MINELAB Manticore High Power Metal Detector

MINELAB Manticore High Power Metal DetectorThe Minelab Manticore is the detector we reach for when a site has beaten every other machine we own. Built for experienced detectorists who need more out of every sweep, it packs 50% more transmit power than the EQUINOX series, a first of its kind 2D Target ID Map, and full IP68 waterproofing to 5 meters. If you have been waiting for Minelab to outdo itself, the Manticore is that machine. Why Serious Detectorists Choose the Manticore 50% more power

The Minelab Manticore is the detector we reach for when a site has beaten every other machine we own. Built for experienced detectorists who need more out of every sweep, it packs 50% more transmit power than the EQUINOX series, a first-of-its-kind 2D Target ID Map, and full IP68 waterproofing to 5 meters. If you have been waiting for Minelab to outdo itself, the Manticore is that machine.

Why Serious Detectorists Choose the Manticore

• 50% more power than EQUINOX for better depth and target separation
• 2D Target ID Map for real-time ferrous vs. conductive analysis before you dig
• Superior target separation in iron-heavy sites and high-trash ground
• Fully waterproof to 16 ft (IP68) for surf, wading, and all-terrain hunting
• Complete field-ready bundle included with every purchase

What's in the Box at Serious Detecting

• Minelab Manticore High Power Metal Detector with M11 11" Round DD coil and coil skidplate
• ML105 Low-Latency Wireless Headphones with carry case, audio cable, and charging cable
• Magnetic USB charging cable and 5 screen protectors
• Getting started guide
• 3-Year Limited Manufacturer's Warranty
• Free Serious Detecting Field Kit (added automatically at checkout, limit one per detector): finds bag, hand digger with holster, carry bag, shovel, and cap

What the Minelab Manticore Actually Feels Like in the Dirt

Separation in Iron-Heavy Ground

Our team has put the Minelab Manticore through cellar holes in New England, saltwater beaches on the Gulf Coast, and iron-saturated Civil War sites in the mid-Atlantic. The first thing you notice is the separation.

Running the All-Terrain Fast mode at recovery speed 6 through a colonial-era trash layer, we were pulling copper coins from between cut nails at depths where our EQUINOX 800 was giving us a wall of iron grunt. The 2D Target ID Map makes that possible: instead of collapsing ferrous and conductive data into a single number, the Manticore plots them on two axes simultaneously.

A pull tab and a silver dime do not land in the same place on that map. After a few hours in the field you start reading targets the way an experienced eye reads soil stratigraphy.

Depth Stability at Range

Compared to the EQUINOX 900, the depth gain is measurable. On a garden test with planted coins at known depths, the Manticore was consistently picking up silver at an inch or two deeper.

More importantly, its target ID held stable at depth, where the Equinox 900 would start to blur. That stability is the real-world payoff of Multi-IQ+.

Multi-IQ+ and the 2D Target ID Map: What They Actually Do

Multi-IQ+: Broadcasting Every Frequency at Once

Multi-IQ+ is Minelab's simultaneous multi-frequency engine, broadcasting across five discrete frequencies at once: 5, 10, 15, 20, and 40 kHz.

Each frequency reads different target properties best. Low frequencies see deep, large conductors; high frequencies light up small, low-conductors like gold. Multi-IQ+ reads all of them at the same time, so the Minelab Manticore is not sacrificing gold sensitivity to find silver, or vice versa.

The 2D Target ID Map: A Second Axis Changes Everything

The 2D Target ID Map is where the Manticore separates from everything else on the market. Traditional detectors give you one number, typically a conductivity reading. The Manticore gives you a second axis: ferrous content.

The map runs 100 conductive segments on one axis and 50 ferrous segments on the other. A large iron target that reads mid-conductivity on a single-number machine gets plotted high on the ferrous axis, and you can reject it confidently. A non-ferrous target in iron-heavy ground stands out visually.

It is not magic, and you still need experience to read it well. But it gives you more information before you decide to dig, which is the whole game.

How We Run the Minelab Manticore in Different Conditions

Old Parks and Cellar Holes (Coin and Relic Hunting)

This is where the Manticore earns its price. Our go-to setup:

• Search Mode: All-Terrain General
• Sensitivity: 22
• Recovery Speed: 5 (drop to 3 in clean ground for max depth; bump to 6 in tight iron)
• Ground Balance: Auto-Tracking
• Coil: M11 11" Round DD (swap to M8 8x5.5" elliptical in particularly dense iron)

In tight iron, we lean on the 2D map to separate non-ferrous targets that share the same conductivity number as iron oddities. The M11 covers ground well, but slowing down with the M8 elliptical in heavy iron sites makes a real difference in signal clarity.

We have pulled mid-1800s coins from cellar hole fills in heavy clay that had beaten every other machine we tried.

Beach and Saltwater

Wet salt sand is the ultimate test of a multi-frequency machine. Here is how we run it:

• Search Mode: Beach Surf and Seawater
• Sensitivity: 18 to start
• Recovery Speed: 4
• Ground Balance: Auto (lock manually once planted in a stable wet-sand zone)
• Coil: M11 11" Round DD

The ground balance handles wet salt passively, though Continuous Auto can track a bit aggressively in transition zones between dry and wet sand. Locking it manually once you are settled in a stable zone cleans the threshold up considerably.

