pallet blocks.
-
Eliminates Down Time as short duration power outages, voltage inconsistencies, surges, and other power issues are isolated away from any equipment you attach to the output receptacles.
-
Prolongs Equipment Life as built in circuit protection and voltage regulation ensure only the correct operating voltage is provided to the instrument at all times. Our factory configures this variation of the battery backup UPS in power conditioning mode so the unit will NOT ever switch to bypass mode which would potentially expose the attached equipment to the power problems and improper voltages.
-
Multiple Device Support as up to 10,000 VA of power consumption can be handled by the UPS. The output PDU has multiple receptacles and 2 simultaneous voltage outputs that match each receptacle type. Need less power? Use our 6KVA model.
- Plug And Play Functionality, rolls off the pallet ready to plug in and turn on.
- INPUT: NEMA 6-50P (Plug)
- 208, 220, 230, or 240 Volts Single Phase, 50 Amp Breaker
- OUTPUT:
- 8x NEMA 5-15/20R (Receptacles, 115 Volts)
*Fits Either NEMA 5-15P (Plug) Or NEMA 5-20P (Plug) - 1x NEMA L5-30R (Receptacle, Twist Lock, 115 Volts)
*Fits NEMA L5-30P (Plug, Twist Lock) - 2x NEMA L6-15R (Receptacle, Twist Lock, 230 Volts)
*Fits NEMA L6-15P (Plug, Twist Lock) - 1x NEMA L6-20R (Receptacle, Twist Lock, 230 Volts)
*Fits NEMA L6-20P (Plug, Twist Lock) - 4x NEMA 6-15/20R (Receptacles, 230 Volts)
*Fits Either NEMA 6-15P (Plug) Or NEMA 6-20P (Plug) - 1x NEMA L6-30R (Receptacle, Twist Lock, 230 Volts)
*Fits NEMA L6-30P (Plug, Twist Lock)
User Guides:
-Battery Backup Power 6KVA-10KVA 1.0 PF Advanced Digital Tower UPS User Guide
-Battery Backup Power SNMP Card Full User Guide.pdf
Spec Sheet/Cut Sheet:
-BBP 4.5-10KVA 1.0 PF Advanced Digital Tower Specification Sheet.pdf
Complete 5 Tier Power Protection System – Surge Protection, Real Time Power Conditioning With Voltage Regulation, Heavy Duty Isolation Transformer, Pure Sine Wave Output, & Always On Double Conversion Backup Power Technology.
Extreme Energy Savings - Saves up to $3,153.60 per year over older model 10 KVA UPS systems in annual electricity costs due to energy efficiency enhancements.
Multiple Backup Time Options:
| Model Number: | Description (Under Battery Options Drop Down): | Approximate Backup Time At Full Load: |
| BBP-ADV-10K-650P-115230PDU-ISQ7000 | UPS With Internal Batteries Only (20 Batteries, 12 Volts, 9 Amp Hours Each) | 11 Minutes |
| BBP-ADV-10K-650P-115230PDU-ISQ7000-WEBPWC | UPS Plus 1 Extra External Battery Pack (80 Batteries, 12 Volts, 9 Amp Hours Each) | 46 Minutes |
| BBP-ADV-10K-650P-115230PDU-ISQ7000-W2EBPWC | UPS Plus 2 Extra External Battery Packs (140 Batteries, 12 Volts, 9 Amp Hours Each) | 1 Hour 21 Minutes |
| BBP-ADV-10K-650P-115230PDU-ISQ7000-W3EBPWC | UPS Plus 3 Extra External Battery Packs (200 Batteries, 12 Volts, 9 Amp Hours Each) | 1 Hour 56 Minutes |
| BBP-ADV-10K-650P-115230PDU-ISQ7000-W4EBPWC | UPS Plus 4 Extra External Battery Packs (260 Batteries, 12 Volts, 9 Amp Hours Each) | 2 Hours 31 Minutes |
| BBP-ADV-10K-650P-115230PDU-ISQ7000-W5EBPWC | UPS Plus 5 Extra External Battery Packs (320 Batteries, 12 Volts, 9 Amp Hours Each) | 3 Hours 6 Minutes |
- 10000 VA (10 kVA) / 10,000 Watt (10 kW)
- N+1 And Parallel Operation Up To 40 kVA (4 Units In Series)
- Energy Efficient/High Efficiency UPS Mode
- LCD Status Measurements Include Voltage, Frequency, Load Level, Battery Level, Output Current, and Estimated Remaining Backup Time
- Tower With Casters
- Pure Sine Wave Clean Output To Operate And Maximize The Life Of Even The Most Sensitive Electronics
- Online (Double Conversion) - Highest Level Of Protection Available - Battery Power Always Engaged, No Switching Delay (Phase Locked To Input Power Source)
- Wide Frequency Input Range (44-66 Hz Auto Sensing) Allows For Generator Power To Be Used As A Primary Or Secondary Input Power Source (Using Automatic Transfer Switch Before UPS)
- Constant Voltage Regulation (±1%)
- Constant Frequency Regulation (±1 or ±3% Selectable)
- Factory Warranty: 3 Years On Electronics And 1 Year Warranty On Batteries
- Optional Extended Warranty: 5 Years On Electronics And 1 Year Warranty On Batteries
- Digital Signal Processing (DSP) Allows For Greater Reliability Over Older UPS Designs And Superior Electric Noise Filtration
- >0.99 Input Power Factor / 0.9 Output Power Factor (Line Mode) / High Efficiency Mode For Superior Efficiency And Power Savings
- UPS Weight (Excluding Optional External Battery Packs): 294 lbs.
