Solidskim Wall Putty -25kg

Solidskim Wall Putty -25kgSOLIDSKIM White Cement Based Smooth,Water based Wall Putty BENEFITS SOLIDSKIM White Cement Based Smooth, Water Based Wall Putty > Synthetically bound ready to use compound for inert filler material. > Only precise quantity of water to be added. > Ensures use on all common types of building interiors. > Excellent adhesion. > Excellent thixotropicness. > Due to good bonding property it is more durable. > Excellent whiteness, so gives good exposure. >

SOLIDSKIM
White Cement Based Smooth,Water based Wall Putty

BENEFITS
SOLIDSKIM
White Cement Based Smooth, Water-Based Wall Putty
> Synthetically bound ready to use compound for inert 
    filler material.
> Only precise quantity of water to be added.
> Ensures use on all common types of building
    interiors.
> Excellent adhesion.
> Excellent thixotropicness.
> Due to good bonding property it is more durable.
> Excellent whiteness, so gives good exposure.
> Excellent finishing and easy to apply.
> Completely applied putty will not allow water
    penetration.
> Provides smooth, silky and featheredged finish to
    substrate to facilitate better texture of paint.
> Application of SOLIDSKIM with workmanship makes 
    exterior and interior look aesthetic.
> No curing is required.
> Prevents growth of algae and fungi on walls.
> It is in dry powder form and does not produce any
    kind of filth smell at the time of application.
DESCRIPTION
SOLIDSKIM is a white cement based, water resistant, 
which requires precise quantity of water to make a putty 
as an inert material for substrate. This is especially used 
to seal the pin holes and the blow holes getting 
exposed on concrete / plastered surfaces. Also it gives 
more adhesion strength and increases the life of paints.
USES
SOLIDSKIM is suitable for:
> Use on both precast and concrete structures like
    sand cement plaster, level brick work and block 
    work, exposed concrete.
> Plywood.
> AC sheets.
> Gypsum boards.
> Can be applied for redecoration on firm, old 
    painted areas.
PACKING & COVERAGE
SOLIDSKIM is available in 20 kg and 25 kg HDPE bag. 
SOLIDSKIM has a coverage of 0.7 ~ 0.8 m² / kg when 
applied at a thickness of 1 mm.
SPECIFICATION
SOLIDSKIM is a white cement based, water resistant  
requiring precise quantity of water for substrates and is 
an inert filler material available in 20 and 25 kg plastic 
ined sacks having a coverage of 0.7 ~ 0.8 m² / kg at 1 
mm thickness, used strictly in accordance with the 
instruction of SOLID.
SHELF LIFE & STORAGE
SOLIDSKIM will have a shelf life of 12 months in 
unopened container when kept in dry conditions at a 
temperature between 5 ~ 45 °C. Storage at higher 
temperature or high humidity may reduce shelf life.
HEALTH & SAFETY
SOLIDSKIM is non toxic and non flammable. However, 
splashes on the skin should be washed well with water 
and if contact with eye occurs, wash well with water and 
seek medical advice (for more detail please refer 
MSDS)

HOW TO USE  
Surface Preparartion : Make sure that the surface is 
absolutely clean, dry and free from dust, grease and 
foreign materials. There should be a time gap of atleast 
10 days before SOLIDSKIM application is done on 
newly plastered surfaces. Ensure that the surface is fairly 
even. If concrete surface is to be painted, it shall be 
washed with a water jet and all loose concrete should 
be getting removed and all pin holes and blow holes 
should get opened.
Application : SOLIDSKIM is ready to use material. 
Water Resistant Skim Coat + 300 ~ 320 gms of water for 
1kg powder of SOLIDSKIM / tertene. Apply the 
prepared material with putty knife from bottom to top 
by ensuring complete filling of holes with putty material 
and feather-edged finish. The coating should be about 1 
mm thick. Second coat of SOLIDSKIM depends up on 
the exposed surface after first coat (generally both coat 
do not exceed 2 mm) and leave the surface to dry 
overnight. The drying time of each coat should be 3 
hours, but will vary from surface to surface (depending 
upon 
atmospheric condition).
Finishing : Make sure that the material has fully covered 
the substrate and dried. If putty applied surface is 
rough, surface should be made smooth by rubbing 
suitable emery paper on it. Ensure that the paper is fine 
and does not cause scratches on the SOLIDSKIM 
coating area. The SOLIDSKIM area is now ready for 
painting.
Painting : The smooth surface finished with                   
SOLIDSKIM does not require any putty or primer 
before paint application. Just apply any paint as per the 
manufacturer’s standard specification. Intact      painting 
can commence withing a few hours of SOLIDSKIM.
QUALITY ASSURANCE
SOLID manufactures the entire range of construction 
chemical under compliance of SIRIM and other               
international standards (ASTM, BS, GBI, LEED).
TECHNICAL SERVICES
While new advance and changes will take place but one 
thing will never change is quality and meeting special 
needs of our customers. Our technical personnel and 
experts are available to provide additional information 
and technical assistance. We are eager to work with you 
in development of new product and resolve your    
problem.
Disclaimer : The information provided in the data sheets is based on both current development of work and years of field experience. Efforts are made