Maton Guitars PRE-OWNED SRS-60C Dreadnought - 16531

Maton Guitars PRE-OWNED SRS-60C Dreadnought - 16531Maton Guitars PRE OWNED SRS 60C Dreadnought 16531 This gently used 2020 Maton Dreadnought Cutaway was originally purchased from Artisan Guitars. It has no play wear on the frets, some light pick marks on the pick guard, and the typical (modest) glossing of the satin nitro finish in spots on the back from handling. Everything else would appear to be "as new", the original hard shell case, setup to factory specs, plays and works like a new Maton at a

Maton Guitars PRE-OWNED SRS-60C Dreadnought - 16531

This gently used 2020 Maton Dreadnought Cutaway was originally purchased from Artisan Guitars. It has no play wear on the frets, some light pick marks on the pick guard, and the typical (modest) glossing of the satin nitro finish in spots on the back from handling.

Everything else would appear to be "as new", the original hard-shell case, setup to factory specs, plays and works like a new Maton at a great price.

Originally used as a Mahogany "substitute", Queensland Maple has become the backbone of the Maton sound. It is used in nearly every Maton either as a neck, back & sides, or internal component.

A rainforest hardwood from Northern Queensland, this timber is light, strong, and visually striking. Queensland Maple is extremely well balanced with an even response across all frequencies. If you are looking for the secret to Maton's great tone, this is a good place to start. Combined with the Sitka Spruce top you have a powerful yet balanced full sized dreadnought.

Not many builders offer a full sized dreadnought with a cutaway option, though Maton has been listening to performers longer than most guitar luthiers. They understand player's needs and build the quality tools to support their music.

A forward shifting of the X braces and the shifting of scallop peaks to nodal points around the soundboard help to enhance the vibration of the top. The shifting of the X braces also allows the inclusion of a second, parallel tone bar which allows the scalloping of both tone bars, and spreads the load while reducing mass.
 
Adjusted bracing heights as well as a locked15 foot radius for the arch of the back, gave Maton the plate resonance separation they look for between top and back.

In its 5th generation, the AP5 Original features a 6-Piezo bridge input, with 3-Band EQ controls that allow for a maximum range of blending the Bass register through high end Trebles.

Using the ‘Sweep-able Mid’ controls. Mid-range is sweep-able from 600Hz to 2.4kHz and can be cut or boosted within this range. As a general rule we start out with all settings ‘flat’ then alter them to achieve the desired tone & presence based on the venue or recording environment. For example, an open, natural sound can be achieved by setting the frequency control at 1.4khz and the boost/cut control at 5db. Alternatively, for a ‘thick’ lead sound boost your Mid's by 5 db and set the frequency dial at 1.7kh.

Specifications: