Pay in installments of $1003.62 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Baileigh High Speed Drill Press DP-1250VS-HSThe DP 1250VS HS is a high speed version of the DP 1250VS from Baileigh Industrial. The reason for the high speed is to allow any shop to enjoy the process of thermal friction drilling. This is a unique process in which a bit actually melts through the material and creates walls that can then be tapped. But in order to use this process, the bit must be turning more than 3000 rpm. This is where the DP 1250VS HS high speed drill press comes in.
The DP-1250VS-HS is a high speed version of the DP-1250VS from Baileigh Industrial. The reason for the high speed is to allow any shop to enjoy the process of thermal friction drilling. This is a unique process in which a bit actually melts through the material and creates “walls” that can then be tapped. But in order to use this process, the bit must be turning more than 3000 rpm. This is where the DP-1250VS-HS high speed drill press comes in.
****Baileigh Industrial now carries a full line of thermal friction drills and taps!!!!
The DP-1250VS-HS shares all the exact same features as its brother and would be perfect for anybody looking to upgrade their current drill. The DP-1250VS-HS from Baileigh Industrial is a 20” drill press that has a capacity of 1-1/4” mild steel. It uses 220 volt single phase power to run a Delta® inverter. The inverter regulates the amount of power and rpms to the spindle. Using an inverter to drive its massive mt4 spindle gives the DP-1250VS-HS the ability to set rpm to an exact speed; from 0 to 4000. It also has a quality auto reversing tap feature.
The DP-1250VS-HS uses a heavy duty cast iron base that has a coolant system built right in. The DP-1250VS-HS also has a 4-1/2” wide column that was designed to minimize the flex. The work table has been machined, polished and has t-slots for your work holding device.
Other features include an mt4 taper and chuck, a spindle safety shield with limit switch and halogen work light. Contact a Baileigh Industrial representative for more information on the DP-1250VS-HS high speed drill press or if you have question about thermal friction drilling, today.
| Motor | 2 hp |
|---|---|
| Quill Diameter | 2.95" |
| Spindle Nose to Table | 36.41" |
| Spindle Nose to Base | 48.22" |
| Spindle Speed High | 245 - 4000 rpm |
| Spindle Speed Low | 100 to 1070 rpm |
| Spindle Taper | MT 4 |
| Table Slot | .625" |
| Tapping Capacity | 3/4" |
| Motor Coolant | 1/8 hp |
| Power | 220V / 1-phase |
| Shipping Weight | 847 LBS |
| Swing | 20.8" |
| Drill Capacity | 1.5" |
| Spindle Travel | 5.9" |
| Column Diameter | 4.52" |
| Base Dimensions L x W | 27" x 19" |
| Shipping Dimensions | 40" x 25" x 83" |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy