Subaru & Toyota 6-Pin Accelerator Pedal (APP) & Wastegate Connector Kit

Subaru & Toyota 6-Pin Accelerator Pedal (APP) & Wastegate Connector KitIs your throttle feeling unresponsive or is your Hilux struggling with boost control? This TS 025 Sealed Series 6 pin connector is the factory standard for Drive By Wire (DBW) Accelerator Pedal Position Sensors and specific Turbo Wastegate Actuators. Because this plug is located either in the footwell (on the pedal) or near the high heat environment of the turbocharger, the plastic clips are prone to becoming brittle and snapping. A loose connection

Is your throttle feeling unresponsive or is your Hilux struggling with boost control? This TS 025 Sealed Series 6-pin connector is the factory standard for Drive-By-Wire (DBW) Accelerator Pedal Position Sensors and specific Turbo Wastegate Actuators.

Because this plug is located either in the footwell (on the pedal) or near the high-heat environment of the turbocharger, the plastic clips are prone to becoming brittle and snapping. A loose connection here is more than just an inconvenience—it’s a safety risk. This kit allows you to completely refresh the connection, ensuring the ECU receives a stable, uninterrupted signal from your right foot or your wastegate actuator.

Compatibility & Fitment

This 6-pin weatherproof connector is a direct OEM-spec replacement for:

• Subaru: Drive-By-Wire (DBW) Accelerator Pedal Position (APP) Sensors (2008+ Models).

• Toyota: DBW Accelerator Pedal Position (APP) Sensors.

• Toyota Hilux & Hiace: Turbo Wastegate Actuator interface.

• OEM P/N: 6189-1083 / 12303WQA06F-B.

• Toyota Cross-Reference: 90980-12303.

• Nissan Cross-Reference: J-48817-1154.

What’s in the Box?

• 1x Connector Body (6-Pin)

• 6x High-Conductivity Terminals

• 6x Weather-Tight Cable Seals

Installation

• Crimp Tool: For sensitive throttle and boost control signals, a perfect crimp is non-negotiable to prevent signal "noise." We recommend using the Sargent 1026CT crimp tool for a professional, gas-tight finish.