7205BMUC3T103K Nachi Angular Contact Bearing Brass 25x52x15mm

7205BMUC3T103K Nachi Angular Contact Bearing Brass 25x52x15mm7205BMUC3T103K Nachi Angular Ball Bearing 40 Contact Angle Brass Cage & Flush Ground 25mm x 52mm x 15mm Made in Japan 7205BMUC3T103K Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 25mm, outer diameter is 52mm and width is 15mm. 7205BMUC3T103K Nachi Ball Bearing Nachi Angular Ball Bearing Radial Clearance: C3 Cage: Brass Cage Dimensions: 25mm x 52mm x 15mm Metric ID (inner

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.