Zebralight H501w CREE Q3-5A LED Headlamp

Zebralight H501w CREE Q3-5A LED HeadlampThe H501w is a high performance, versatile, all aluminum headlamp with a warm white tint LED. The H501w can also be used as a general purpose angled flashlight without its headband. Three light levels spread far apart, easily selected with a pushbutton switch. Powered with one AA size battery, the H501w can produce a maximum of 80 Lumens of smooth flood light. Main Features and Specifications Light Output: Constant ratio output level spread. Current

The H501w is a high performance, versatile, all aluminum headlamp with a warm white tint LED. The H501w can also be used as a general purpose angled flashlight without its headband. Three light levels spread far apart, easily selected with a pushbutton switch. Powered with one AA size battery, the H501w can produce a maximum of 80 Lumens of smooth flood light.

Main Features and Specifications

• Light Output: Constant ratio output level spread. Current regulated.
  • 80 Lumens (2.3 hr) on High
  • 15 Lumens (19 hr) on Medium
  • 2.7 Lumens (3.5 days) on Low
  Light output and runtimes are measured using a Sanyo 2700 mAh NiMH battery. Light output are out the front values.
• LED: CREE XLamp XR-E Q3 5A
• Weight
  • 21 gram (0.74 oz)
  • 41 gram (1.45 oz) with an alkaline battery
  • 63 gram (2.22 oz) with a battery and headband
• Dimensions
  • Diameter 18.5 mm (3/4”)
  • Height 71.2 mm (2 3/4”)
• Battery: One AA size alkaline, 1.5v lithium primary, NiMH rechargeable, or 3.7v 14500 Li-ion rechargeable. Reverse polarity protection.
• Beam Type: 80 degree flood, with no hotspot
• Constructions
  • Soft touch pushbutton switch, with a minimum operating life of one million cycles.
  • Recessed impact resistant LEXAN polycarbonate lens.
  • Precision 3D machined casing from premium grade Alcoa aluminum alloy billet, light weight with superior structural strength.
  • Electrically conductive aluminum body provides inherent EMI/RFI shielding.
  • Durable hard anodized finish.

Waterproof

• Dust-tight
• Protected against continuous immersion (1 meter, >30 minutes)

Operations

• From Off
  • Press and hold to cycle through Low, Med and High, release to set.
  • Click to High, click again quickly to cycle through Med, Low and High.
• When On
  • Click to Off.
  • Press and hold to cycle through Low, Med and High, release to set.
• When High
  • Double click to toggle between Strobe mode and High.

Accessories in the package

• One black silicone holder with headband
• One glow in the dark silicone holder
• Removable pocket clip
• Two O-rings