The IP68 rating to 5 meters means you can chase the surf without thinking twice.

Gold Prospecting

The Goldfield General mode pairs Multi-IQ+ with ground balance optimized for highly mineralized soils. Our starting point:

• Search Mode: Goldfield General
• Sensitivity: 16 (drop to 12 in extreme red-dirt mineralization)
• Ground Balance: Auto-Tracking (switch to manual, pump and lock, in extreme ground)
• Frequency: Multi-IQ+ for general use; 40 kHz single-frequency for small nugget sensitivity
• Coil: M8 8x5.5" elliptical (tighter swing, better on small targets, more agile in rocky ground)

The 40 kHz single-frequency option gives you pinpoint sensitivity to small gold at the cost of some depth on larger targets. It is worth toggling into when you are in known gold-bearing ground and want every edge on small material.

Trashy Modern Parks and High-EMI Sites

Urban parks with decades of modern trash are a grind on any machine. Our setup for high-trash and high-interference environments:

• Search Mode: All-Terrain Trash Reject
• Sensitivity: 16 to 20 (only as high as the machine stays stable)
• Recovery Speed: 7
• Noise Cancel: Continuous Auto
• Coil: M11 11" Round DD

The 2D map matters most here: modern aluminum trash clusters in a predictable zone on the ferrous axis, and you learn to skip it quickly. In parks that other detectorists have hammered for years, the Manticore's depth and target separation continue to produce.

Build Quality and All-Day Ergonomics

Weight and Shaft

At 2.9 lbs, the Minelab Manticore is not a lightweight machine, but Minelab balanced it well. The carbon-fiber three-piece shaft collapses to 24.8 inches for transport and extends to 56.7 inches for a comfortable swing.

Armrest and Controls

The SCORPION armrest adjusts to lock your arm at the right angle, which matters over a long day. The flashlight and backlit keypad are genuinely useful for early-morning or post-sunset hunts, and the handgrip vibration gives you a tactile signal in loud environments where headphones are not practical.

Battery Life

Battery life runs approximately 10 hours on a full charge from the magnetic USB connector, enough for a full day in the field on a single charge.

Audio Your Way

Tone Options

The Minelab Manticore gives you more audio control than any previous Minelab detector. Choose from 1, 2, or 5 discrete tones, or switch to 1-, 2-, or 5-region All Tones for a proportional audio response across the full target ID range.

VCO and Threshold

VCO (Continuous Pitch) audio with a true threshold tone is available for the analog-style hunters who want every nuance of a signal. Assign pitch, volume, and ferrous volume per region independently.

Headphones and Wired Output

The included ML105 wireless headphones have low-latency Bluetooth that keeps audio in sync with your swing. A 3.5 mm jack is also available for wired use.

Coil Recommendations from Real Use

M11 11" Round DD (Included)

The included M11 11-inch Round DD is the right starting point for most sites. It covers ground efficiently, balances well on the shaft, and handles moderate iron without issues.

M8 8x5.5" Elliptical (Optional)

For dense iron sites and gold prospecting, the M8 tightens your search field and improves sensitivity to small targets. It is our pick for rocky ground and sites where the M11 is picking up too much chatter from closely spaced iron.

M15 15x12" Elliptical (Optional)

For open fields and plowed farmland where you want maximum coverage, the M15 opens up ground substantially and adds depth on large deep targets. All three coils are fully waterproof and manufactured to Minelab's DD design specification.

Minelab Manticore Specifications

• Technology: Multi-IQ+ Simultaneous Multi-Frequency (5, 10, 15, 20, 40 kHz + Multi)
• Target ID: 2D: 100 Conductive x 50 Ferrous segments, 0-99 conductive scale
• Search Modes: 10 presets (5 All-Terrain, 4 Beach, 1 Goldfield) + 10 custom profiles
• Recovery Speed: 0-8 | Sensitivity: 1-35 | Ground Balance: 1-35
• Audio: 1/2/5 tones, 1/2/5 region All Tones, VCO; ML105 wireless headphones included
• Waterproof: IP68 to 5 m (16 ft)
• Weight: 1.3 kg (2.9 lbs) | Length: 56.7 in extended / 24.8 in collapsed
• Battery: Built-in Li-Ion 3.7 V / 6800 mAh, approx. 10 hours; magnetic USB charging
• Display: Full-color LCD, auto and manual backlight (1-10), keypad backlight, flashlight
• Software: Upgradeable via USB (Windows and Mac)
• Operating Temperature: -10°C to +40°C (14°F to 104°F)
• Standard Coil: M11 11" Round DD (waterproof)
• Warranty: 3-year limited manufacturer's warranty

Why Buy the Minelab Manticore from Serious Detecting

We are an authorized Minelab dealer, which means your 3-year warranty is fully protected and your unit arrives complete with all factory accessories.

Our team detects: when you call with a question about settings for a specific site or soil type, you will get a real answer from someone who has been in the field with this machine, not a script reader.

Every Manticore ships with free US shipping, a 30-day return window, and our price-match guarantee. If you find a lower price at another authorized US dealer, reach out and we will match it.