- Dimensions (Inches): 11.4 X 26 X 28 (W x H x D)
- Operating Temperature: 32°-104° F
- Operating Humidity: 20%~95%, Non-Condensing
- Operating Elevation: 3,280 Feet Without De-Rating
- Cold Start Capable (Shipped With Cold Start Disabled, Will Enable Automatically After Receiving Power For The First Time After Shipping)
- cTUVus, cULus, and FCC Certified
- Includes Software For Windows Monitoring & Configuration
Replacement Batteries:
-Leoch DJW12-9.0 (Lead Acid), Leoch LP12-9.0 (Lead Acid), Betta Batteries 6-HCNFJ-7.2 (Lead Crystal), Or Battery Backup Power BBP-LIFEPO4-HDR-12V-7.2AH (Lithium Iron Phosphate)
Do you need a PDF quote or a custom emergency backup solution? Email us at [email protected].
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 26 reviews
Sort
Product Reviews
★★★★★ 3
Not as good as I expected
When it first came, the box fell apart as I was taking it out, and a lot of some kind of dirt or sand kept falling out all over my table and floor. I had the take the entire thing apart and thoroughly wash it.
After drying age reassembling it, I tried it on my portafilter that came with my Breville Barista Express, but, somehow, it doesn't always make the tamping level. You would think with the ridge that rests on the side of the portafilter that it would force it to remain level, but, somehow, it doesn't, at least not consistently. It also has varying lengths (heights, or depths), and a single spring tension, so you may still over tamping or under-tamp. I was expecting it would have a censor that would just detect once it reached 30 lbs of force and cut off after that, similar to a torque screwdriver, but that's not what this is.
I'll still give it 3 stars because, despite the problems mentioned above, it at least produces some amount of consistency, even if that isn't measurable; but, I can't give it 5 stars because of those issues mentioned above.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2025
★★★★★ 5
This is the one.
Size: 58.3mm, Color: Black
As an el Supremo Coffee Geek, I've wasted money on lots of different tampers. Save your money and buy this one or it's equivalent. This thing is heavy duty, solid, well-made, self-leveling, tamps at 30 pounds and is fool-proof even for fools. Also, it's a palm tamper meaning more fun and more satisfying to use as you prep the puck for your morning buzz. Buy it. You will thank me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2024
★★★★★ 5
Super easy to use and takes the guess-work out of getting even pressure on the grounds
Size: 58.3mm, Color: Black, Size: 58.3mm, Color: Black
I have been using a hand tamper for many years and have a good idea of the pressure I am applying to the grounds in the portafilter. I honestly considered spring tampers to be a bit silly. But this tamper really does take the guess-work out of pressing the coffee grounds. The shroud helps guide the press so that pressure is applied even and flat across the surface. With the manual tamper, there will be some play when pressing, or some unevenness in pressure. This is especially true when cranking out many espressos during a breakfast party with friends. Having the spring tamper makes quick work of turning out a lot of coffees with consistency.
There are no instructions for taking this tamper apart to clean inside, and you may not really need to do that very often. After each use, just pull back the shroud (the black piece that moves up and down) and wipe off the tamper (the shiny steel part). This will help prevent grounds from working their way inside. If you do want to take it apart, it’s easy. Pull back the shroud and unscrew the tamper. It will come apart into three pieces. Wipe the pieces off and reassemble. Super quick and easy.
This tamper is very heavy. My scale shows 656 g (about a pound and a half). It fits the portafilter exactly, with no slop. Just place on top of grounds and press!. Don’t even worry about pressure, just push down all the way. Overall I had fun using this tamper versus my manual one. And since I make myself a cappuccino very early in the morning, I don’t have to be very awake to get a good pack on the grounds and get my coffee fast!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2024
★★★★★ 5
It is heavy
Size: 58.3mm, Color: Black
Item was as described and shipped promptly. It is heavy and works well with my portafilter. I haven't had it long enough to really evaluate how helpful it is.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2025
★★★★★ 5
Muy bueno
Muy bueno
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 18, 2025